EN 14034-3:2006
(Main)Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds
Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds
This standard describes a test method for the determination of the lower explosion limit of dust clouds in a closed vessel under defined initial conditions of pressure and temperature.
This method is not suitable for use with recognised explosives, like gunpowder and dynamite, explosives which do not require oxygen for combustion, pyrophoric substances, or substances or mixtures of substances which may under some circumstances behave in a similar manner. Where any doubt exists about the existence of hazard due to explosive properties, expert advice should be sought.
Bestimmung der Explosionskenngrößen von Staub/Luft-Gemischen - Teil 3: Bestimmung der unteren Explosionsgrenze UEG von Staub/Luft-Gemischen
Diese Norm legt ein Prüfverfahren fest für die Bestimmung der unteren Explosionsgrenze von Staubwolken in
einem geschlossenen Behälter unter definierten Anfangsbedingungen von Druck und Temperatur.
Dieses Verfahren ist nicht geeignet für Sprengstoffe, wie Schießpulver und Dynamit sowie Stoffe, die ohne
Sauerstoff verbrennen, pyrophore Stoffe oder Stoffe bzw. Stoffgemische, die sich unter bestimmten
Umständen ähnlich verhalten. Wenn Zweifel über eventuell vorhandene Gefährdungen durch die
Explosionswirkung bestehen, sollten Fachleute zu Rate gezogen werden.
Détermination des caractéristiques d'explosion des nuages de poussière - Partie 3: Détermination de la limite inférieure d'explosivité LIE des nuages de poussière
La présente Norme spécifie une méthode d’essai pour déterminer la limite inférieure d’explosivité des nuages de
poussière dans un récipient fermé, dans des conditions initiales de pression et de températures définies.
Cette méthode ne convient pas aux explosifs reconnus comme tels, comme la poudre et la dynamite, aux explosifs
dont la combustion ne nécessite pas d’oxygène, aux substances pyrophoriques ou aux substances et mélanges de
substances pouvant, dans certaines circonstances, se comporter de manière similaire. Lorsqu’il existe un doute sur
l’existence d’un phénomène dangereux en raison de propriétés explosives, il convient de faire appel à l’avis
d’experts.
Ugotavljanje eksplozijskih značilnosti oblakov prahu – 3. del: Ugotavljanje spodnje meje eksplozivnosti SME oblakov prahu
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust cloudsDétermination des caractéristiques d'explosion des nuages de poussiere - Partie 3: Détermination de la limite inférieure d'explosivité LIE des nuages de poussiereBestimmung der Explosionskenngrößen von Staub/Luft-Gemischen - Teil 3: Bestimmung der unteren Explosionsgrenze UEG von Staub/Luft-GemischenTa slovenski standard je istoveten z:EN 14034-3:2006SIST EN 14034-3:2006en13.230ICS:SLOVENSKI
STANDARDSIST EN 14034-3:200601-september-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14034-3May 2006ICS 13.230 English VersionDetermination of explosion characteristics of dust clouds - Part3: Determination of the lower explosion limit LEL of dust cloudsDétermination des caractéristiques d'explosion des nuagesde poussière - Partie 3: Détermination de la limite inférieured'explosivité LIE des nuages de poussièreBestimmung der Explosionskenngrößen von Staub/Luft-Gemischen - Teil 3: Bestimmung der unterenExplosionsgrenze UEG von Staub/Luft-GemischenThis European Standard was approved by CEN on 20 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14034-3:2006: E
Electro Pneumatic Valve.17 Annex B (normative)
Dust disperser with 5 mm holes.19 Annex C (normative)
20 l sphere.22 C.1 General.22 C.2 Test apparatus.22 C.3 Test conditions.23 C.4 Test procedure.23 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 94/9/EC.25 Bibliography.26 Figures Figure 1 — 1 m³ vessel (schematic).8 Figure 2 — Dust container with blasting cap activated valve as commonly used for explosion suppression (schematic; it is commercially available).9 Figure 3 — Location of the 6 mm holes in the dust disperser.11 Figure 4 — Dust dispersion and pressure-time curve.13 Figure 5 — Determination of the lower explosion limit LEL.14 Figure A.1 — Electro Pneumatic Valve (schematic).17 Figure A.2 — Discharge characteristic of dust dispersers (without dust).18
Annex II, Clause 1.0.1 Directive 98/37/EC of the European Parliament and the Council of June 22, 1998 on the approximation of the laws of the member states relating to machinery Annex I, Clause 1.5.7
This method is not suitable for use with recognised explosives, like gunpowder and dynamite, explosives which do not require oxygen for combustion, pyrophoric substances, or substances or mixtures of substances which may under some circumstances behave in a similar manner. Where any doubt exists about the existence of hazard due to explosive properties, expert advice should be sought. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 14460, Explosion resistant equipment 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 dust small solid particles in the atmosphere which settle out under their own weight, but which may remain suspended in air for some time (includes dust and grit, as defined in ISO 4225) NOTE Generally maximum particle size will not exceed 500 µm. 3.2 combustible dust dust able to undergo an exothermic reaction with air when ignited NOTE The terms “flammable” and “combustible” are used synonymously. 3.3 explosion pressure pex highest overpressure occurring during an explosion of a dust cloud in a closed vessel 3.4 explosive atmosphere mixture with air, under atmospheric conditions, of flammable (combustible) substances in the form of gases, vapours, mists or dusts, in which, after ignition has occurred, combustion spreads to the entire unburned mixture 3.5 ignition delay tv time between the initiation of the dust dispersion and the activation of the ignition source 3.6 initial pressure pi pressure in the explosion vessel at the moment of ignition
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.