Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings

This part of EN 1559 specifies the additional technical delivery conditions for steel castings unless other conditions have been agreed at the time of enquiry and order.
This European Standard is also applicable to nickel and cobalt alloy castings.

Gießereiwesen - Technische Lieferbedingungen - Teil 2: Zusätzliche Anforderungen an Stahlgussstücke

Dieser Teil von EN 1559 legt die zusätzlichen technischen Lieferbedingungen für Stahlgussstücke fest, soweit nicht zum Zeitpunkt der Anfrage und Bestellung andere Bedingungen vereinbart wurden.
Dieser Teil von EN 1559 gilt auch für Gussstücke aus Nickel- und Kobaltlegierungen.

Fonderie - Conditions techniques de fourniture - Partie 2: Spécifications complémentaires pour les pièces moulées en acier

La présente partie de l'EN 1559 spécifie les conditions techniques complémentaires de fourniture pour les pièces moulées en acier, à moins que d'autres conditions aient été convenues au moment de l'appel d'offres et de la commande.
La présente norme peut aussi être utilisée pour les pièces moulées en alliages de nickel et de cobalt.

Livarstvo - Tehnični dobavni pogoji - 2. del: Dodatne zahteve pri jeklenih ulitkih

Ta del standarda EN 1559 določa dodatne tehnične dobavne pogoje za jeklene ulitke, razen če je bil v času povpraševanja in naročila sklenjen dogovor o drugih pogojih.
Ta del standarda EN 1559 se uporablja tudi za ulitke iz nikljeve in kobaltove zlitine.

General Information

Status
Published
Publication Date
30-Sep-2014
Current Stage
9093 - Decision to confirm - Review Enquiry
Due Date
18-Dec-2013

RELATIONS

Buy Standard

Standard
EN 1559-2:2014
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gießereiwesen - Technische Lieferbedingungen - Teil 2: Zusätzliche Anforderungen an StahlgussstückeFonderie - Condition techniques de fourniture - Partie 2: Spécifications complémentaires pour les pièces moulées en acierFounding - Technical conditions of delivery - Part 2: Additional requirements for steel castings77.140.80Železni in jekleni ulitkiIron and steel castingsICS:Ta slovenski standard je istoveten z:EN 1559-2:2014SIST EN 1559-2:2014en,fr,de01-december-2014SIST EN 1559-2:2014SLOVENSKI

STANDARDSIST EN 1559-2:20001DGRPHãþD
SIST EN 1559-2:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1559-2
October 2014 ICS 77.140.80 Supersedes EN 1559-2:2000English Version

Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings

Fonderie - Conditions techniques de fourniture - Partie 2: Spécifications complémentaires pour les pièces moulées en acier

Gießereiwesen - Technische Lieferbedingungen - Teil 2: Zusätzliche Anforderungen an Stahlgussstücke This European Standard was approved by CEN on 18 July 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1559-2:2014 ESIST EN 1559-2:2014

EN 1559-2:2014 (E) 2 Contents Page Foreword ..............................................................................................................................................................3 Introduction .........................................................................................................................................................4 1 Scope ......................................................................................................................................................5 2 Normative references ............................................................................................................................5 3 Terms and definitions ...........................................................................................................................6 4 Information to be supplied by the purchaser .....................................................................................8 4.1 • jandatory information ........................................................................................................................8 4.2 •• lptional information ..........................................................................................................................8 4.3 v arawingsf patterns and tools ............................................................................................................8 4.4 v fnformation on the mass ....................................................................................................................8 4.5 v mreliminary sample .............................................................................................................................8 4.6 v fnitial sample .......................................................................................................................................8 5 Designations ..........................................................................................................................................8 6 janufacture ............................................................................................................................................8 6.1 janufacturing process .........................................................................................................................8 6.2 Welding operations................................................................................................................................8 6.3 Further processing ................................................................................................................................9 7 Requirements .........................................................................................................................................9 7.1 v deneral ................................................................................................................................................9 7.2 jaterial ...................................................................................................................................................9 7.3 Casting ................................................................................................................................................. 11 8 Inspection ............................................................................................................................................ 14 8.1 vdeneral .............................................................................................................................................. 14 8.2 v qype of inspection documents and type of inspection ............................................................... 14 8.3 v qest unit ............................................................................................................................................ 14 8.4 Samples ............................................................................................................................................... 14 8.5 Test procedures .................................................................................................................................. 16 8.6 v fnvalidation of test results .............................................................................................................. 17 8.7 Retests ................................................................................................................................................. 17 8.8 v porting and reprocessing ............................................................................................................... 18 9 jarking ................................................................................................................................................ 18 10 v mackaging and surface protection ................................................................................................. 18 11 v Complaints ....................................................................................................................................... 18 Annex A (informative)

jandatory and/or optional information checklist .................................................. 19 Annex B (informative)

Significant technical changes between this European Standard and the previous edition .................................................................................................................................. 23 Bibliography ..................................................................................................................................................... 24

SIST EN 1559-2:2014

EN 1559-2:2014 (E) 3 Foreword This document (EN 1559-2:2014) has been prepared by Technical Committee ECISS/TC 111 “Steel castings and forgings”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2015 and conflicting national standards shall be withdrawn at the latest by April 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1559-2:2000. Within its programme of work, Technical Committee ECISS/TC 111 included the revision of the following standard: EN 1559-2, Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings Annex B provides details of significant technical changes between this European Standard and the previous edition. This European Standard is one of a series of European Standards for technical delivery conditions for castings. The other standards in this series are: — EN 1559-1, Founding - Technical conditions of delivery - Part 1: General; — EN 1559-3, Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings; — EN 1559-4, Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium castings; — EN 1559-5, Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium castings; — EN 1559-6, Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc castings. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

SIST EN 1559-2:2014

EN 1559-2:2014 (E) 4 Introduction In order to assist manufacturers and purchasers to prepare proper contractual arrangements and prevent misunderstanding, CEN/TC 190 approved the preparation of a series of standards covering technical delivery conditions. These have been prepared as separate parts. This European Standard covers the additional technical delivery conditions for all the steel casting materials and has the same structure for clauses as EN 1559-1 “Founding - Technical conditions of delivery – Part 1: General”. This European Standard cannot be used alone for compiling a specification for ordering and supplying steel castings, but as a complement to EN 1559-1. The structure of this European Standard is as follows: — clauses and subclauses preceded by v indicate no additional conditions to EN 1559-1:2011; — clauses and subclauses marked with a single dot • indicate that conditions shall be agreed at the time of enquiry and order; — subclauses and paragraphs marked with two dots •• indicate that conditions can be agreed at the time of enquiry and order (optional); — subclauses without dot marking are mandatory. Annex A gives a checklist for quick information about different points that shall or may be agreed by the time of acceptance of the order. It relates to the applicable clauses or subclauses of EN 1559-1:2011 and EN 1559-2:2014. SIST EN 1559-2:2014

EN 1559-2:2014 (E) 5 1 Scope This part of EN 1559 specifies the additional technical delivery conditions for steel castings unless other conditions have been agreed at the time of enquiry and order. This European Standard is also applicable to nickel and cobalt alloy castings. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1369, Founding - Magnetic particle testing EN 1370, Founding - Examination of surface condition EN 1371-1, Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings EN 1371-2, Founding - Liquid penetrant inspection - Part 2: Investment castings EN 1559-1:2011, Founding - Technical conditions of delivery - Part 1: General EN 10027-1, Designation systems for steels - Part 1: Steel names EN 10027-2, Designation systems for steels - Part 2: Numerical system EN 12680-1, Founding - Ultrasonic examination - Part 1: Steel castings for general purposes EN 12680-2, Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components EN 12681, Founding - Radiographic examination EN 13018, Non-destructive testing - Visual testing - General principles EN 14784-1, Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems EN 14784-2, Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays EN ISO 148-1, Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1) EN ISO 3452-1, Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1) EN ISO 3651-1, Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1) EN ISO 3651-2, Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2) SIST EN 1559-2:2014

EN 1559-2:2014 (E) 6 EN ISO 5579, Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579) EN ISO 6506-1, Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1) EN ISO 6892-1, Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1) EN ISO 6892-2, Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2) EN ISO 9712, Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712) EN ISO 9934-1, Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1) EN ISO 16810, Non-destructive testing - Ultrasonic testing - General principles (ISO 16810) EN ISO 19232-1, Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1559-1:2011 and the following apply. 3.1

purchaser v
3.2 manufacturer v
3.3 casting v
3.4 as-cast casting v
3.5 as-delivered casting v
3.6 initial sample v
3.7 preliminary sample v
3.8 relevant wall thickness v
SIST EN 1559-2:2014
EN 1559-2:2014 (E) 7 3.9 inspection v
3.10 continuous inspection v
3.11 inspection representative v
3.12 test unit v
3.13 sample casting v
3.14 sample v

Note 1 to entry: In steel foundry industry the term used for sample is “test block”. 3.15 test piece v

3.16 sequential testing v
3.17 acceptance criteria v
3.18 drawing v
3.19 finishing welding v
3.20 joint welding v

3.21 excavation cavity produced by the removal of cast material prior to subsequent welding Note 1 to entry: It can be of minor or major nature according to its depth (over 40 % of the section thickness the excavations are major). SIST EN 1559-2:2014

EN 1559-2:2014 (E) 8 4 Information to be supplied by the purchaser 4.1 • jandatory information In addition to EN 1559-1:2011, the relevant wall thickness shall be given in the order. 4.2 •• lptional information In addition to EN 1559-1:2011, for specific uses, some optional requirements may become mandatory according to the product standards. 4.3 v arawingsf patterns and tools 4.4 v fnformation on the mass 4.5 v mreliminary sample 4.6 v fnitial sample 5 Designations Cast steels shall be designated in accordance with EN 10027-1 and EN 10027-2. NOTE Designations of steel casting materials are given in the applicable product standards. 6 janufacture 6.1 janufacturing process 6.1.1 jelting The steel or alloy shall be produced by an electric melting process or by any other process involving secondary refining. 6.1.2 •• eeat treatment 6.1.2.1 The type of heat treatment is usually defined by the product standard. If this information is not available, the heat treatment type can be agreed between the purchaser and the manufacturer. 6.1.2.2 If required, the purchaser shall be informed of the heat treatment conditions. 6.2 Welding operations 6.2.1 v deneral 6.2.2 v mroduction welding 6.2.2.1 v 6.2.2.2 v SIST EN 1559-2:2014

EN 1559-2:2014 (E) 9 6.2.2.3 v 6.2.2.4 v 6.2.2.5 v In addition to EN 1559-1:2011 major production welds may be reported by indicating their location and extent in the form of drawings, sketches or photographs. If agreed between the manufacturer and the purchaser, the documents related to the production welding shall be supplied to the purchaser. 6.2.2.6 v 6.2.2.7 •• Criteria for excavation Criteria other than those defined in 3.21 can be agreed. 6.3 Further processing Unless previously agreed the manufacturer shall not be held responsible for the consequences of any further processing, e.g. welding, heat treatment, etc. undertaken by the purchaser after delivery of the castings by the manufacturer. 7 Requirements 7.1 v deneral 7.2 jaterial 7.2.1 Chemical composition In addition to EN 1559-1:2011, Table 1 specifies permissible deviations above the maximum limits or below the minimum limits of the chemical requirements of the applicable product specification for the results of product analysis carried out on test blocks or on the product itself. NOTE 1 Table 1 does not apply to cast analysis as specified in the product standards. For the term cast analysis the term heat analysis can be used. NOTE 2 For methods of determination of the chemical composition, see CEN/TR 10261. SIST EN 1559-2:2014

EN 1559-2:2014 (E) 10 Table 1 — Permissible deviations above the maximum or below the minimum limits of the chemical requirements of the applicable product specification for the results of product analysis Element Specified range (mass fraction in %) Permissible deviations (mass fraction in %) Element Specified range (mass fraction in %) Permissible deviations (mass fraction in %) Carbon ≤ 0,030 + 0,005 Copper ≤ 2,00 ±0,10

> 0,030 ≤ 0,080 ±0,01
> 2,00 ≤ 5,00 ±0,20
> 0,080 ≤ 0,30 ±0,02 Nitrogen ≤ 0,30 ±0,02
> 0,30 ≤ 0,60 ±0,03 Niobium ≤ 1,00 ±0,05
> 0,60 ≤ 1,20 ±0,05
> 1,00 ±0,10
> 1,20 ≤ 2,00 ±0,06 Molybdenum ≤ 1,00 ±0,07
> 2,00 ±0,08
> 1,00 ≤ 2,00 ±0,10 Silicon ≤ 2,00 ±0,10
> 2,00 ≤ 5,00 ±0,15
> 2,00 ±0,20
> 5,00 ≤ 10,00 ±0,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.