EN 13880-11:2003

Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements

This European Standard describes a method for preparing asphalt blocks intended for testing of joint sealants according to prEN 13880-7 and prEN 13880-9.

Heiß verarbeitbare Fugenmassen - Teil 11: Prüfverfahren zur Herstellung von Asphalt-Probekörpern zur Verwendung in der Funktionsprüfung und zur Bestimmung der Verträglichkeit mit Asphalten

Diese Europäische Norm beschreibt ein Verfahren zur Herstellung von Asphalt-Grundkörpern für die Prüfung von Fugenmassen nach prEN 13880 7 und prEN 13880 9.

Produits de scellement de joints appliqués à chaud - Partie 11 : Méthode d'essai pour la préparation des blocs d'enrobés destinés au test fonctionnel et pour la détermination de compatibilité avec les revêtements bitumineux

Cette Norme européenne décrit une méthode pour la préparation des blocs d'enrobés destinés aux produits de scellement de joints conformément au prEN 13880-7 et à l'EN 13880-9.

Toplo nanosljive tesnilne mase za stike – 11. del: Preskusna metoda za pripravo preskusnih asfaltnih blokov za preskuse funkcionalnosti in za ugotavljanje združljivosti z asfaltnimi vozišči

General Information

• Status: Published
• Publication Date: 10-Jun-2003
• Withdrawal Date: 30-Mar-2005
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13880-11:2004 - Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WDYOMDQMHHeiß verarbeitbare Fugenmassen - Teil 11: Prüfverfahren zur Herstellung von Asphalt-Probekörpern zur Verwendung in der Funktionsprüfung und zur Bestimmung der Verträglichkeit mit AsphaltenProduits de scellement de joints appliqués a chaud - Partie 11 : Méthode d'essai pour la préparation des blocs d'enrobés destinés au test fonctionnel et pour la détermination de compatibilité avec les revetements bitumineuxHot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-11:2003SIST EN 13880-11:2004en01-junij-2004SIST EN 13880-11:2004SLOVENSKI
STANDARD



SIST EN 13880-11:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-11June 2003ICS 93.080.20English versionHot applied joint sealants - Part 11: Test method for thepreparation of asphalt test blocks used in the function test andfor the determination of compatibility with asphalt pavementsProduits de scellement de joints appliqués à chaud - Partie11: Méthode d'essai pour la préparation des blocsasphaltiques destinés au test fonctionnel et pour ladétermination de compatibilité avec les revêtementsbitumineuxHeiß verarbeitbare Fugenmassen - Teil 11: Prüfverfahrenzur Herstellung von Asphalt-Probekörpern zur Verwendungin der Funktionsprüfung und zur Bestimmung derVerträglichkeit mit AsphaltenThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-11:2003 ESIST EN 13880-11:2004



EN 13880-11:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Apparatus.45Asphalt.56Preparation and conditioning of test material.57Preparation of asphalt for test blocks.58Preparation of the test blocks.59Storage.510Report for asphalt blocks preparing.6SIST EN 13880-11:2004



EN 13880-11:2003 (E)3ForewordThis document (EN 13880-11:2003) has been prepared by Technical Committee CEN/TC 227 "Road materials",the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by pu
...