EN 13880-7:2003
(Main)Hot applied joint sealants - Part 7: Function testing of joint sealants
Hot applied joint sealants - Part 7: Function testing of joint sealants
This European Standard describes a function test for joint sealants intended for use in construction joints as well as in spontaneously formed cracks in road and airfield pavements.
Heiß verarbeitbare Fugenmassen - Teil 7: Funktionsprüfung von Fugenmassen
Diese Europäische Norm beschreibt eine Funktionsprüfung für Fugenmassen, die in Fugen und als Rissfüllun-gen in Verkehrsflächen anzuwenden sind.
Produits de scellement de joints appliqués à chaud - Partie 7: Test fonctionnel sur scellement de joints
Toplo nanosljive tesnilne mase za stike – 7. del: Preskušanje funkcionalnosti tesnilne mase za stike
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplo nanosljive tesnilne mase za stike – 7. del: Preskušanje funkcionalnosti tesnilne mase za stikeHeiß verarbeitbare Fugenmassen - Teil 7: Funktionsprüfung von FugenmassenProduits de scellement de joints appliqués a chaud - Partie 7: Test fonctionnel sur scellement de jointsHot applied joint sealants - Part 7: Function testing of joint sealants93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-7:2003SIST EN 13880-7:2004en01-junij-2004SIST EN 13880-7:2004SLOVENSKI
STANDARD
SIST EN 13880-7:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-7August 2003ICS 93.080.20English versionHot applied joint sealants - Part 7: Function testing of jointsealantsProduits de scellement de joints appliqués à chaud - Partie7: Test fonctionnel sur scellement de jointsHeiß verarbeitbare Fugenmassen - Teil 7:Funktionsprüfung von FugenmassenThis European Standard was approved by CEN on 2 May 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-7:2003 ESIST EN 13880-7:2004
EN 13880-7:2003 (E)2ContentspageForeword.31Scope.32Normative references.43Terms and definitions.44Principle.45Apparatus.46Preparation and conditioning of test specimens.57Procedure.77.1Conditioning.77.2Proceeding after conditioning.87.3Test procedure.88Calculation and expression of results.98.1Maximum tension.98.2Failures.109Test report.10SIST EN 13880-7:2004
EN 13880-7:2003 (E)3ForewordThis document EN 13880-7:2003 has been prepared by Technical Committee CEN/TC 227 “Road materials”, thesecretariat of which is held by DIN.This European Standard shall be given the status of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.