EN 1010-1:2004/FprA1

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Druck- und Papierverarbeitungsmaschinen - Teil 1: Gemeinsame Anforderungen

Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines d'impression et de transformation du papier - Partie 1: Prescriptions communes

Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo tiskarskih strojev in strojev za obdelavo papirja - 1. del: Splošne zahteve

General Information

• Status: Not Published
• ICS: 37.100.10 - Reproduction equipment
• ICS: 85.100 - Equipment for the paper industry
• Technical Committee: CEN/TC 198 - Printing and paper machinery - Safety
• Drafting Committee: CEN/TC 198/WG 1 - Printing and paper converting machines - Drafting of safety standards
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 29-Sep-2010
• Due Date: 11-Oct-2010
• Completion Date: 29-Sep-2010
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Mandate: M/BC/CEN/92/46 - Standardization mandate assigned to CEN/CENELEC concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Ref Project: SIST EN 1010-1:2005/kFprA1:2010 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

Relations

• Merged Into: EN 1010-1:2004+A1:2010 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
• Effective Date: 18-Jan-2023
• Amends: EN 1010-1:2004 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1010-1:2005/kFprA1:2010
01-julij-2010
9DUQRVWVWURMHY9DUQRVWQH]DKWHYH]DQDþUWRYDQMHLQNRQVWUXNFLMRWLVNDUVNLK
VWURMHYLQVWURMHY]DREGHODYRSDSLUMDGHO6SORãQH]DKWHYH
Safety of machinery - Safety requirements for the design and construction of printing and
paper converting machines - Part 1: Common requirements
Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von
Druck- und Papierverarbeitungsmaschinen - Teil 1: Gemeinsame Anforderungen
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction
de machines d'impression et de transformation du papier - Partie 1: Prescriptions
communes
Ta slovenski standard je istoveten z: EN 1010-1:2004/FprA1
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
85.100 Oprema za papirno industrijo Equipment for the paper
industry
SIST EN 1010-1:2005/kFprA1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1010-1:2005/kFprA1:2010

---------------------- Page: 2 ----------------------

SIST EN 1010-1:2005/kFprA1:2010


EUROPEAN STANDARD
FINAL DRAFT
EN 1010-1:2004
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
April 2010
ICS 37.100.10; 85.100
English Version
Safety of machinery - Safety requirements for the design and
construction of printing and paper converting machines - Part 1:
Common requirements
Sécurité des machines - Prescriptions de sécurité pour la Sicherheit von Maschinen - Sicherheitsanforderungen an
conception et la construction de machines d'impression et Konstruktion und Bau von Druck- und
de transformation du papier - Partie 1: Prescriptions Papierverarbeitungsmaschinen - Teil 1: Gemeinsame
communes Anforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 198.

This draft amendment A1, if approved, will modify the European Standard EN 1010-1:2004. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1010-1:2004/FprA1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1010-1:2005/kFprA1:2010
EN 1010-1:2004/FprA1:2010 (E)
Foreword
This document (EN 1010-1:2004/FprA1:2010) has been prepared by Technical Committee CEN/TC 198
“Printing and paper machinery - Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
2

---------------------- Page: 4 ----------------------

SIST EN 1010-1:2005/kFprA1:2010
EN 1010-1:2004/FprA1:2010 (E)
1 Modification to the Foreword
Add to the Foreword before the last paragraph:
"This part of the standard defines the common safety requirements for all kinds of printing and paper
converting machines and related common devices and is intended to be used in conjunction with another
relevant part of the EN 1010 series. The specific requirements specified in Part 2 and following parts of
EN 1010 supplement or amend the requirements of Part 1 and take precedence over the respective
requirements in EN 1010-1.
NOTE In addition, where a machine is not covered by a specific part of this standard, Part 1 of EN 1010 may be used
in conjunction with a risk assessment to e
...