EN ISO 4528:2015
(Main)Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2015)
Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2015)
ISO 4528:2015 is a guide to the selection of test methods for evaluating the performance of vitreous and porcelain enamelled finishes in different applications. It references the test methods available for measuring the properties of these finishes and correlates these properties to the requirements of specific enamelled articles.
It is limited for the most part to test methods that are described in International Standards or European Standards and does not provide acceptance criteria or performance limits for the properties.
ISO 4528:2015 applies to all enamelled articles irrespective of their basis metals.
Emails und Emaillierungen - Leitlinie zur Auswahl von Prüfverfahren für emaillierte Flächen von Erzeugnissen (ISO 4528:2015)
Finitions en émail vitrifié - Guide pour le choix des méthodes d'essai applicables aux surfaces émaillées de pièces (ISO 4528:2015)
L'ISO 4528:2015 constitue un guide pour le choix des méthodes d'essai permettant l'évaluation des performances de finitions en émail vitrifié destinées à diverses applications. Elle fournit la référence des méthodes d'essai existantes permettant de mesurer les propriétés de ces finitions, et établit la relation entre ces propriétés et les exigences propres à certaines pièces émaillées particulières.
Elle se limite dans sa plus grande partie aux méthodes d'essai qui sont documentées dans des Normes internationales ou dans des Normes européennes. Néanmoins, elle ne fournit ni les critères d'approbation ni les limites de performance pour lesdites propriétés.
L'ISO 4528:2015 est applicable à toutes les pièces émaillées quel que soit leur métal de base.
Steklasti in porcelanski zaključni emajli - Vodilo za izbor preskusnih metod za emajlirane površine izdelkov (ISO 4528:2015)
Ta mednarodni standard je vodilo za izbor preskusnih metod za ocenjevanje površine steklastih in porcelanskih zaključnih emajlov pri različnih namenih uporabe. Sklicuje se na preskusne metode, ki so na voljo za merjenje lastnosti teh emajlov, ter te lastnosti povezuje z zahtevami za določene emajlirane izdelke.
V večjem delu je omejen na preskusne metode, opisane v mednarodnih standardih ISO/evropskih standardih, in za lastnosti ne podaja meril glede sprejemljivosti ali omejitev kakovosti.
Ta mednarodni standard se uporablja za vse emajlirane izdelke, ne glede na to, katere so njihove osnovne kovine.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4528:2015
01-maj-2015
1DGRPHãþD
SIST EN ISO 4528:2009
6WHNODVWLLQSRUFHODQVNL]DNOMXþQLHPDMOL9RGLOR]DL]ERUSUHVNXVQLKPHWRG]D
HPDMOLUDQHSRYUãLQHL]GHONRY ,62
Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous
and porcelain enamelled areas of articles (ISO 4528:2015)
Emails und Emaillierungen - Leitlinie zur Auswahl von Prüfverfahren für emaillierte
Flächen von Erzeugnissen (ISO 4528:2015)
Finitions en émail vitrifié - Guide pour le choix des méthodes d'essai applicables aux
surfaces émaillées de pièces (ISO 4528:2015)
Ta slovenski standard je istoveten z: EN ISO 4528:2015
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 4528:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4528:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 4528:2015
EUROPEAN STANDARD
EN ISO 4528
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2015
ICS 25.220.50 Supersedes EN ISO 4528:2009
English Version
Vitreous and porcelain enamel finishes - Guide to selection of
test methods for vitreous and porcelain enamelled areas of
articles (ISO 4528:2015)
Finitions en émail vitrifié - Guide pour le choix des Emails und Emaillierungen - Leitlinie zur Auswahl von
méthodes d'essai applicables aux surfaces émaillées de Prüfverfahren für emaillierte Flächen von Erzeugnissen
pièces (ISO 4528:2015) (ISO 4528:2015)
This European Standard was approved by CEN on 3 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4528:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4528:2015
EN ISO 4528:2015 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4528:2015
EN ISO 4528:2015 (E)
Foreword
This document (EN ISO 4528:2015) has been prepared by Technical Committee ISO/TC 107 " Metallic and
other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and other inorganic
coatings” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at
the latest by August 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4528:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4528:2015 has been approved by CEN as EN ISO 4528:2015 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 4528:2015
---------------------- Page: 6 ----------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.