EN 288-1:1992

Specification and qualification of welding procedures for metallic materials - Part 1: General rules for fusion welding

This standard defines general rules for the specification and approval of welding procedures for metallic materials. This standard also refers to several other standards as regards detailed rules for specific applications.   It is assumed that the welding procedure specifications are used in production by competent welders, approved in accordance with the relevant part of EN 287.  (.)1)  This standards applies when approval of the welding procedure is required e.g. by either contract, standards, rules or legal requirements.  The use of a particular method of approval of a welding procedure is often a mandatory requirement of an application standard. In the absence of such a requirement the method of approval shall be agreed between the contracting parties at the enquiry or at the order stage.  1) This paragraph in EN 288-1 :1992 was deleted by Amendment A1 :1997

Anforderung und Anerkennung von Schweißverfahren für metallische Werkstoffe - Teil 1: Allgemeine Regeln für das Schmelzschweißen

Diese Norm legt allgemeine Regeln für die Anforderung und Anerkennung von Schweissverfahren für metallische Werkstoffe fest. Diese Norm nimmt auch Bezug auf verschiedene andere Normen hinsichtlich ins einzelne gehende Regelungen bei besonderen Anwendungen. Es wird vorausgesetzt, dass die Schweissanwendungen in der Fertigung von befähigten Schweissern angewendet werden, die nach dem entsprechenden Teil von prEN 287 anerkannt sind.

Descriptif et qualification d'un mode opératoire de soudage sur les matériaux métalliques - Partie 1: Règles générales; soudage par fusion

La présente norme définit les règles générales pour l'établissement du descriptif et la qualification d'un mode opératoire de soudage. Elle fait référence à d'autres normes pour mettre en oeuvre des règles détaillées concernant des applications spécifiques. On présume que les déscriptifs des modes opératoires de soudage sont utilisés en production par des soudeurs compétents, qualifiés en conformité avec les parties appropriées du EN 287.

Popis in odobritev varilnih postopkov za kovinske materiale - 1. del: Splošna pravila za talilno varjenje

General Information

• Status: Withdrawn
• Publication Date: 25-Feb-1992
• Withdrawal Date: 14-Dec-2003
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 1 - Specification and qualification of welding procedures for metallic materials
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2003
• Completion Date: 15-Dec-2003
• Directive: 87/404/EEC - Simple pressure vessels
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/89/2 - Standardization mandate to CEN concerning supporting standards in the context of pressure vessels
• Ref Project: SIST EN 288-1:1996 - Specification and qualification of welding procedures for metallic materials - Part 1: General rules for fusion welding

Relations

• Amended By: EN 288-1:1992/A1:1997 - Specification and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 15607:2003 - Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
• Effective Date: 22-Dec-2008