EN ISO 12625-9:2015

Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015)

ISO 12625-9:2015 specifies a test method for the determination of the resistance to mechanical penetration (ball burst strength procedure) of tissue paper and tissue products.
Currently, two types of clamping devices are available on the market with two different diameters, one is with 50 mm and one is with 89 mm. ISO 12625-9:2015 applies for a 50 mm clamping device to be able to measure all sample sizes of tissue paper and tissue products and to be consistent with ISO 12625-11.

Tissue-Papier und Tissue-Produkte - Teil 9: Bestimmung der Berstfestigkeit mit einem Durchstoßkörper (ISO 12625-9:2015)

Papier tissue et produits tissue - Partie 9: Détermination de la résistance à l'éclatement, méthode à la balle (ISO 12625-9:2015)

L'ISO 12625-9:2015 spécifie une méthode d'essai pour la détermination de la résistance à la pénétration mécanique (résistance à l'éclatement par la méthode à la balle) du papier tissue et des produits tissue.
Il existe actuellement sur le marché deux types de dispositifs de serrage, disponibles en deux diamètres: 50 mm et 89 mm. L'ISO 12625-9:2015 s'applique aux dispositifs de serrage de 50 mm qui permettent de mesurer des échantillons de papier tissue et de produits tissue de toutes tailles et conformes à l'ISO 12625-11.

Tissue papir in proizvodi iz tissue papirja - 9. del: Ugotavljanje razpočne trdnosti s kroglico (ISO 12625-9:2015)

General Information

• Status: Published
• Publication Date: 17-Feb-2015
• Withdrawal Date: 30-Aug-2015
• ICS: 85.060 - Paper and board
• ICS: 85.080.20 - Tissue paper
• Technical Committee: CEN/TC 172 - Pulp, paper and board
• Drafting Committee: CEN/TC 172/WG 8 - Test methods for soft tissue papers
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-Feb-2015
• Due Date: 04-May-2016
• Completion Date: 18-Feb-2015
• Ref Project: SIST EN ISO 12625-9:2015 - Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015)

Relations

• Replaces: EN ISO 12625-9:2005 - Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2005)
• Effective Date: 05-Nov-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12625-9:2015
01-junij-2015
1DGRPHãþD
SIST EN ISO 12625-9:2005
7LVVXHSDSLULQSURL]YRGLL]WLVVXHSDSLUMDGHO8JRWDYOMDQMHUD]SRþQHWUGQRVWLV
NURJOLFR,62
Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO
12625-9:2015)
Tissue-Papier und Tissue-Produkte - Teil 9: Bestimmung der Berstfestigkeit mit einem
Durchstoßkörper (ISO 12625-9:2015)
Papier tissue et produits tissues - Partie 9: Détermination de la résistance à l'éclatement,
méthode à la balle (ISO 12625-9:2015)
Ta slovenski standard je istoveten z: EN ISO 12625-9:2015
ICS:
85.080.20 Tissue papir Tissue paper
SIST EN ISO 12625-9:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12625-9:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 12625-9:2015

EUROPEAN STANDARD
EN ISO 12625-9

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2015
ICS 85.060 Supersedes EN ISO 12625-9:2005
English Version
Tissue paper and tissue products - Part 9: Determination of ball
burst strength (ISO 12625-9:2015)
Papier tissue et produits tissue - Partie 9: Détermination de Tissue-Papier und Tissue-Produkte - Teil 9: Bestimmung
la résistance à l'éclatement, méthode à la balle (ISO 12625- der Berstfestigkeit mit einem Durchstoßkörper (ISO 12625-
9:2015) 9:2015)
This European Standard was approved by CEN on 3 January 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12625-9:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12625-9:2015
EN ISO 12625-9:2015 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12625-9:2015
EN ISO 12625-9:2015 (E)
Foreword
This document (EN ISO 12625-9:2015) has been prepared by Technical Committee ISO/TC 6 “Paper, board
and pulps” in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at
the latest by August 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12625-9:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 12625-9:2015 has been approved by CEN as EN ISO 12625-9:2015 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 12625-9:2015

---------------------- Page: 6 ----------------------

SIST EN ISO 12625-9:2015
INTERNATIONAL ISO
STANDARD 12625-9
Second edition
2015-02-15
T
...