Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2005)

ISO 12625-9:2005 specifies a test method for the determination of the resistance to mechanical penetration (ball burst strength procedure) of tissue paper and tissue products.

Tissue-Papier und Tissue-Produkte - Teil 9: Bestimmung der Berstfestigkeit mit einem Durchstoßkörper (ISO 12625-9:2005)

Dieser Teil der ISO 12625 legt ein Prüfverfahren zur Bestimmung des Widerstandes gegen mechanisches Durchdringen (Berstfestigkeit) von Tissue-Papier und Tissue-Produkten fest.
Darüber hinaus wird ausdrücklich darauf hingewiesen, dass zur Erkennung von Unreinheiten und Verunreinigungen in Tissue-Papier und Tissue-Produkten folgende Internationale Norm angewendet werden sollte:
¾   ISO 15755 "Papier und Pappe - Schätzung von Verunreinigungen"
Für die Bestimmung des Feuchtegehaltes in Tissue-Papier und Tissue-Produkten sollte ISO 287 angewendet werden.

Papier tissu et produits en tissu - Partie 9: Détermination de la résistance à l'éclatement, méthode à la balle (ISO 12625-9:2005)

L'ISO 12625-9:2005 spécifie une méthode d'essai pour la détermination de la résistance à la pénétration mécanique (résistance à l'éclatement, méthode à la balle) du papier tissue et des produits tissues.

Tissue papir in proizvodi iz tissue papirja - 9. del: Ugotavljanje razpočne trdnosti s kroglico (ISO 12625-9:2005)

General Information

Status
Withdrawn
Publication Date
30-Apr-2005
Withdrawal Date
17-Feb-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
18-Feb-2015

RELATIONS

Buy Standard

Standard
EN ISO 12625-9:2005
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 12625-9:2005
01-julij-2005

7LVVXHSDSLULQSURL]YRGLL]WLVVXHSDSLUMDGHO8JRWDYOMDQMHUD]SRþQHWUGQRVWLV

NURJOLFR ,62

Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO

12625-9:2005)

Tissue-Papier und Tissue-Produkte - Teil 9: Bestimmung der Berstfestigkeit mit einem

Durchstoßkörper (ISO 12625-9:2005)

Papier tissu et produits en tissu - Partie 9: Détermination de la résistance a l'éclatement,

méthode a la balle (ISO 12625-9:2005)
Ta slovenski standard je istoveten z: EN ISO 12625-9:2005
ICS:
85.080.20 Tissue papir Tissue paper
SIST EN ISO 12625-9:2005 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12625-9:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 12625-9:2005
EUROPEAN STANDARD
EN ISO 12625-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2005
ICS 85.020; 85.060
English version
Tissue paper and tissue products - Part 9: Determination of ball
burst strength (ISO 12625-9:2005)

Papier tissu et produits en tissu - Partie 9: Détermination Tissue-Papier und Tissue-Produkte - Teil 9:

de la résistance à l'éclatement, méthode à la balle (ISO Berstfestigkeitsprüfung mit einem Durchstoßkörper (ISO

12625-9:2005) 12625-9:2005)
This European Standard was approved by CEN on 23 March 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12625-9:2005: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12625-9:2005
EN ISO 12625-9:2005 (E)
Foreword

This document (EN ISO 12625-9:2005) has been prepared by Technical Committee CEN/TC 172 "Pulp,

paper and board", the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC

6 "Paper, board and pulps”.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by November 2005, and conflicting national standards shall be

withdrawn at the latest by November 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland

and United Kingdom.
---------------------- Page: 4 ----------------------
SIST EN ISO 12625-9:2005
INTERNATIONAL ISO
STANDARD 12625-9
First edition
2005-05-01
Tissue paper and tissue products
Part 9:
Determination of ball burst strength
Papier tissu et produits en tissu
Partie 9: Détermination de la résistance à l'éclatement, méthode à la
balle
Reference number
ISO 12625-9:2005(E)
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 12625-9:2005
ISO 12625-9:2005(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2005

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 12625-9:2005
ISO 12625-9:2005(E)
Contents Page

Foreword............................................................................................................................................................ iv

Introduction ........................................................................................................................................................ v

1 Scope...................................................................................................................................................... 1

2 Normative references ........................................................................................................................... 1

3 Terms and definitions........................................................................................................................... 1

4 Principle ................................................................................................................................................. 2

5 Apparatus............................................................................................................................................... 2

6 Conditioning .......................................................................................................................................... 4

7 Preparation of test pieces .................................................................................................................... 4

8 Procedure............................................................................................................................................... 4

9 Calculation............................................................................................................................................. 5

10 Test report.............................................................................................................................................. 5

11 Precision ................................................................................................................................................ 5

Bibliography ....................................................................................................................................................... 7

© ISO 2005 – All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 12625-9:2005
ISO 12625-9:2005(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 12625-9 was prepared by the European Committee for Standardization (CEN) Technical Committee

CEN/TC 172, Pulp, paper and board, in collaboration with Technical Committee ISO/TC 6, Paper, board and

pulps, Subcommittee SC 2, Test methods and quality specifications for paper and board, in accordance with

the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

ISO 12625 consists of the following parts, under the general title tissue paper and tissue product:

 Part 1: General guidance on terms

 Part 3: Determination of thickness, bulking thickness and apparent bulk density

 Part 4: Determination of tensile strength, stretch at break and tensile energy absorption

 Part 5: Determination of wet tensile strength
 Part 6: Determination of grammage
 Part 7: Determination of optical properties

 Part 8: Water absorption time and water absorption capacity, basket immersion test method

 Part 9: Determination of ball burst strength
iv © ISO 2005 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 12625-9:2005
ISO 12625-9:2005(E)
Introduction

This part of ISO 12625 is applicable to tissue paper and tissue products. In principle, application to other

paper types is possible, but not covered by this part of ISO 12625.
© ISO 2005 – All rights reserved v
---------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.