EN 16090:2011

Copper and copper alloys - Estimation of average grain size by ultrasound

This European Standard specifies a method for the estimation of the average grain size of copper and copper alloy products by ultrasound. This standard can be applied for seamless round tubes as well as for flat products.
This method can be used in place of test methods according to EN ISO 2624, mentioned in the relevant product standards. As reference method and in case of doubt the intercept procedure or planimetric procedure has to be used.

Kupfer und Kupferlegierungen - Bestimmung der mittleren Korngröße durch Ultraschall

Diese Europäische Norm legt ein Verfahren für die Bestimmung der mittleren Korngröße von Produkten aus Kupfer und Kupferlegierungen mit Ultraschall fest. Diese Norm ist auf nahtlose Rundrohre und auch auf Flachprodukte anwendbar. Das Verfahren kann anstelle der Prüfverfahren nach EN ISO 2624 angewendet werden, die in den jeweiligen Produktnormen genannt werden. Als Referenzverfahren und im Zweifelsfall ist das Linienschnittverfahren oder das planimetrische Verfahren anzuwenden.

Cuivre et alliages de cuivre - Estimation de la taille moyenne de grain par ultrasons

La présente Norme européenne prescrit une méthode d’estimation de la taille moyenne de grain des produits
en cuivre et alliages de cuivre par ultrasons. La présente norme est applicable aux tubes ronds sans soudure
ainsi qu’aux produits plats.
La présente méthode peut remplacer les méthodes d’essai selon l’EN ISO 2624, mentionnées dans les
normes de produit correspondantes. La méthode d’interception ou la méthode planimétrique doivent être
utilisées comme méthodes de référence ou en cas de doute.

Baker in bakrove zlitine - Ocena povprečne velikosti zrn z ultrazvokom

Ta evropski standard določa metodo za oceno povprečne velikosti zrn izdelkov iz bakra in bakrovih zlitin z ultrazvokom. Ta standard je mogoče uporabiti za nevarjene okrogle cevi in ploščate izdelke. To metodo je mogoče uporabljati namesto preskusnih metod iz standarda EN ISO 2624, ki so navedene v zadevnih standardih za izdelke. Kot referenčno metodo in v primeru dvoma je treba uporabiti prestrezni postopek ali planimetrični postopek.

General Information

• Status: Withdrawn
• Publication Date: 06-Dec-2011
• Withdrawal Date: 19-Nov-2019
• ICS: 77.120.30 - Copper and copper alloys
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 3 - Copper tubes (installation and industrial)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Nov-2019
• Ref Project: SIST EN 16090:2012 - Copper and copper alloys - Estimation of average grain size by ultrasound

Relations

• Replaced By: EN 16090:2019 - Copper and copper alloys - Estimation of average grain size by ultrasound
• Effective Date: 27-Nov-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YRNRPKupfer und Kupferlegierungen - Bestimmung der mittleren Korngröße durch UltraschallCuivre et alliages de cuivre - Estimation de la taille moyenne de grain par ultrasonsCopper and copper alloys - Estimation of average grain size by ultrasound77.120.30Baker in bakrove zlitineCopper and copper alloysICS:Ta slovenski standard je istoveten z:EN 16090:2011SIST EN 16090:2012en,fr,de01-februar-2012SIST EN 16090:2012SLOVENSKI
STANDARD



SIST EN 16090:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16090
December 2011 ICS 77.120.30 English Version
Copper and copper alloys - Estimation of average grain size by ultrasound
Cuivre et alliages de cuivre - Estimation de la taille moyenne de grain par ultrasons
Kupfer und Kupferlegierungen - Bestimmung der mittleren Korngröße durch Ultraschall This European Standard was approved by CEN on 5 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16090:2011: ESIST EN 16090:2012



EN 16090:2011 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 General requirements .54.1 Personnel qualification .54.2 Condition of products to be tested .64.3 Test equipment .64.4 Procedure .75 Instrument adjustment .86 Reference samples and calibration .87 Acceptance criteria .8Bibliography .9 Figures Figure 1 — Simplified representation of ultrasonic technique for grain size estimation .7 Figure 2 — Simplified illustration of backscattered signals .7
SIST EN 16090:2012



EN 16090:2011 (E) 3 Foreword This document (EN 16090:2011) has been prepared by Technical Committee CEN/TC 133 “Copper and copper alloys”, the secretariat of which is held by DIN. This European Standard shall be given the status
...