EN ISO 17660-1:2006

Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006)

ISO 17660-1:2006 is applicable to the welding of weldable reinforcing steel and stainless reinforcing steel of load-bearing joints, in workshops or on site. It specifies requirements for materials, design and execution of welded joints, welding personnel, quality requirements, examination and testing.
ISO 17660-1:2006 also covers welded joints between reinforcing steel bars and other steel components, such as connection devices and insert anchors, including prefabricated assemblies. Non load-bearing joints are covered by ISO 17660-2.
ISO 17660-1:2006 is not applicable to factory production of welding fabric and lattice girders using multiple spot welding machines or multiple projection welding machines.
The requirements of ISO 17660-1:2006 are only applicable to static loaded structures.

Schweißen - Schweißen von Betonstahl - Teil 1: Tragende Schweißverbindungen (ISO 17660-1:2006)

Dieser Teil von ISO 17660 gilt für das Schweißen von schweißgeeigneten Betonstählen und nichtrostenden Betonstählen für tragende Schweißverbindungen in Betrieben und auf der Baustelle. Er legt Anforderungen für Werkstoffe, Gestaltung und Ausführung von Schweißverbindungen, Schweißpersonal, Qualitätsanforderungen, Untersuchung und Prüfung fest.
Dieser Teil von ISO 17660 enthält auch Verbindungen zwischen Betonstahlstäben und anderen Stahlteilen, wie Verbindungseinheiten, Verankerungen, einschließlich vorgefertigter Einbauteile. Nichttragende Schwei߬verbindungen werden durch ISO 17660-2 erfasst.
Dieser Teil von ISO 17660 gilt nicht für die fabrikmäßige Herstellung von Betonstahlmatten und Gitterträgern auf Mehrfachpunktschweißmaschinen oder auf Mehrfachbuckelschweißmaschinen.
Die Anforderungen dieses Teils von ISO 17660 gelten nur für ruhend beanspruchte Bauteile.
ANMERKUNG   Für dynamisch beanspruchte Bauteile wird empfohlen, in Abhängigkeit der Stoßart und des Schwei߬prozesses, eine merkliche Verminderung der dynamischen Festigkeit des Betonstahls zu berücksichtigen.

Soudage - Soudage des aciers d'armatures - Partie 1: Assemblages transmettant des efforts (ISO 17660-1:2006)

L'ISO 17660-1:2006 est applicable au soudage, en atelier et sur chantier, des aciers soudables pour armatures et des aciers inoxydables pour armatures des assemblages transmettant des efforts. Elle spécifie les exigences relatives aux matériaux, à la conception et à l'exécution des assemblages soudés, au personnel de soudage, aux exigences de qualité, aux examens, contrôles et essais.
L'ISO 17660-1:2006 couvre également les assemblages soudés entre les barres en acier pour armatures et d'autres éléments en acier, tels que les raccords et les ancrages encastrés, y compris les assemblages préfabriqués. Les assemblages non transmettants sont couverts par l'ISO 17660-2.
L'ISO 17660-1:2006 n'est pas applicable à la production en usine pour souder les armatures en treillis soudés et les poutres en treillis sur machines multipoints ou sur machines de soudage par bossages multiples.
Les exigences de l'ISO 17660-1:2006 ne sont applicables qu'aux structures soumises à des charges statiques.

Varjenje - Varjenje betonskega jekla - 1. del: Obremenjeni zvarni spoji (ISO 17660-1:2006)

General Information

• Status: Published
• Publication Date: 31-Aug-2006
• Withdrawal Date: 30-Mar-2007
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 16 - Welding of reinfocing steels
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Sep-2006
• Due Date: 15-Jul-2007
• Completion Date: 01-Sep-2006
• Ref Project: SIST EN ISO 17660-1:2007 - Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006)

Relations

• Splited From: prEN ISO 17660 - Welding - Welding of reinforcing steel (ISO/DIS 17660:2003)
• Effective Date: 08-Mar-2023
• Revised: prEN ISO 17660-1 - Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO/DIS 17660-1:2017)
• Effective Date: 16-Nov-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17660-1:2007
01-marec-2007
Varjenje - Varjenje betonskega jekla - 1. del: Obremenjeni zvarni spoji (ISO 17660-
1:2006)
Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-
1:2006)
Schweißen - Schweißen von Betonstahl - Teil 1: Tragende Schweißverbindungen (ISO
17660-1:2006)
Soudage - Soudage des aciers d'armatures - Partie 1: Assemblages transmettant des
efforts (ISO 17660-1:2006)
Ta slovenski standard je istoveten z: EN ISO 17660-1:2006
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 17660-1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 17660-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2006
ICS 25.160.10

English Version
Welding - Welding of reinforcing steel - Part 1: Load-bearing
welded joints (ISO 17660-1:2006)
Soudage - Soudage des aciers d'armatures - Partie 1: Schweißen - Schweißen von Betonstahl - Teil 1: Tragende
Assemblages transmettant des efforts (ISO 17660-1:2006) Schweißverbindungen (ISO 17660-1:2006)
This European Standard was approved by CEN on 2 August 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17660-1:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 17660-1:2006 (E)





Foreword


This document (EN ISO 17660-1:2006) has been prepared by Technical Committee CEN/TC
121 "Welding", the secretariat of which is held by DIN, in collaboration with Technical Committee
ISO/TC 44 "Welding and allied processes".

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2007, and conflicting national
standards shall be withdrawn at the latest by March 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 17660-1
First edition
2006-09-01


Welding — Welding of reinforcing steel —
Part 1:
Load-bearing welded joints
Soudage — Soudage des aciers d'armatures —
Partie 1: Assemblages transmettant des efforts




Reference number
ISO 17660-1:2006(E)
©
ISO 2006

---------------------- Page: 4 ----------------------

ISO 17660-1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication
...