EN 13481-2:2002
(Main)Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
This European Standard is applicable to fastening systems for use on concrete sleepers in ballasted track as follows:
¾ main lines having a radius of curvature greater than 150 m and subject to a maximum design axle load of 260 kN;
¾ light rail systems having a radius of curvature greater than 80 m and subject to a maximum design axle load of 130 kN.
The requirements apply to:
¾ direct fastening systems and systems which incorporate a baseplate;
¾ fastening systems for the rail sections in prEN 13674-1 and prEN 13674-4.
This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints.
This standard is for type approval of a complete fastening assembly only.
Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 2: Befestigungssysteme für Betonschwellen
Diese Europäische Norm gilt für folgende Schienenbefestigungssysteme auf Betonschwellen im Schotteroberbau:
Vollbahnstrecken mit einem Gleisbogenhalbmesser von > 150 m und einer maximalen Auslegungsachslast von 260 kN;
Stadtbahnstrecken mit einem Gleisbogenhalbmesser von > 80 m und einer maximalen Auslegungsachslast von 130 kN.
Diese Anforderungen gelten für:
direkte Schienenbefestigungssysteme und Systeme, die Rippenplatten beinhalten;
Befestigungssysteme für Schienenquerschnitte nach prEN 13674-1 und prEN 13674-4.
Diese Norm gilt nicht für Befestigungssysteme für andere Schienenabschnitte, starre Befestigungssysteme oder spezielle Befestigungssysteme für Schienenstöße.
Diese Norm gilt ausschließlich für die Typzulassungprüfung für ein komplettes Schienenbefestigungssystem
Applications ferroviaires - Voie - Prescriptions de performance pour les systèmes de fixation - Partie 2: Systèmes de fixation des traverses en béton
La présente norme européenne s'applique aux systèmes de fixation destinés à être utilisés sur des traverses en béton comme suite:
¾ Lignes principales ayant un rayon de courbure supérieure à 150 m et soumises à l'application d'une charge à l'essieu nominale maximale de 260 kN;
¾ Systèmes pour véhicules légers ayant un rayon de courbure supérieure à 80 m et soumis à l'application d'une charge à l'essieu nominale maximale de 130 kN.
Les prescriptions s'appliquent
¾ aux systèmes de fixation directs et aux systèmes avec selle;
¾ aux systèmes de fixations pour les sections de rails indiqués dans les prEN 13674-1 et prEN 13674-4.
Cette norme ne s'applique pas aux systèmes de fixation relatifs aux autres profils de rail, aux systèmes de fixation rigide, ou aux systèmes de fixation spéciaux utilisés aux joints éclissés.
La présente norme s'applique uniquement à la qualification d'un système d'attache complet.
Železniške naprave – Zgornji ustroj – Zahteve za izdelavo pritrdilnih sistemov – 2. del: Pritrdilni sistemi za betonske prage
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepersŽelezniške naprave – Zgornji ustroj – Zahteve za izdelavo pritrdilnih sistemov – 2. del: Pritrdilni sistemi za betonske prageApplications ferroviaires - Voie - Prescriptions de performance pour les systemes de fixation - Partie 2: Systemes de fixation des traverses en bétonBahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 2: Befestigungssysteme für BetonschwellenTa slovenski standard je istoveten z:EN 13481-2:2002SIST EN 13481-2:2004en93.100ICS:SLOVENSKI
STANDARDSIST EN 13481-2:200401-marec-2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13481-2June 2002ICS 93.100English versionRailway applications - Track - Performance requirements forfastening systems - Part 2: Fastening systems for concretesleepersApplications ferroviaires - Voie - Prescriptions deperformance pour les systèmes de fixation - Partie 2:Systèmes de fixation des traverses en bétonBahnanwendungen - Oberbau - Leistungsanforderungen fürSchienenbefestigungssysteme - Teil 2:Befestigungssysteme für BetonschwellenThis European Standard was approved by CEN on 6 March 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13481-2:2002 E
Vertical load test for cast-in fastening components.11A.1Test procedure.11A.2Test report.12Annex B (normative)
Determination of dynamic stiffness of rail pads.13B.1General.13B.2Terms and definitions.13B.3Symbols.13B.4Principle.13B.5Apparatus.13B.5.1Controlled temperature test area.13B.5.2Steel plate.13B.5.3Abrasive cloth.13B.5.4Actuator.14B.5.5Displacement measuring instruments.14B.5.6Force measuring instruments.14B.5.7Recording equipment.14B.6Procedure.14B.7Test report.14Annex ZA
(informative)
Clauses of this European Standard addressing essential requirements orother provisions of EU Directives.15Bibliography.17
1) Railway Equipment2) Standardization in the field of Railway Equipment on the Interoperability of the Trans-European High-Speed Rail System
fastening systems - Part 7: Determination ofclamping force.EN 13146-8, Railway applications ¾ Track ¾ Test methods for fastening systems - Part 8: In-service testing.prEN 13230-1, Railway applications ¾ Track ¾ Concrete sleepers and bearers - Part 1: General requirements.EN 13481-1, Railway applications ¾ Track ¾ Performance requirements for fastening systems ¾ Part 1:Definitions.prEN 13674-1, Railway applications ¾ Track ¾ Rail ¾ Part 1: Flat bottom symmetrical railway rails 46 kg/m andabove.prEN 13674-43), Railway applications ¾ Track ¾ Rail ¾ Part 4: Flat bottom symmetrical railway rails from 27 to46 kg/m.3 Terms and definitionsFor the purposes of this European Standard the terms and definitions in EN 13481-1 apply.4 SymbolsLlateral component of force transmitted by the wheel to the rail head as shown in Figure 1, in kN;PLcomponent of load parallel to the base of the sleeper, in kN;PV component of load normal to the base of the sleeper, in kN;Vvertical component of force transmitted by the wheel to the rail head as shown in Figure 1, in kN;Xdistance between the line of application of L
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.