iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 6042:2000

(Main)

Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998)

Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998)

Migrated from Progress Sheet (TC Comment) (2000-07-10): WARNING : selected as 'type C' for the experiment in one language ++ (cf CA 7/1997)  (as per Resolution BT 74/1997)

Schiffe und Meerestechnik - Wetterdichte einflügelige Türen aus Stahl (ISO 6042:1998)

Navires et technologie maritime - Portes en acier à un seul battant, étanches aux intempéries (ISO 6042:1998)

Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998)

General Information

Status
Published
Publication Date
18-Apr-2000
Withdrawal Date
30-Oct-2000
ICS
47.020.10 - Hulls and their structure elements
Technical Committee
CEN/TC 300 - Sea-going vessels and marine technology
Drafting Committee
CEN/TC 300 - Sea-going vessels and marine technology
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Apr-2000
Completion Date
19-Apr-2000
Ref Project
SIST EN ISO 6042:2000 - Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998)

Buy Standard

EN ISO 6042:2000EN ISO 6042:2000
PreviousNext
Standard
EN ISO 6042:2000
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6042:2000
01-december-2000
Ships and marine technology - Weathertight single-leaf steel doors (ISO
6042:1998)
Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998)
Schiffe und Meerestechnik - Wetterdichte einflügelige Türen aus Stahl (ISO 6042:1998)
Navires et technologie maritime - Portes en acier a un seul battant, étanches aux
intempéries (ISO 6042:1998)
Ta slovenski standard je istoveten z: EN ISO 6042:2000
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
SIST EN ISO 6042:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6042:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 6042:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 6042:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 6042:2000
INTERNATIONAL ISO
STANDARD 6042
Second edition
1998-08-15
Ships and marine technology —
Weathertight single-leaf steel doors
Navires et technologie maritime — Portes en acier à un seul battant,
étanches aux intempéries
A
Reference number
ISO 6042:1998(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 6042:2000
ISO 6042:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75% of the member bodies casting a vote.
International Standard ISO 6042 was prepared by Technical Committee ISO/TC 8, Ships and marine technology,
Subcommittee SC 8, Structures.
This second edition cancels and replaces the first edition (ISO 6042:1980), of which it constitutes a technical revision.
Amendments
The following amendments have been made to the first edition (1980-11-01).
a) The opening direction has been defined.
b) The door type FBR (corner radius 100 mm) has been added.
c) The nominal sizes of doors have been related to position 1 or 2 according to LLC66.
d) Doors with eight clips have been dropped.
e) Doors with four clips have been added.
f) The inclined and vertical position of the door-seal retaining bar has been admitted.
g) The tolerances for L and B have been changed.
h) The distance between the hinge's pivot and the door frame has been changed from 55 mm to 60 mm.
i) A statement, that the door seal may also be constructed as hollow sections, has been added.
2
j) The minimum tensile strength of the steel for door plates, frames, hinges, etc. has been changed to 340 N/mm .
k) The designation has been added.
l) The standard has been editorially revised.
Annex A of this International Standard is for information only.
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 6042:2000
©
INTERNATIONAL STANDARD  ISO ISO 6042:1998(E)
Ships and marine technology — Weathertight single-leaf
steel doors
1 Scope
This International Standard specifies the main dimensions, materials, quality and conditions of manufacture for
weathertight single-leaf steel doors for application on board ships, in order to ensure interchangeability of the steel
doors. The remaining dimensions, welding and other details are left to the manufacturer.
These doors generally conform to the requirements of the International Convention on Load Lines 1966 (LLC66).
The possibility for application of the doors to position 1 and position 2 has to be considered for each situation and,
where necessary, the doors shall be provided with additional stiffening (see also table 1).
Annex A provides the dimensions of openings in bulkheads.
NOTE —  Users of this International Standard should note that while observing the requirements of this standard they should,
at the same time, ensure compliance with such statutory requirements, rules and regulatio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 5778:2000(Main)
Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998)
SIST EN ISO 5778:2000

This International Standard specifies the main dimensions, location and number of fittings, materials and quality of manufacture for small weathertight steel hatches for application on board ships in order to ensure interchangeability of the hatches. The remaining dimensions are left to the manufacturer. The hatches are suitable for loading operations and for giving access to storage compartments and dry cargo holds.
The hatches are not suitable as an access to any kind of tanks and shall not be used as escape hatches.
These hatches generally conform to the requirements of the International Convention on Load Lines 1966 (LLC66). The possibility for application in position 1 and position 2 has to be considered for each situation and, where necessary, the hatch covers shall be provided with additional stiffening.
NOTE — Users of this International Standard should note that while observing the requirements of this standard, they should, at the same time, ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17361:2023(Main)
Inland navigation vessels - Outboard ladders
SIST EN 17361:2023

This document is applicable to outboard ladders for inland navigation vessels. Outboard ladders are used on inland navigation vessels having great side heights to facilitate safe climbing into ship's boats, safe disembarking or safe crossing over onto vessels in the case of significantly different boarding heights.
This document specifies safety requirements on design, dimensions and strength and test conditions for outboard ladders.
Outboard ladders are intended for that range where boarding stairs according to EN 1502 are not sufficient in length. This range starts at a boarding height of approximately at 2,8 m above the light water-line.
Outboard ladders are not intended for use by passengers.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1502:2023(Main)
Inland navigation vessels - Boarding stairs
SIST EN 1502:2023

This document is applicable to boarding stairs for inland navigation vessels. Boarding stairs are used on inland navigation vessels for a safe transition into ship's boats, safe disembarking to the shore or a safe crossing over onto vessels with lower decks.
This document specifies safety requirements on the design, dimensions and strength and test methods for boarding stairs.
Boarding stairs are designed for vessels having a boarding height greater than 1,5 m above the light water-line. They can be used up to a height of around 3,0 m above the light water-line.
Boarding stairs are not intended for use by passengers.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12215-7:2020(Main)
Small craft - Hull construction and scantlings - Part 7: Determination of loads for multihulls and of their local scantlings using ISO 12215-5 (ISO 12215-7:2020)
SIST EN ISO 12215-7:2021

This document defines the dimensions, local design pressures and global loads acting on multihull craft with a hull length (LH) or load line length of up to 24 m (see Note). It considers all parts of the craft that are assumed watertight or weathertight when assessing stability, freeboard and buoyancy in accordance with ISO 12217 (all parts). Scantlings corresponding to the local design pressures are then assessed using ISO 12215-5.
NOTE       The load line length is defined in the OMI "International Load Lines Convention 1966/2005", it can be smaller than LH for craft with overhangs. This length also sets up at 24 m the lower limit of several IMO conventions.
This document is applicable to multihulls built from the same materials as in ISO 12215-5, in intact condition, and of the two following types:
—          recreational craft, including recreational charter vessels;
—          commercial craft and workboats.
It is not applicable to multihull racing craft designed only for professional racing.
This document is applicable to the structures supporting windows, portlights, hatches, deadlights and doors.
For the complete scantlings of the craft, this document is intended to be used in conjunction with ISO 12215-8 for rudders, ISO 12215-9 for appendages of sailing craft and ISO 12215-10 for rig loads and rig attachment in sailing craft. ISO 12215-6 can be used for additional details.
Throughout this document, unless otherwise specified, dimensions are in (m), areas in (m2), masses in (kg), forces in (N), moments in (Nm), Pressures in (kN/m2) (1 kN/m2 = 1 kPa), stresses and elastic modulus in (N/mm2) (1 N/mm2 = 1 MPa).

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17360:2020(Main)
Inland navigation vessels - Stanchions and holders for tiltable and detachable railings
SIST EN 17360:2020

This document is applicable to stanchions and holders of tiltable and detachable railings (railing type CT and CD according to EN 711 in work areas) for inland navigation vessels. These railings are situated in the side deck areas, where a permanently fitted railing can be an obstacle for loading/discharging operations.
The stanchions are designed for use with handrails and intermediate guardrails made of wire ropes.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12215-5:2019(Main)
Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019, Corrected version 2024-03)
SIST EN ISO 12215-5:2019

This document defines the dimensions, design local pressures, mechanical properties and design stresses for the scantlings determination of monohull small craft with a hull length (LH) or a load line length (see NOTE 1) of up to 24 m. It considers all parts of the craft that are assumed to be watertight or weathertight when assessing stability, freeboard and buoyancy in accordance with ISO 12217.
NOTE 1    The load line length is defined in the IMO "International Load Lines Convention 1966/2005", it can be larger than LH for craft with overhangs. This length also sets up at 24 m the lower limit of several IMO conventions.
The main core of this document determines the local design pressures and stresses for monohulls and details the possible scantlings methods derived from these pressures and stresses, both for monohulls and multihulls (see NOTE 2). The assessment process requires, where relevant, the application of Annexes.
This document is applicable to small craft, in intact condition, of the two following types:
—          recreational craft, including recreational charter vessels;
—          small commercial craft and workboats, see Clause 12 and Annex J.
It is not applicable to racing craft designed only for professional racing.
NOTE 2    Local pressures and stresses for multihulls are given in ISO 12215-7.
This document is applicable to the structures supporting windows, portlights, hatches, deadlights, and doors.
For the complete scantlings of the craft, this document is intended to be used with ISO 12215-8 for rudders, ISO 12215-9 for appendages and ISO 12215-10 for rig loads and rig attachments.
This document covers small craft built from the following materials:
—          fibre-reinforced plastics, either in single skin or sandwich construction;
—          aluminium or steel alloys;
—          glued wood or plywood (single skin or sandwich), excluding traditional wood construction;
—          non-reinforced plastics for craft with a hull length less than 6 m (see Annex D).
Throughout this document, unless otherwise specified, dimensions are in (m), areas in (m2), masses in (kg), forces in (N), moments in (N.m), pressures in kN/m2 (1 kN/m2 = 1  kPa), stresses and elastic modulus in N/mm2 (1 N/mm2 = 1 Mpa). Max(a;b;c) means that the required value is the maximum of a, b, and c; and min(d;e;f) means that the required value is the minimum of d, e, and f.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12215-8:2018(Main)
Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009, including Cor 1:2010)
SIST EN ISO 12215-8:2018

ISO 12215-8:2009 gives requirements on the scantlings of rudders fitted to small craft with a length of hull of up to 24 m, measured according to ISO 8666. It applies only to monohulls.
ISO 12215-8:2009 does not give requirements on rudder characteristics required for proper steering capabilities.
ISO 12215-8:2009 only considers pressure loads on the rudder due to craft manoeuvring. Loads on the rudder or its skeg, where fitted, induced by grounding or docking, where relevant, are out of scope and need to be considered separately.
Scantlings derived from ISO 12215-8:2009 are primarily intended to apply to recreational craft including charter craft.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 711:2016(Main)
Inland navigation vessels - Railings for decks and side decks - Requirements, designs and types
SIST EN 711:2016

This European Standard is applicable to railings for decks and in gangways on inland navigation vessels. It lays down design, dimensions, strength and test conditions which have to be observed for safety reasons. The railings provide protection for persons against falling overboard and from one deck to another.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17683:2015(Main)
Ships and marine technology - Ceramic weld backing for marine use (ISO 17683:2014)
SIST EN ISO 17683:2016

ISO 17683:2014 specifies the classification, dimension and appearance, performance, and test methods for ceramic weld backing. It also specifies marking, packaging, and storage.
ISO 17683:2014 is applicable to designing, manufacturing, testing, and accepting ceramic weld backing that are to be used in the double side form with single side weld, such as arc welding, gas welding, vertical gas welding, and submerged arc welding, and the shaping structural steel welding end for carbon steel, stainless steel, aluminium alloy, copper alloy etc.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 790:2001(Main)
Inland navigation vessels - Stairs with inclination angles of 45° to 60° - Requirements, types
SIST EN 790:2002

1 Scope
This European Standard applies to stairs with inclination angles of 45° to 60°, having at least two steps, in working areas of inland navigation vessels.
It does not apply to stairs in passenger areas.
NOTE  Whenever possible, stairs specified in EN 13056 should be preferred.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day