EN ISO 5778:2000
(Main)Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998)
Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998)
This International Standard specifies the main dimensions, location and number of fittings, materials and quality of manufacture for small weathertight steel hatches for application on board ships in order to ensure interchangeability of the hatches. The remaining dimensions are left to the manufacturer. The hatches are suitable for loading operations and for giving access to storage compartments and dry cargo holds.
The hatches are not suitable as an access to any kind of tanks and shall not be used as escape hatches.
These hatches generally conform to the requirements of the International Convention on Load Lines 1966 (LLC66). The possibility for application in position 1 and position 2 has to be considered for each situation and, where necessary, the hatch covers shall be provided with additional stiffening.
NOTE — Users of this International Standard should note that while observing the requirements of this standard, they should, at the same time, ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.
Schiffe und Meerestechnik - Kleine wetterdichte Luken aus Stahl (ISO 5778:1998)
Navires et technologie maritime - Petits panneaux en acier, étanches aux intempéries (ISO 5778:1998)
IEC TR 62681:2022 est disponible sous forme de IEC TR 62681:2022 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998)Schiffe und Meerestechnik - Kleine wetterdichte Luken aus Stahl (ISO 5778:1998)Navires et technologie maritime - Petits panneaux en acier, étanches aux intempéries (ISO 5778:1998)Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998)47.020.10Ladijski trupi in njihovi konstrukcijski elementiHulls and their structure elementsICS:Ta slovenski standard je istoveten z:EN ISO 5778:2000SIST EN ISO 5778:2000en01-december-2000SIST EN ISO 5778:2000SLOVENSKI
STANDARD
AReference numberISO 5778:1998(E)INTERNATIONALSTANDARDISO5778Second edition1998-08-15Ships and marine technology — Smallweathertight steel hatchesNavires et technologie maritime — Petits panneaux en acier, étanches auxintempériesSIST EN ISO 5778:2000
ISO 5778:1998(E)©
ISO 1998All rights reserved. Unless otherwise specified, no part of this publication may be reproducedor utilized in any form or by any means, electronic or mechanical, including photocopying andmicrofilm, without permission in writing from the publisher.International Organization for StandardizationCase postale 56 · CH-1211 Genève 20 · SwitzerlandInternetiso@iso.chPrinted in SwitzerlandiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISOmember bodies). The work of preparing International Standards is normally carried out through ISO technicalcommittees. Each member body interested in a subject for which a technical committee has been established hasthe right to be represented on that committee. International organizations, governmental and non-governmental, inliaison with ISO, also take part in the work. ISO collaborates closely with the International ElectrotechnicalCommission (IEC) on all matters of electrotechnical standardization.Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.International Standard ISO 5778 was prepared by Technical Committee ISO/TC 8, Ships and marine technology,Subcommittee SC 8, Structures.This second edition cancels and replaces the first edition (ISO 5778:1979), of which it constitutes a technical revision.AmendmentsThe following amendments have been made to the first edition (1979-12-15).a) The nominal size 830 × 630 has been added.b) The inclined and vertical position of the hatch-seal retaining bar has been admitted.c) The tolerances for a, b, a1 and b2 have been added in tables 2 and 3.d) The text of 3.4.2 has been supplemented.e) The distance between the hinge's pivot and the coaming has been changed from 55 mm to 60 mm.f) The minimum tensile strength of the steel for coamings, cover plates, hinges, etc. has been changed to340 N/mm2.g) The designation has been added.h) The standard has been editorially revised.SIST EN ISO 5778:2000
INTERNATIONAL STANDARD
© ISOISO 5778:1998(E)1Ships and marine technology — Small weathertight steel hatches1 ScopeThis International Standard specifies the main dimensions, location and number of fittings, materials and quality ofmanufacture for small weathertight steel hatches for application on board ships in order to ensure interchangeability ofthe hatches. The remaining dimensions are left to the manufacturer.The hatches are suitable for loading operations and for giving access to storage compartments and dry cargo holds.The hatches are not suitable as an access to any kind of tanks and shall not be used as escape hatches.These hatches generally conform to the requirements of the International Convention on Load Lines 1966 (LLC66).The possibility for application in position 1 and position 2 has to be considered for each situation and, where necessary,the hatch covers shall be provided with additional stiffening.NOTE —
Users of this International Standard should note that while observing the requirements of this standard, they should,at the same time, ensure compliance with such statutory requirements, rules and regulations as may be applicable to theindividual ship concerned.2 Normative referenceThe following standard contains provisions which, through reference in this text, constitute provisions of thisInternational Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision,and parties to agreements based on this International Standard are encouraged to investigate the possibility ofapplying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers ofcurrently valid International Standards.ISO 262:— 1), ISO general-purpose metric screw threads – Selected sizes for screws, bolts and nuts.__________1)
To be published. (Revision of ISO 262:1973)SIST EN ISO 5778:2000
ISO 5778:1998(E)© ISO23 Main dimensions3.1 Nominal sizeThe nominal size of a hatch is based on the inside dimensions of the upper part of the coaming, as shown in figure 1and table 1.Dimensions in millimetresKey1
Hatch sealFigure 1 — Illustration of nominal sizesTable 1 — Values of nominal sizesDimensions in millimetresNominal sizea × b630 × 630630 × 830830 × 630
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.