iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1463-2:2000

(Main)

Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications

Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications

This European Standard describes a test method for carrying out road trials on retroreflecting road studs for use in both permanent and temporary applications. Specifications are given for test sites and for application patterns and a recommendation is given for the presentation of the results in the form of a test report.

Straßenmarkierungsmaterialien - Retroreflektierende Markierungsknöpfe - Teil 2: Feldprüfungen

Diese Europäische Norm legt die Prüfverfahren bei der Durchführung von Feldprüfungen an retroreflektierenden Markierungsknöpfen fest, die sowohl für dauerhaften als auch für vorübergehenden Einsatz gedacht sind. Es werden die Bedingungen für die Prüffelder, die Art der Anordnung der Prüfmuster festgelegt und es wird eine Empfehlung gegeben, wie die Ergebnisse in einem Prüfbericht zu dokumentieren sind.

Produits de marquage routier - Plots rétrofléchissants - Partie 2: Essai routier

La présente norme européenne décrit un méthode d'essai pour effectuer des essaisroutiers avec des plots rétroréfléchissants destinés à une utilisation dans des applications permanentes et temporaires. Des prescriptions sont données pour les sites d'essai et pour les schémas d'application;une recommandation est égale ment donnée pour la présentation des résultats sous la forme d'un rapport d'essai.

Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications

General Information

Status
Withdrawn
Publication Date
18-Jan-2000
Withdrawal Date
11-May-2021
ICS
93.080.20 - Road construction materials
Technical Committee
CEN/TC 226 - Road equipment
Drafting Committee
CEN/TC 226/WG 2 - Horizontal road signs
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
12-May-2021
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 1463-2:2002 - Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications

Relations

Replaced By
EN 1463-2:2021 - Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications
Effective Date
19-May-2021

Buy Standard

EN 1463-2:2002EN 1463-2:2002
PreviousNext
Standard
EN 1463-2:2002
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Road marking materials - Retroreflecting road studs - Part 2: Road test performance specificationsStraßenmarkierungsmaterialien - Retroreflektierende Markierungsknöpfe - Teil 2: FeldprüfungenProduits de marquage routier - Plots rétrofléchissants - Partie 2: Essai routierRoad marking materials - Retroreflecting road studs - Part 2: Road test performance specifications93.080
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1463-1:2021(Main)
Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
SIST EN 1463-1:2022

This document specifies the product characteristics, laboratory test methods, the way of expressing results and the relevant procedures for assessment and verification of the constancy of performance for retroreflecting road studs, non depressible and depressible by design (designated as Type A and B, respectively) and which reflectors are made of glass, plastic or plastic with abrasion resistance layer (designated as Type 1, 2 and 3, respectively), to be used for permanent road markings, and delineation purposes, in circulation areas.
This document covers retroreflecting road studs (types - 1, 2, 3 - A, B) of white, yellow, amber, red and green colour of their reflectors.
This document does not cover:
-   non-retroreflective road studs;
-   temporary retroreflective road studs.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1463-2:2021(Main)
Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications
SIST EN 1463-2:2021

This document describes the test method for carrying out road trials on retroreflecting road studs. Specifications are given for test sites, for the organization of the tests, and for the presentation of the results in the form of a test report.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1824:2020(Main)
Road marking materials - Road trials
SIST EN 1824:2020

This document specifies the requirements for conducting road trials for road marking intended for use in both permanent and temporary road marking. Details are given for test sites, for the application of road marking materials on the test sites, for the parameters to be measured and the frequency of the measurements and for the presentation of the results in the form of a test report.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1871:2020(Main)
Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
SIST EN 1871:2020

This document covers testing of physical properties of road marking materials by laboratory methods.
The products covered and specified by this document are white and yellow paint, thermoplastic and cold plastic materials, with or without premix glass beads, to be used for permanent and/or temporary road markings on highways and other areas used by vehicular traffic. Other products and colours intended for road markings are not covered in this document.
Not all physical properties listed in this document have to be specified.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16958:2017(Main)
Road marking materials - Conditions for removing/masking road markings
SIST-TP CEN/TR 16958:2018

This document provides guidance for removal or/and masking existing road markings. It includes methods of removal and criteria for selecting the removal method, as well as the requirements for the masking materials and the performance requirements of the resulting surface.
It does not apply to removable temporary road markings, which shall be removed in accordance to the manufacturer instructions.
Some recommendations are given for removing and masking road studs, removing wet paints, removing curing membranes in new cement concrete pavements and cleaning existing road markings.

  • Technical report
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13197:2011+A1:2014(Main)
Road marking materials - Wear simulator Turntable
SIST EN 13197:2011+A1:2014

This European Standard specifies the requirements for wear simulator test for road marking materials intended for use in both permanent and temporary road markings including those with increased retroreflection under wet and rain conditions, without road studs.
It gives description for the equipment and for test plate’s characteristics; it also gives description for the test method involving road marking materials application, test conditions during wear test, parameters to be measured, frequency of the measurements and expression of the results as a test report.
This document gives also the requirements to be followed when the test is to be used for CE marking purposes.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1790:2013(Main)
Road marking materials - Preformed road markings
SIST EN 1790:2013

This European Standard specifies construction products which are white and yellow, removable or non-removable, preformed road marking materials, under the form of tape, cold plastic, thermoplastics with or without drop-on materials, to be used for permanent and/or temporary road markings in circulation areas. Other products and colours intended for road markings are not covered in this European Standard.
This European Standard also gives specifications for the evaluation of conformity for white and yellow, removable or non-removable, preformed road materials under the form of tape, cold plastic, thermoplastics with or without drop-on materials to be used for permanent and/or temporary road markings in circulation areas including type testing and factory production control.
This European Standard includes an Annex ZA for tapes, preformed cold plastic road marking and thermoplastic road marking with and without drop-on materials with the clauses addressing the provisions of the EU Construction Product Directive for permanent road marking.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1423:2012/AC:2013(Corrigendum)
Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
SIST EN 1423:2012/AC:2013

CEN/TC 226 - Modifications to 4.1.3, 4.2.2 and 4.3.3.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1423:2012(Main)
Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
SIST EN 1423:2012

This European Standard specifies the requirements applicable to glass beads, anti-skid aggregates, and the mixture of the two, which are applied as drop-on materials on road markings products (i.e. paints, cold plastics and thermoplastics).
Glass beads and/or anti-skid aggregates, or their mixture, applied during the process of manufacturing other road marking products are not covered by this European Standard.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13459:2011(Main)
Road marking materials - Sampling from storage and testing
SIST EN 13459:2011

This document specifies methods to obtain representative samples of road marking materials for testing and gives the appropriate test methods. The methods to obtain representative samples are described as appropriate for the main product types, i.e. paint, cold plastics, thermoplastics, premix glass beads, drop-on materials, preformed road markings and retroreflecting road studs.
NOTE   This document may apply to the verification and/or identification of consignments of road marking materials or materials held in stock, for example in a warehouse or at the manufacturer's storage facility, or for materials which require checking prior to application.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day