iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13942:2003

(Main)

Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified)

Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Will go to a second parallel enquiry (ZM 971202). ++ Withdrawal from VA/ISO procedure (TC Res 6/1999) (CC/990315) ++ Res 5/2003: normative reference to MSS SP-44:1966, NACE MR 0175:2002, NACE TM 0177:1996 and NACE TM 0284:1996 (NT/030404) ++ Res C22/2001: normative references to ASME B1.1:1989, ASME B1.20.1:1983, ASME B16.5:1996, ASME B16.10:2000, ASME B16.25:1997, ASME B16.34:1996, ASME B16.47:1996, ASME B31.4:1992, ASME B31.8:1995, ASME Boiler and Pressure Vessel Code: 1998, Section V, Section VIII, Division 1, Section VIII, Division 2, Section IX, ASNT SNT TC1A:1996, ASTM A 193/A 193M:2001, ASTM A 320/A 320M:2002, ASTM A 370:2002, ASTM A 388/A 388M: 2001, ASTM A 435/A 435M: 1990, ASTM A 577/A 577M:1990, ASTM A 609/A 609M:1997 and AWS QC1:1996 (NT/030424)

Erdöl- und Erdgasindustrie - Rohrleitungstransportsysteme - Rohrleitungsarmaturen (ISO 14313:1999, modifiziert)

Industrie du pétrole et du gaz naturel - Systèmes de transport par conduites - Robinet de conduites (ISO 14313:1999 modifiée)

Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified)

General Information

Status
Withdrawn
Publication Date
04-Aug-2003
Withdrawal Date
27-Jan-2009
ICS
23.060.01 - Valves in general
75.200 - Petroleum products and natural gas handling equipment
Technical Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Drafting Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
28-Jan-2009
Completion Date
28-Jan-2009
Ref Project
SIST EN 13942:2004 - Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified)

Relations

Replaced By
EN 13942:2009 - Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
Effective Date
04-Feb-2009

Buy Standard

EN 13942:2004EN 13942:2004
PreviousNext
Standard
EN 13942:2004
English language
65 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified)Erdöl- und Erdgasindustrie - Rohrleitungstransportsysteme - Rohrleitungsarmaturen (ISO 14313:1999, modifiziert)Industrie du pétrole et du gaz naturel - Systemes de transport par conduites - Robinet de conduites (ISO 14313:1999 modifiée)Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified)75.200Petroleum products and natural gas handling equipment23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 13942:2003SIST EN 13942:2004en01-maj-2004SIST EN 13942:2004SLOVENSKI
STANDARD



SIST EN 13942:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13942August 2003ICS 23.060.01; 75.200English versionPetroleum and natural gas industries - Pipeline transportationsystems - Pipeline valves (ISO 14313:1999 modified)Industrie du pétrole et du gaz naturel - Systèmes detransport par conduites - Robinet de conduites (ISO14313:1999 modifiée)This European Standard was approved by CEN on 19 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13942:2003 ESIST EN 13942:2004



EN 13942:2003 (E)2ContentsExplanatory Note.4Foreword.5Introduction.61Scope.72Normative references.73Terms and definitions.94Symbols and abbreviations.114.1Symbols.114.2Abbreviations.115Valve types and configurations.125.1Valve types.125.2Valve configurations.136Design.256.1Pressure and temperature rating.256.2Sizes.256.3Face-to-face and end-to-end dimensions.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 14723:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
SIST EN ISO 14723:2009

ISO 14723:2009 specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
ISO 14723:2009 is not applicable to valves for pressure ratings exceeding PN 420 (Class 2500).

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13942:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
SIST EN 13942:2009

This International Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
This International Standard is not applicable to subsea pipeline valves, as they are covered by a separate International Standard (ISO 14723).
This International Standard is not applicable to valves for pressure ratings exceeding PN 420 (Class 2 500).
On-land supply systems used by the gas supply industry are excluded from the scope of this standard.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14141:2013(Main)
Valves for natural gas transportation in pipelines - Performance requirements and tests
SIST EN 14141:2013

This European Standard applies to all valves (plug, ball, gate and check valves) used in onshore transmission pipelines for transport of natural gas in accordance with EN 1594, but with a differing temperature range according to the following three classes in accordance with EN 682:
1)   - 10 °C to 60 °C;
2)   - 20 °C to 60 °C;
3)   the range stated by the purchaser for special design.
This European Standard comprises all valves which are components of the pipeline.
This European Standard specifies valves for pipelines with a maximum operating pressure (MOP) over 16 bar.
Control valves and safety valves are excluded from the scope of this European Standard.
This European Standard specifies requirements and appropriate verification tests carried out during production and for certification purposes to verify that the valves conform to the requirements. A summary of the product and type tests is given in Annex G.
This European Standard makes reference to EN 13942. All the requirements of EN 13942 should be met unless otherwise stated. Paragraphs marked with a dot [•] indicate requirements which are identical to EN 13942.
Additional national requirements and tests in accordance with individual national legal regulations not yet harmonised may be necessary and are to be advised in the purchase order.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14723:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
SIST EN ISO 14723:2009

ISO 14723:2009 specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
ISO 14723:2009 is not applicable to valves for pressure ratings exceeding PN 420 (Class 2500).

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13942:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
SIST EN 13942:2009

This International Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
This International Standard is not applicable to subsea pipeline valves, as they are covered by a separate International Standard (ISO 14723).
This International Standard is not applicable to valves for pressure ratings exceeding PN 420 (Class 2 500).
On-land supply systems used by the gas supply industry are excluded from the scope of this standard.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day