EN ISO 20568-1:2017
(Main)Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20568-1:2017)
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20568-1:2017)
ISO 20568-1:2017 establishes a system of designation for fluoropolymer materials, which may be used as the basis for specifications.
The various types of fluoropolymer are differentiated from each other by a classification system based on appropriate levels of the designatory properties and on information about the intended application and/or method of processing, important properties, additives, colorants, fillers and reinforcing materials.
Kunststoffe — Fluorpolymerdispersionen, Formmassen und Extrusionswerkstoffe — Teil 1: Bezeichnungssystem und Basis für Spezifikationen (ISO 20568-1:2017)
Dieses Dokument legt ein Bezeichnungssystem für Fluorpolymere fest, das als Grundlage für Spezifikationen verwendet werden kann.
Die verschiedenen Typen von Fluorpolymeren werden mit Hilfe eines Einteilungssystems voneinander unterschieden, das auf geeigneten Wertebereichen der kennzeichnenden Eigenschaften und auf Informationen über die vorgesehene Anwendung und/oder Verarbeitungsverfahren, wichtige Eigen-schaften, Zusatzstoffe, Farbstoffe, Füll- und Verstärkungsstoffe, beruht.
Plastiques - Polymères fluorés: dispersions et matériaux pour moulage et extrusion - Partie 1: Système de désignation et base de spécification (ISO 20568-1:2017)
ISO 20568-1:2017 établit un système de désignation des matériaux polymères fluorés qui peut être utilisé comme base pour les spécifications.
Les types de polymères fluorés sont différenciés les uns des autres par un système de classification fondé sur des niveaux appropriés des propriétés de désignation et sur des informations sur l'application prévue et/ou la méthode de mise en ?uvre, les propriétés importantes, les additifs, les colorants, les charges et les matériaux de renfort.
Polimerni materiali - Disperzije in materiali za oblikovanje in ekstrudiranje na osnovi fluoropolimerov - 1. del: Sistem označevanja in podlage za specifikacije (ISO 20568-1:2017)
Ta dokument določa sistem označevanja materialov iz fluoropolimernih materialov, ki jih je mogoče uporabiti kot podlago za specifikacije.
Različne vrste fluoropolimerov se ločujejo glede na sistem razvrščanja, ki temelji na ustreznih ravneh označevalnih lastnostih in na informacijah o načrtovani uporabi in/ali metodi obdelave, pomembnih lastnostih, aditivih, barvilih, polnilih ter materialih za ojačanje.
Za politetrafluoroetilen (PTFE)
Za materiale za oblikovanje in ekstrudiranje na osnovi PTFE in za smole PTFE, pridobljene s koagulacijo disperzije:
– standardna specifična težnost (SSG)
– prostorninska gostota
– velikost zrn
Za vodne disperzije PTFE
– odstotek PTFE v disperziji
– odstotek površinsko aktivnih snovi v disperziji
– stopnja tolerance površinsko aktivnih snovi
Za smole, ki se obdelujejo s taljenjem
Za CPT, ECTFE, EFEP, ETFE, FEP, PFA, PVDF, PVF, VDF/CTFE, VDF/HFP, VDF/TFE, VDF/TFE/HFP
– temperatura tališča
– prostorninski pretok taline
Za PCTFE
– čas ničelne trdnosti (ZST)
Za TFE/PDD
– temperaturna prehodnost stekla (Tg)
Za vodne disperzije smol, ki se obdelujejo s taljenjem (ETFE, FEP, PFA, PVDF, PVF, VDF/CTFE,
VDF/HFP, VDF/TFE, VDF/TFE/HFP)
– odstotek polimera v disperziji
– odstotek površinsko aktivnih snovi v disperziji
– stopnja tolerance površinsko aktivnih snovi
Sistem označevanja se uporablja za vse fluoropolimere in mešanice. Uporablja se za nespremenjene materiale, pripravljene za običajno uporabo, in materiale, ki so spremenjeni na primer z barvili, aditivi, polnili, armirnimi materiali in modifikatorji polimerov.
Materiali z enako oznako nimajo nujno tudi enakih lastnosti. Ta dokument ne podaja inženirskih podatkov, podatkov o delovanju ali podatkov o pogojih obdelave, ki so morda potrebni za določitev materiala. Če so take dodatne lastnosti zahtevane, se določijo v skladu s preskusnimi metodami iz standarda ISO 20568-2, če je to primerno.
Za namene določitve plastomernega materiala za določeno specifikacijo, je treba v podatkovnem bloku 5 navesti dodatne zahteve (glej točko 4.1).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2017
1DGRPHãþD
SIST EN ISO 12086-1:2006
SIST EN ISO 12086-1:2006/AC:2008
3ROLPHUQLPDWHULDOL'LVSHU]LMHLQPDWHULDOL]DREOLNRYDQMHLQHNVWUXGLUDQMHQD
RVQRYLIOXRURSROLPHURYGHO6LVWHPR]QDþHYDQMDLQSRGODJH]DVSHFLILNDFLMH
,62
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1:
Designation system and basis for specifications (ISO 20568-1:2017)
Kunststoffe - Fluorpolymerdispersionen, Formmassen und Extrusionsmaterialien - Teil 1:
Bezeichnungssystem und Basis für Spezifikationen (ISO 20568-1:2017)
Plastiques - Polymère fluoré: dispersions et matériaux pour moulage et extrusion - Partie
1 : Système de désignation et base de spécification (ISO 20568-1:2017)
Ta slovenski standard je istoveten z: EN ISO 20568-1:2017
ICS:
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20568-1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2017
EUROPÄISCHE NORM
ICS 83.080.20 Supersedes EN ISO 12086-1:2006
English Version
Plastics - Fluoropolymer dispersions and moulding and
extrusion materials - Part 1: Designation system and basis
for specifications (ISO 20568-1:2017)
Plastiques - Polymères fluorés: dispersions et Kunststoffe - Fluorpolymerdispersionen, Formmassen
matériaux pour moulage et extrusion - Partie 1: und Extrusionsmaterialien - Teil 1:
Système de désignation et base de spécification (ISO Bezeichnungssystem und Basis für Spezifikationen
20568-1:2017) (ISO 20568-1:2017)
This European Standard was approved by CEN on 29 April 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20568-1:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 20568-1:2017) has been prepared by Technical Committee ISO/TC 61 “Plastics”
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2017, and conflicting national standards
shall be withdrawn at the latest by December 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 12086-1:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20568-1:2017 has been approved by CEN as EN ISO 20568-1:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 20568-1
First edition
2017-05
Plastics — Fluoropolymer dispersions
and moulding and extrusion
materials —
Part 1:
Designation system and basis for
specifications
Plastiques — Polymères fluorés: dispersions et matériaux pour
moulage et extrusion —
Partie 1: Système de désignation et base de spécification
Reference number
ISO 20568-1:2017(E)
©
ISO 2017
ISO 20568-1:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 20568-1:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Designation and specification system . 3
4.1 General . 3
4.2 Data block 1 . 4
4.3 Data block 2 . 5
4.4 Data block 3 . 6
4.5 Data block 4 . 7
4.6 Data block 5 .12
5 Examples of designations .13
ISO 20568-1:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: w w w . i s o .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9,
Thermoplastic materials.
This first edition of ISO 20568-1 cancels and replaces ISO 12086-1:2006, which has been technically
revised to introduce a new designation system.
A list of all the parts in the ISO 20568 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved
INTERNATIONAL STANDARD ISO 20568-1:2017(E)
Plastics — Fluoropolymer dispersions and moulding and
extrusion materials —
Part 1:
Designation system and basis for specifications
1 Scope
This document establishes a system of designation for fluoropolymer materials, which may be used as
the basis for specifications.
The various types of fluoropolymer are differentiated from each other by a classification system based
on appropriate levels of the designatory properties and on information about the intended application
and/or method of processing, important properties, additives, colorants, fillers and reinforcing
materials.
For polytetrafluoroethylene (PTFE)
For PTFE granular moulding and ram extrusion materials, and for PTFE resin produced from
coagulation of dispersion:
— standard specific gravity (SSG)
— bulk density
— particle size
For aqueous dispersion of PTFE
— PTFE percentage in dispersion
— surfactant percentage in dispersion
— surfactant tolerance level
For melt processable resins
For CPT, ECTFE, EFEP, ETFE, FEP, PFA, PVDF, PVF, VDF/CTFE, VDF/HFP, VDF/TFE, VDF/TFE/HFP
— melting-peak temperature
— melt mass-flow rate
For PCTFE
— zero-strength time (ZST)
For TFE/PDD
— glass transition temperature (T )
g
For aqueous dispersion of melt processable resins (ETFE, FEP, PFA, PVDF, PVF, VDF/CTFE,
VDF/HFP, VDF/TFE, VDF/TFE/HFP)
— polymer percentage in dispersion
— surfactant percentage in dispersion
ISO 20568-1:2017(E)
— surfactant tolerance level
The designation system is applicable to all fluoropolymers and blends. It applies to unmodified materials
ready for normal use and materials modified, for example, by colorants, additives, fillers, reinforcing
materials and polymer modifiers.
It is not intended to imply that materials having the same designation give necessarily the same
performance. This document does not provide engineering data, performance data or data on processing
conditions which may be required to specify a material. If such additional properties are required, they
are intended to be determined in accordance with the test methods specified in ISO 20568-2, if suitable.
In order to specify a thermoplastic material for a particular specification, the requirements are to be
given in data block 5 (see 4.1).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 472, Plastics — Vocabulary
ISO 1043-1, Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special
characteristics
ISO 1133-1, Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR)
of thermoplastics — Part 1: Standard method
ISO 11357-2, Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition
temperature and glass transition step height
ISO 11357-3, Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature
and enthalpy of melting and crystallization
ISO 20568-2, Plastics — Fluoropolymer dispersions and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.