Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018)

This document specifies requirements for the design, manufacture and marking of offshore containers with a maximum gross mass not exceeding 25 000 kg, intended for repeated use to, from and between offshore installations and ships.
This document specifies only transport-related requirements.

Offshore-Container und dazugehörige Anschlaggarnituren - Teil 1: Auslegung, Herstellung und Kennzeichnung (ISO 10855-1:2018)

Containers offshore et dispositifs de levage associés - Partie 1: Conception, fabrication et marquage des containers offshore (ISO 10855-1:2018)

Le présent document spécifie les exigences relatives à la conception, à la fabrication et au marquage des conteneurs offshore ayant une masse brute maximale inférieure ou égale à 25 000 kg, destinés à un usage répété à destination, en provenance ou entre des installations en mer et des navires.
Le présent document spécifie uniquement les exigences liées au transport.

Plavajoče kontejnerske enote in z njimi povezan dvižni pribor - 1. del: Načrtovanje, izdelava in označevanje plavajočih kontejnerskih enot (ISO 10855-1:2018)

Ta dokument določa zahteve za načrtovanje, izdelavo in označevanje plavajočih kontejnerskih enot z največjo bruto maso, ki ne presega 25 000 kg, ki so namenjene za večkratni prenos na plavajoče enote in ladje, z njih ter med njimi.
Ta dokument določa samo s transportom povezane zahteve.

General Information

Status
Published
Publication Date
10-Jul-2018
Withdrawal Date
30-Jan-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Jul-2018
Completion Date
11-Jul-2018

Relations

Buy Standard

Standard
EN ISO 10855-1:2018
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 10855-1:2016
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10855-1:2018
01-oktober-2018
1DGRPHãþD
SIST EN 12079-1:2007
3ODYDMRþHNRQWHMQHUVNHHQRWHLQ]QMLPLSRYH]DQGYLåQLSULERUGHO1DþUWRYDQMH
L]GHODYDLQR]QDþHYDQMHSODYDMRþLKNRQWHMQHUVNLKHQRW ,62
Offshore containers and associated lifting sets - Part 1: Design, manufacture and
marking of offshore containers (ISO 10855-1:2018)
Offshore container - Teil 1: Auslegung, Herstellung und Kennzeichnung (ISO 10855-
1:2018)
Containers offshore - Partie 1: Conception, fabrication et marquage (ISO 10855-1:2018)
Ta slovenski standard je istoveten z: EN ISO 10855-1:2018
ICS:
55.180.10 9HþQDPHQVNLNRQWHMQHUML General purpose containers
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
SIST EN ISO 10855-1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10855-1:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 10855-1:2018


EN ISO 10855-1
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2018
EUROPÄISCHE NORM
ICS 75.180.10 Supersedes EN 12079-1:2006
English Version

Offshore containers and associated lifting sets - Part 1:
Design, manufacture and marking of offshore containers
(ISO 10855-1:2018)
Containers offshore et dispositifs de levage associés - Offshore-Container und dazugehörige
Partie 1: Conception, fabrication et marquage des Anschlaggarnituren - Teil 1: Auslegung, Herstellung
containers offshore (ISO 10855-1:2018) und Kennzeichnung (ISO 10855-1:2018)
This European Standard was approved by CEN on 30 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10855-1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10855-1:2018
EN ISO 10855-1:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10855-1:2018
EN ISO 10855-1:2018 (E)
European foreword
This document (EN ISO 10855-1:2018) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries"
in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2019, and conflicting national standards shall
be withdrawn at the latest by January 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12079-1:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsem
...

SLOVENSKI STANDARD
oSIST prEN ISO 10855-1:2016
01-februar-2016
3ODYDMRþHNRQWHMQHUVNHHQRWHLQ]QMLPLSRYH]DQGYLåQLSULERUGHO3ODYDMRþH
NRQWHMQHUVNHHQRWH1DþUWRYDQMHL]GHODYDLQR]QDþHYDQMH ,62',6
Offshore containers and associated lifting sets - Part 1: Offshore container - Design,
manufacture and marking (ISO/DIS 10855-1:2015)
Offshore container - Teil 1: Auslegung, Herstellung und Kennzeichnung (ISO/DIS 10855-
1:2015)
Containers offshore - Partie 1: Conception, fabrication et marquage (ISO/DIS 10855-
1:2015)
Ta slovenski standard je istoveten z: prEN ISO 10855-1
ICS:
55.180.10 9HþQDPHQVNLNRQWHMQHUML General purpose containers
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
oSIST prEN ISO 10855-1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10855-1:2016

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10855-1:2016
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10855-1
ISO/TC 67/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
2015-12-10 2016-03-10
Offshore containers and associated lifting sets —
Part 1:
Offshore container - Design, manufacture and marking
Containers offshore —
Partie 1: Conception, fabrication et marquage
ICS: 75.180.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10855-1:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10855-1:2016
ISO/DIS 10855-1:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10855-1:2016
ISO/WD 10855-1
Contents Page
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
2.1 Material standards . 1
2.2 Standards for welders and welding . 2
2.3 Standards for inspection and NDE . 2
2.4 Other standards and regulations . 3
3 Terms and definitions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.