EN 12697-5:2009
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
This European Standard specifies test methods for determining the maximum density of a bituminous mixture (voidless mass). It specifies a volumetric procedure, a hydrostatic procedure and a mathematical procedure.
The test methods described are intended for use with loose bituminous materials containing paving grade bitumens, modified binders or other bituminous binders used for hot mix asphalt. The tests are suitable for both fresh or aged bituminous materials.
NOTE 1 Samples may be supplied as loose material or as compacted material; the latter should be separated first.
NOTE 2 General guidance on selection of a test procedure to determine the maximum density of a bituminous mixture is given in Annex A.
Asphalt - Prüfverfahren für Heißasphalt - Teil 5: Bestimmung der Rohdichte
Diese Europäische Norm legt Prüfverfahren zur Bestimmung der Rohdichte (hohlraumfreie Masse) von
Asphalt fest. Sie legt ein volumetrisches, ein Auftriebs- und ein mathematisches Verfahren fest.
Die beschriebenen Prüfverfahren sind zur Anwendung auf unverdichteten Asphalt bestimmt, der Straßenbaubitumen,
modifiziertes Bitumen oder sonstige bitumenhaltige Bindemittel für Heißasphalt enthält. Die Verfahren
sind sowohl für frisch hergestellten als auch für bereits verarbeiteten Asphalt geeignet.
ANMERKUNG 1 Die Proben können als lockerer oder als verdichteter Asphalt angeliefert werden; verdichteter Asphalt
sollte vor der Prüfung zerlegt werden.
ANMERKUNG 2 Anhang A enthält grundsätzliche Hinweise zur Auswahl des Prüfverfahrens für die Bestimmung der
Rohdichte von Asphalt.
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 5: Masse volumique réelle (MVR) des matériaux bitumineux
La présente Norme européenne spécifie des méthodes d'essai permettant de déterminer la masse volumique maximale (masse volumique réelle) des matériaux bitumineux. Elle spécifie une méthode volumétrique, une méthode hydrostatique et une méthode par calcul.
Les méthodes d'essai décrites sont destinées à être utilisées pour des matériaux foisonnés contenant des bitumes purs, des liants modifiés ou d'autres liants bitumineux utilisés pour les enrobés à chaud. Les essais sont applicables aux matériaux bitumineux, qu'ils soient neufs ou anciens.
NOTE 1 Les échantillons peuvent être fournis sous la forme de matériaux foisonnés ou de matériaux compacts. Il convient que ces derniers soient d'abord désagrégés.
NOTE 2 Les lignes directrices générales relatives au choix d’un mode opératoire permettant de déterminer la masse volumique réelle d'un mélange bitumineux sont données dans l'annexe A.
Bitumenske zmesi - Preskusne metode za vroče asfaltne zmesi - 5. del: Ugotavljanje največje gostote
Ta evropski standard določa preskusne metode za določanje največje gostote bitumenske zmesi (mase brez praznin). Določa volumetrični postopek, hidrostatski postopek in matematični postopek. Opisane preskusne metode se uporabljajo z razsutimi bitumenskimi materiali, ki vsebujejo bitumen za tlakovanje, spremenjena veziva ali druga bitumenska veziva, ki se uporabljajo za vroče asfaltne zmesi. Preskusi so primerni za sveže in starane bitumenske materiale.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GHOAsphalt - Prüfverfahren für Heißasphalt - Teil 5: Bestimmung der RohdichteMélanges bitumineux - Essais pour enrobés à chaud - Partie 5: Masse volumique réelle (MVR) des matériaux bitumineuxBituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-5:2009SIST EN 12697-5:2010en,fr,de01-februar-2010SIST EN 12697-5:2010SLOVENSKI
STANDARDSIST EN 12697-5:2004+A1:20071DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-5
December 2009 ICS 93.080.20 Supersedes EN 12697-5:2002+A1:2007English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 5: Masse volumique réelle (MVR) des matériaux bitumineux
Asphalt - Prüfverfahren für Heißasphalt - Teil 5: Bestimmung der Rohdichte This European Standard was approved by CEN on 10 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-5:2009: ESIST EN 12697-5:2010
General guidance on selection of a test procedure to determine the maximum density of bituminous materials . 14A.1 General . 14A.2 Using water and solvent . 14A.3 Using the mathematical procedure . 15Annex B (informative)
Determination of the binder absorption characteristics of the mineral aggregate for bituminous materials. 16Annex C (normative)
Procedure for the calibration of a pyknometer . 19Bibliography . 20 SIST EN 12697-5:2010
EN 12697-16, Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded tyres EN 12697-17, Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous asphalt specimen EN 12697-18, Bituminous mixtures — Test methods for hot mix asphalt — Part 18: Binder drainage
EN 12697-19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen EN 12697-20, Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube or Marshall specimen EN 12697-21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking EN 12697-23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the indirect tensile strength of bituminous specimens EN 12697-24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue EN 12697-25, Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression test EN 12697-26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling EN 12697-28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples for determining binder content, water content and grading EN 12697-29, Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of the dimensions of bituminous specimen EN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor EN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test EN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing EN 12697-36, Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the thickness of a bituminous pavement EN 12697-37, Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for HRA SIST EN 12697-5:2010
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switz
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.