EN ISO 1158:1998
(Main)Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998)
Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998)
Kunststoffe - Vinylchloridhomopolymere und Copolymere - Bestimmung des Chlorgehalts (ISO 1158:1998)
Diese Internationale Norm befaßt sich mit zwei Verfahren zur Bestimmung des Chlors in Homopolymeren und Copolymeren des Vinylchlorids in Abwesenheit von Weichmachern oder Additiven: - Verfahren A (Verbrennen in einer Bombe); - Verfahren B (Verbrennen in einem Glaskolben). Warnung: Alle Vorsichtsmaßnahmen müssen getroffen werden, besonders die im Text dieser Internationalen Norm angegebenen, um die Ausführenden vor den Risiken beider Verfahren zu schützen.
Plastiques - Homopolymères et copolymères de chlorure de vinyle - Dosage du chlore (ISO 1158:1998)
Polimerni materiali - Homo- in kopolimeri vinilklorida - Določevanje klora (ISO 1158:1998)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 1158:2000
01-maj-2000
3ROLPHUQLPDWHULDOL+RPRLQNRSROLPHULYLQLONORULGD'RORþHYDQMHNORUD ,62
Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine
content (ISO 1158:1998)
Kunststoffe - Vinylchloridhomopolymere und Copolymere - Bestimmung des
Chlorgehalts (ISO 1158:1998)
Plastiques - Homopolymeres et copolymeres de chlorure de vinyle - Dosage du chlore
(ISO 1158:1998)
Ta slovenski standard je istoveten z: EN ISO 1158:1998
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 1158:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 1158:2000
---------------------- Page: 2 ----------------------
SIST EN ISO 1158:2000
---------------------- Page: 3 ----------------------
SIST EN ISO 1158:2000
---------------------- Page: 4 ----------------------
SIST EN ISO 1158:2000
INTERNATIONAL ISO
STANDARD 1158
Third edition
1998-04-01
Plastics — Vinyl chloride homopolymers
and copolymers — Determination of
chlorine content
Plastiques — Homopolymères et copolymères de chlorure de vinyle —
Dosage du chlore
A
Reference number
ISO 1158:1998(E)
---------------------- Page: 5 ----------------------
SIST EN ISO 1158:2000
ISO 1158:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 1158 was prepared by Technical Committee
ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic materials.
This third edition cancels and replaces the second edition (ISO 1158:1984),
which has been technically revised.
© ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet central@iso.ch
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii
---------------------- Page: 6 ----------------------
SIST EN ISO 1158:2000
©
INTERNATIONAL STANDARD ISO ISO 1158:1998(E)
Plastics — Vinyl chloride homopolymers and copolymers —
Determination of chlorine content
WARNING — All precautions shall be taken, particularly those mentioned in the text of the present
International Standard, to protect operators from risks presented by both methods.
1 Scope
This International Standard specifies two methods for the determination of the chlorine content of homopolymers
and copolymers of vinyl chloride, free from plasticizers or additives, namely:
— method A (combustion in a bomb);
— method B (combustion in a flask).
2 Principle
A test portion is oxidised with sodium peroxide (method A) or gaseous oxygen (method B) followed by
potentiometric or volumetric titration of the resulting chlorides.
3 Reagents
During the analysis, use only reagents of recognized grade, and only distilled water or water of equivalent purity.
3.1 Silver nitrate, standard volumetric solution, c(AgNO ) = 0,1 mol/l or 0,05 mol/l.
3
3.2 Nitric acid solution, c(HNO ) = 2 mol/l.
3
For method A only:
3.3 concentrated.
Nitric acid,
3.4 Sodium peroxide, granulated.
3.5 Starch, sucrose or ethylene glycol, as combustion aids.
1
---------------------- Page: 7 ----------------------
SIST EN ISO 1158:2000
©
ISO 1158:1998(E) ISO
For method B only:
3.6 Oxygen, gaseous.
3.7 Sodium nitrate.
3.8 Potassium hydroxide solution, 100 g/l.
3.9 Hydrogen peroxide solution, 300 g/l.
4 Apparatus
4.1 Drying oven, capable of being maintained at 50 °C – 2 °C or 75 °C – 2 °C.
4.2 Balance, to weigh to an accuracy of 0,1 mg (method A) or 0,01 g (method B).
4.3 Equipment for Volhard titration or for potentiometric titration, with a burette having a capacity and
accuracy appropriate to the chosen method (A or B).
For method A only:
4.4 Combustion bomb, (for example Parr bomb or another bomb which gives the same results), gas or
electrically fired. An example of a suitable gas-fired bomb
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.