EN ISO 12683:2004

Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004)

ISO 12683:2004 specifies the requirements for coatings of zinc that have been mechanically deposited on to fabricated metal articles to protect them from corrosion. It also describes the related test methods.

Durch mechanisches Plattieren aufgebrachte Zinküberzüge - Anforderungen und Prüfverfahren (ISO 12683:2004)

Diese Norm legt die Anforderungen an mechanisch aufgebrachte Zinküberzüge auf vorgefertigten Gegenständen fest, um sie gegen Korrosion zu schützen. Prüfverfahren werden ebenfalls beschrieben. ANMERKUNG Anhang A beschreibt den als Kugelplattieren bezeichneten mechanischen Vorgang des Aufbringens eines Überzugs; das aufgebrachte Metall ist Zink.

Dépôts de zinc par voie mécanique (matoplastie) - Spécifications et méthodes de contrôle (ISO 12683:2004)

L'ISO 12683:2004 donne les exigences à satisfaire pour les revêtements de zinc déposés par voie mécanique, sur des pièces métalliques afin de les protéger contre la corrosion. Elle décrit aussi les méthodes de contrôle correspondantes.

Mehansko nanesene cinkove prevleke – Zahteve in preskusne metode (ISO 12683:2004)

General Information

• Status: Published
• Publication Date: 31-Oct-2004
• ICS: 25.220.40 - Metallic coatings
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 18-Nov-2009
• Completion Date: 18-Nov-2009
• Ref Project: SIST EN ISO 12683:2005 - Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12683:2005
01-januar-2005
Mehansko nanesene cinkove prevleke – Zahteve in preskusne metode (ISO
12683:2004)
Mechanically deposited coatings of zinc - Specification and test methods (ISO
12683:2004)
Durch mechanisches Plattieren aufgebrachte Zinküberzüge - Anforderungen und
Prüfverfahren (ISO 12683:2004)
Dépôts de zinc par voie mécanique (matoplastie) - Spécifications et méthodes de
contrôle (ISO 12683:2004)
Ta slovenski standard je istoveten z: EN ISO 12683:2004
ICS:
25.220.40 Kovinske prevleke Metallic coatings
SIST EN ISO 12683:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12683:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 12683:2005
EUROPEAN STANDARD
EN ISO 12683
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2004
ICS 25.220.40
English version
Mechanically deposited coatings of zinc - Specification and test
methods (ISO 12683:2004)
Dépôts de zinc par voie mécanique (matoplastie) - Durch mechanisches Plattieren aufgebrachte Zinküberzüge
Spécifications et méthodes de contrôle (ISO 12683:2004) - Anforderungen und Prüfverfahren (ISO 12683:2004)
This European Standard was approved by CEN on 24 June 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12683:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12683:2005
EN ISO 12683:2004 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Information and requirements to be agreed and documented by the purchaser .5
4.1 General.5
4.2 Essential information .5
4.3 Additional information .5
5 Substrate .6
6 Classification and designation of coatings .6
6.1 Service condition number.6
6.2 Class of zinc coating thickness and type of supplementary treatment.6
7 Requirements for pretreatments.7
7.1 Stress relief treatment before coating.7
7.2 Cleaning.7
8 Inspection .
...