EN ISO 2177:2004
(Main)Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003)
Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003)
ISO 2177:2002 describes a coulometric method by anodic dissolution for measuring the thickness of metallic coatings. It is only applicable to conductive coatings.
Typical combinations of coatings and substrates that can be tested by this method are given. Other combinations may be tested with electrolytes in current use, or new electrolytes may be developed for them but, in both cases, it is necessary to verify the suitability of the complete system.
ISO 2177:2002 is also applicable to multi-layer systems, e.g Cu-Ni-Cr. It may be used to measure the thickness of coatings applied by various means, if due account is taken of special features such as the presence of an alloy layer. In some cases, the presence and thickness of diffusion layers can also be measured. It can also be used to measure the thickness of coatings on cylindrical specimens and wires.
Metallische Überzüge - Schichtdickenmessung - Coulometrisches Verfahren durch anodisches Ablösen (ISO 2177:2003)
Diese internationale Norm beschreibt ein coulometrisches Verfahren, bei dem durch anodisches Ablösen die Dicke metallischer Schichten gemessen wird.
Typische Systeme von Schicht- und Substratwerkstoffen, die nach diesem Verfahren gemessen werden können, sind in Tabelle 1 angegeben.
Andere Kombinationen können mit gebräuchlichen Elektrolyten (siehe Anhang A) gemessen werden oder es können neue Elektrolyte dafür entwickelt werden. In beiden Fällen ist es jedoch notwendig, die Eignung des Gesamtsystems zu überprüfen.
Die Norm ist auch für Mehrschichtsysteme, z. B. Cu/Ni/Cr, anwendbar (siehe auch 8.5).
Das Verfahren kann zur Messung der Dicke von Schichten eingesetzt werden, die auf verschiedene Weise aufgebracht wurden, wenn spezielle Eigenschaften (wie z. B. durch eine vorhandene Legierungsschicht) berücksichtigt werden. In einigen Fällen kann auch das Vorhandensein und die Dicke von Diffusionsschichten gemessen werden. Es sind auch Schichtdickenmessungen an zylindrischen Proben und Drähten möglich (siehe 8.7).
Revêtements métalliques - Mesurage de l'épaisseur - Méthode coulométrique par dissolution anodique (ISO 2177:2003)
L'ISO 2177:2002 décrit une méthode coulométrique de mesurage, par dissolution anodique, de l'épaisseur des revêtements métalliques. Elle n'est applicable qu'aux dépôts conducteurs.
Elle donne des combinaisons types de dépôts et de métaux de base qui peuvent être mesurés selon cette méthode. D'autres combinaisons peuvent être essayées avec des électrolytes d'usage courant, ou avec de nouveaux électrolytes mis au point à cet effet mais il est, dans les deux cas, nécessaire de vérifier l'aptitude à l'emploi du système complet.
L'ISO 2177:2002 est également applicable aux systèmes multicouches, par exemple Cu-Ni-Cr. Elle peut aussi être utilisée pour mesurer l'épaisseur de revêtements appliqués par divers moyens, s'il est tenu compte des particularités telles que la présence d'une couche d'alliage. Dans certains cas, il est également possible de déceler la présence et de mesurer l'épaisseur de couches de diffusion. Elle peut enfin être utilisée pour mesurer l'épaisseur des revêtements déposés sur des échantillons cylindriques et des fils.
Kovinske prevleke - Merjenje debeline prevleke - Kulometrična metoda z anodnim raztapljanjem (ISO 2177:2003)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metallische Überzüge - Schichtdickenmessung - Coulometrisches Verfahren durch anodisches Ablösen (ISO 2177:2003)Revetements métalliques - Mesurage de l'épaisseur - Méthode coulométrique par dissolution anodique (ISO 2177:2003)Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003)25.220.40Kovinske prevlekeMetallic coatingsICS:Ta slovenski standard je istoveten z:EN ISO 2177:2004SIST EN ISO 2177:2004en01-september-2004SIST EN ISO 2177:2004SLOVENSKI
STANDARDSIST EN ISO 2177:19991DGRPHãþD
SIST EN ISO 2177:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 2177May 2004ICS 25.220.40Supersedes EN ISO 2177:1994English versionMetallic coatings - Measurement of coating thickness -Coulometric method by anodic dissolution (ISO 2177:2003)Revêtements métalliques - Mesurage de l'épaisseur -Méthode coulométrique par dissolution anodique (ISO2177:2003)Metallische Überzüge - Schichtdickenmessung -Coulometrisches Verfahren durch anodisches Ablösen(ISO 2177:2003)This European Standard was approved by CEN on 1 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 2177:2004 ESIST EN ISO 2177:2004
EN ISO 2177:2004 (E)2ForewordThe text of ISO 2177:2003 has been prepared by Technical Committee ISO/TC 107 "Metallicand other inorganic coatings” of the International Organization for Standardization (ISO) and hasbeen taken over as EN ISO 2177:2004 by Technical Committee CEN/TC 262 "Metallic and otherinorganic coatings", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by November 2004, and conflicting nationalstandards shall be withdrawn at the latest by November 2004.This document supersedes EN ISO 2177:1994.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium,Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Endorsement noticeThe text of ISO 2177:2003 has been approved by CEN as EN ISO 2177:2004 without anymodifications.NOTE
Normative references to International Standards are listed in Annex ZA (normative).SIST EN ISO 2177:2004
EN ISO 2177:2004 (E)3Annex ZA(normative)Normative references to international publicationswith their relevant European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions ofany of these publications apply to this European Standard only when incorporated in it byamendment or revision. For undated references the latest edition of the publication referred toapplies (including amendments).NOTE Where an International Publication has been modified by common modifications, indicatedby (mod.), the relevant EN/HD applies.PublicationYearTitleENYearISO 20641996Metallic and other inorganic coatings- Definitions and conventionsconcerning the measurement ofthicknessEN ISO 20642000SIST EN ISO 2177:2004
SIST EN ISO 2177:2004
Reference numberISO 2177:2003(E)© ISO 2003
INTERNATIONAL STANDARD ISO2177Third edition2003-03-15Metallic coatings — Measurement of coating thickness —Coulometric method by anodic dissolution Revêtements métalliques — Mesurage de l'épaisseur — Méthode coulomét
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.