Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties

This European Standard specifies requirements for flat products for pressure equipment made of nickel alloy steels
as specified in Table 1.
The requirements and definitions of EN 10028-1 also apply.
NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of
conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this
European Standard (Part 1 and this Part 4 of the series) and does not presume adequacy of the material to a specific item of
equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements
of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.

Flacherzeugnisse aus Druckbehälterstählen - Teil 4: Nickellegierte kaltzähe Stähle

In dieser Europäischen Norm sind die Anforderungen an Flacherzeugnisse für Druckbehälter aus den nickellegierten
Stählen nach Tabelle 1 festgelegt.
Zusätzlich gelten die Anforderungen und Begriffe in EN 10028-1:2007+A1:2009.
ANMERKUNG Nach Veröffentlichung dieser Europäischen Norm im EU-Amtsblatt (OJEU) unter der Richtlinie
97/23/EC ist die Annahme ihrer Konformität mit den grundlegenden Anforderungen (ESR) der Richtlinie 97/23/EC auf die
technischen Daten von Werkstoffen in dieser Europäischen Norm (Teil 1 und dieser Teil 4 der Normenreihe) beschränkt,
und es darf nicht angenommen werden, dass damit die Eignung des Werkstoffs für ein bestimmtes Ausrüstungsteil
festgestellt ist. Folglich müssen die in dieser Werkstoffnorm angegebenen technischen Parameter im Hinblick auf die
konstruktiven Anforderungen dieses bestimmten Ausrüstungsteils ermittelt werden, um damit zu verifizieren, dass den
ESR der Richtlinie 97/23/EC entsprochen wird.

Produits plats en aciers pour appareils à pression - Partie 4: Aciers alliés au nickel avec caractéristiques spécifiées à basse température

La présente Norme européenne spécifie les prescriptions relatives aux produits plats pour appareils à pression en
aciers alliés au nickel, telles que spécifiées dans le Tableau 1.
Les prescriptions et définitions de l’EN 10028-1 :2007 + A1 :2009 s’appliquent également.
NOTE Après publication de la présente Norme européenne dans le Journal Officiel de l'UE (OJEU) sous la Directive
97/23/EC, la présomption de conformité aux Exigences Essentielles de Sécurité (ESRs) de la Directive 97/23/EC se limite aux
données techniques des matériaux de la présente Norme européenne (Partie 1 et la présente Partie 4 de la série) et ne
suppose pas l'adéquation du matériau à un élément ou à un équipement spécifique. En conséquence, l'évaluation des données
techniques énoncées dans la présente norme de matériau en fonction des exigences de conception de cet élément spécifique
d'équipement pour vérifier que les ESR de la Directive 97/23/EC sont respectées, doit être effectuée.

Ploščati jekleni izdelki za tlačne posode - 4. del: Jekla, legirana z nikljem, s specificiranimi lastnostmi pri nizkih temperaturah

General Information

Status
Withdrawn
Publication Date
16-Jun-2009
Withdrawal Date
25-Jul-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
26-Jul-2017

Relations

Buy Standard

Standard
EN 10028-4:2009
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flacherzeugnisse aus Druckbehälterstählen - Teil 4: Nickellegierte kaltzähe StähleProduits plats en aciers pour appareils à pression - Partie 4: Aciers alliés au nickel avec caractéristiques spécifiées à basse températureFlat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties77.140.50SROL]GHONLFlat steel products and semi-products77.140.30Jekla za uporabo pod tlakomSteels for pressure purposesICS:Ta slovenski standard je istoveten z:EN 10028-4:2009SIST EN 10028-4:2009en,fr,de01-september-2009SIST EN 10028-4:2009SLOVENSKI
STANDARDSIST EN 10028-4:2003/AC:2006SIST EN 10028-4:20031DGRPHãþD



SIST EN 10028-4:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10028-4June 2009ICS 77.140.30; 77.140.50Supersedes EN 10028-4:2003
English VersionFlat products made of steels for pressure purposes - Part 4:Nickel alloy steels with specified low temperature propertiesProduits plats en aciers pour appareils à pression - Partie4: Aciers alliés au nickel avec caractéristiques spécifiées àbasse températureFlacherzeugnisse aus Druckbehälterstählen - Teil 4:Nickellegierte kaltzähe StähleThis European Standard was approved by CEN on 14 May 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10028-4:2009: ESIST EN 10028-4:2009



EN 10028-4:2009 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Dimensions and tolerances on dimensions . 4 5 Calculation of mass . 4 6 Classification and designation . 4 6.1 Classification . 4 6.2 Designation . 4 7 Information to be supplied by the purchaser . 4 7.1 Mandatory information . 4 7.2 Options . 5 7.3 Example for ordering . 5 8 Requirements . 5 8.1 Steelmaking process .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.