Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test

This European Standard specifies a test method for determining the stability, flow and the Marshall Quotient values of specimens of bituminous mixtures mixed according to EN 12697-35:2004+A1 and prepared using the impact compactor method of test EN 12697-30. It is limited to dense graded asphalt concrete and hot rolled asphalt.

Asphalt - Prüfverfahren für Heißasphalt - Teil 34: Marshall-Prüfung

Diese Europäische Norm legt ein Prüfverfahren fest zur Bestimmung von Stabilität, Fließwert und Marshall-Quotient von Probekörpern aus nach !EN 12697 35:2004 + A1" gemischtem Asphalt, die nach dem Schlagverdichter-Prüfverfahren !EN 12697 30:2004 + A1" hergestellt wurden. Es ist nur auf dichten Asphaltbeton und Hot-Rolled-Asphalt anwendbar.

Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 34: Essai Marshall

La présente Norme européenne spécifie une méthode d’essai pour déterminer la stabilité, le fluage et les valeurs du quotient Marshall des éprouvettes de mélanges bitumineux malaxés selon !l’EN 12697-35:2004+A1" et compactés à l’aide d’un compacteur à impact selon !l’EN 12697-30:2004+A1". Elle est limitée aux bétons bitumineux denses et aux «hot rolled asphalt».

Bitumenske zmesi - Preskusne metode za vroče asfaltne zmesi - 34. del: Preskus po Marshallu

General Information

Status
Withdrawn
Publication Date
03-Jul-2007
Withdrawal Date
08-May-2012
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
09-May-2012
Completion Date
09-May-2012

Relations

Buy Standard

Standard
EN 12697-34:2004+A1:2007
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall testMélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 34: Essai MarshallAsphalt - Prüfverfahren für Heißasphalt - Teil 34: Marshall-PrüfungTa slovenski standard je istoveten z:EN 12697-34:2004+A1:2007SIST EN 12697-34:2004+A1:2007en,fr,de93.080.20Materiali za gradnjo cestRoad construction materialsICS:SLOVENSKI
STANDARDSIST EN 12697-34:2004+A1:200701-november-2007







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-34:2004+A1
July 2007 ICS 93.080.20 Supersedes EN 12697-34:2004English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 34: Essai Marshall
Asphalt - Prüfverfahren für Heißasphalt - Teil 34: Marshall-Prüfung This European Standard was approved by CEN on 1 April 2004 and includes Amendment 1 approved by CEN on 16 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-34:2004+A1:2007: E



EN 12697-34:2004+A1:2007 (E) 2 Contents page Foreword.3 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 Principle.7 5 Apparatus.7 6 Procedure.7 7 Expression of results.8 8 Test report.9 9 Precision.9 Annex A (normative)
Marshall quotient.10 Annex B (normative)
Testing head.11 Bibliography.13



EN 12697-34:2004+A1:2007 (E) 3 Foreword This document (EN 12697-34:2004+A1:2007) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008 and conflicting national standards shall be withdrawn at the latest by January 2008. This document includes Amendment 1, approved by CEN on 2007-05-16. This document supersedes EN 12697-3
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.