EN 12976-1:2017

Thermal solar systems and components - Factory made systems - Part 1: General requirements

This European Standard specifies requirements on durability, reliability and safety for Factory Made solar heating systems. The standard also includes provisions for evaluation of conformity to these requirements. Concept of system families is included, as well.
The requirements in this standard apply to Factory Made solar systems as products. The installation of these systems including their integration with roofs or facades is not considered, but requirements are given for the documentation for the installer and the user to be delivered with the system (see also 4.6).
External auxiliary water heating devices that are placed in series with the Factory Made system are not considered to be part of the system. Cold water piping from the cold water grid to the system as well as piping from the system to an external auxiliary heater or to draw-off points is not considered to be part of the system. Piping between components of the Factory Made system is considered to be part of the system. Any integrated heat exchanger or piping for space heating option (see Introduction, last paragraph) is not considered to be part of the system.

Thermische Solaranlagen und ihre Bauteile - Vorgefertigte Anlagen - Teil 1: Allgemeine Anforderungen

Diese Europäische Norm legt Anforderungen hinsichtlich Dauerhaftigkeit, Zuverlässigkeit und Sicherheit für vorgefertigte Solaranlagen fest. Die Norm enthält auch Vorgaben für die Bewertung der Konformität mit diesen Anforderungen. Das Konzept von Anlagenfamilien ist ebenfalls enthalten.
Die Anforderungen in dieser Norm gelten für vorgefertigte Solaranlagen als Produkte. Der Einbau dieser Anlagen, einschließlich ihrer Anbringung an Dächern oder Fassaden wird nicht berücksichtigt, es sind jedoch Anforderungen hinsichtlich der Dokumentation für den Installateur und den Anwender, die mit diesen Anlagen geliefert werden müssen, angegeben (siehe auch 4.6).
Äußere zusätzliche Heizeinrichtungen zur Wassererwärmung, die serienmäßig an der vorgefertigten Anlage angeordnet sind, werden nicht als Bestandteil der Anlage betrachtet. Kaltwasserleitungen, die vom Kalt¬wasserversorgungsnetz zur Anlage führen, sowie Leitungen von der Anlage zu einer äußeren Zusatzwärmequelle oder zu Zapfstellen werden nicht als Teil der Anlage betrachtet. Die Verrohrung zwischen den Bauteilen der vorgefertigten Anlage wird als Teil der Anlage betrachtet. Ein möglicherweise vorhandener Wärmetauscher oder eine Verrohrung für die Möglichkeit der Raumheizung (siehe Einleitung, letzter Abschnitt) wird nicht als Teil der Anlage betrachtet.

Installations solaires thermiques et leurs composants - Installations préfabriquées en usine - Partie 1 : Exigences générales

La présente Norme européenne spécifie les exigences de durabilité, de fiabilité et de sécurité requises des installations de chauffage solaire préfabriquées en usine. Elle contient également des dispositions relatives à l’évaluation de la conformité à ces exigences. Le concept de familles d'installations est également inclut.
Les exigences de la présente Norme s’appliquent aux installations solaires préfabriquées en usine en tant que produits. Leur montage, y compris leur intégration sur les toits ou les façades, n’est pas pris en considération, mais des exigences relatives à la documentation fournie avec l’installation et à destination de l’installateur et de l’utilisateur sont indiquées (voir également 4.6).
Les dispositifs externes de chauffage d’appoint pour la production d’eau chaude qui sont placés en série avec l’installation préfabriquée en usine ne sont pas considérés comme faisant partie de l’installation. Les canalisations d’eau froide entre le réseau d’eau froide et l’installation ainsi que les canalisations entre l’installation et le dispositif externe de chauffage d’appoint ou les points de soutirage ne sont pas considérées comme faisant partie de l’installation. Les canalisations entre les composants de l’installation préfabriquée en usine sont considérées comme faisant partie de l’installation. Tout échangeur de chaleur ou canalisation intégré(e), destiné(e) à l’option mode « chauffage des locaux » (voir Introduction, dernier paragraphe) n’est pas considéré(e) comme faisant partie de l’installation.

Toplotni sončni sistemi in sestavni deli - Industrijsko izdelani sistemi - 1. del: Splošne zahteve

Ta evropski standard določa zahteve za trajnost, zanesljivost in varnost industrijsko izdelanih sončnih ogrevalnih sistemov. Standard vključuje tudi določbe za ocenjevanje skladnosti s temi zahtevami.
Zahteve tega standarda se uporabljajo za tovarniško izdelane sončne sisteme kot izdelke. Sama montaža teh sistemov ni obravnavana, vendar so podane zahteve glede dokumentacije za monterja in uporabnika, ki je priložena sistemu (glej tudi 4.6).
Zunanje pomožne naprave za segrevanje vode, ki so nameščene zaporedno v industrijsko izdelanem sistemu, se ne štejejo za del sistema. Cevi za hladno vodo iz omrežja hladne vode do sistema in cevi iz sistema do zunanjega pomožnega grelca ali do izpustnih točk se ne štejejo za del sistema. Cevi med sestavnimi deli industrijsko izdelanega sistema se štejejo za del sistema. Morebitni vgrajeni izmenjevalnik toplote ali cevi za ogrevanje prostora (glej Uvod, Opomba 3) se ne štejejo za del sistema.

General Information

• Status: Withdrawn
• Publication Date: 24-Jan-2017
• Withdrawal Date: 07-Dec-2021
• ICS: 27.160 - Solar energy engineering
• Technical Committee: CEN/TC 312 - Thermal solar systems and components
• Drafting Committee: CEN/TC 312/WG 2 - Factory made systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 08-Dec-2021
• Directive: 811/2013 - Commission Delegated Regulation (EU) No 811/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of space heaters, combination heaters, packages of space heater, temperature control and solar device and packages of combination heater, temperature control and solar device
• Directive: 812/2013 - Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device
• Directive: 813/2013 - Commission Regulation (EU) No 813/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for space heaters and combination heaters
• Directive: 814/2013 - Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water storage tanks
• Mandate: M/534 - [C(2015)2625] Standardisation request to the European standardisation organisations pursuant to Article 10(1) of Regulation (EU) No 1025/2012 of the European Parliament and of the Council in support of implementation of Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water storage tanks and Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device
• Mandate: M/535 - [C(2016)2626) Standardisation request to the European standardisation organisations to draft harmonised European standards pursuant to Article 10(1) of Regulation (EU) No 1025/2012 of the European Parliament and of the Council in support of implementation of Commission Regulation (EU) No 813/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to eco-design requirements for space heaters and combination heaters and Commission Delegated Regulation (EU) No 811/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of space heaters, combination heaters, packages of space heaters, temperature control and solar device and packages of combination heater, temperature control and solar device
• Ref Project: SIST EN 12976-1:2017 - Thermal solar systems and components - Factory made systems - Part 1: General requirements

Relations

• Replaces: EN 12976-1:2006 - Thermal solar systems and components - Factory made systems - Part 1: General requirements
• Effective Date: 01-Feb-2017
• Replaced By: EN 12976-1:2021 - Thermal solar systems and components - Factory made systems - Part 1: General requirements
• Effective Date: 18-Oct-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermische Solaranlagen und ihre Bauteile - Vorgefertigte Anlagen - Teil 1: Allgemeine AnforderungenInstallations solaires thermiques et leurs composants - Installations préfabriquées en usine - Partie 1: Exigences généralesThermal solar systems and components - Factory made systems - Part 1: General requirements27.160Solar energy engineeringICS:Ta slovenski standard je istoveten z:EN 12976-1:2017SIST EN 12976-1:2017en,fr,de01-april-2017SIST EN 12976-1:2017SLOVENSKI
STANDARDSIST EN 12976-1:20061DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12976-1
January
t r s y ICS
t yä s x r Supersedes EN
s t { y xæ sã t r r xEnglish Version
Thermal solar systems and components æ Factory made systems æ Part
sã General requirements Installations solaires thermiques et leurs composants æInstallations préfabriquées en usine æ Partie
s ã Exigences générales
Thermische Solaranlagen und ihre Bauteile æ Vorgefertigte Anlagen æ Teil
sã Allgemeine Anforderungen This European Standard was approved by CEN on
s w April
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t { y xæ sã t r s y ESIST EN 12976-1:2017

Conformity assessment . 20 Annex B (informative)
Material combination with regard to corrosion . 21 Annex C (normative)
System families. 24 C.1 System family, system subtype . 24 C.2 Requirements for grouping different system configurations into one system family. 24 C.3 Testing requirements . 27 C.4 Procedure . 28 C.4.1 General. 28 C.4.2 Evaluation of the validity of the test result. 29 SIST EN 12976-1:2017

Tables Table 1 — Division for factory made and custom built solar heating systems . 6 Table A.1 — Guidelines for repetition of tests in case that components have been changed . 20 Table B.1 — Material/fluid combination for closed systems . 21 Table B.2 — Material/fluid combination for closed systems . 22 Table B.3 — Material combinations for open systems (related to internal surfaces) . 23 Table B.4 — Material combinations for open systems (related to internal surfaces) . 23
Figures Figure C.1 — Principle of method II (DST) . 29
...