EN 9300-003:2012

Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts

This European Standard defines basic terms, e.g. Long Term Archiving and Retention and identifies the context and scope of EN 9300. The section Fundamentals describes the basic concepts and approaches of EN 9300 and referenced related standards.

Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und -Bereitstellung digitaler technischer Produktdokumentationen, wie zum Beispiel von 3D-, CAD- und PDM-Daten - Teil 003: Grundlagen und Konzepte

Diese Europäische Norm definiert Grundbegriffe, z. B. Langzeitarchivierung und Speicherung und legt den Kontext und Anwendungsbereich von EN 9300 fest. Im Abschnitt Grundlagen werden die Grundbegriffe und Herangehensweisen von EN 9300 sowie verwandter Normen beschrieben, auf die verwiesen wird.

Série aérospatiale - LOTAR - Archivage long terme et récupération des données techniques produits numériques, telles que CAD, 3D et PMD - Partie 003: Fondamentaux et concepts

Aeronavtika - LOTAR - Trajno arhiviranje in zagotavljanje digitalne tehnične dokumentacije, kot so 3D, CAD in podatki PDM - 003. del: Osnove in pojmi

General Information

• Status: Published
• Publication Date: 25-Sep-2012
• Withdrawal Date: 30-Mar-2013
• ICS: 01.110 - Technical product documentation
• ICS: 35.240.30 - IT applications in information, documentation and publishing
• ICS: 49.020 - Aircraft and space vehicles in general
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 1 - General
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Sep-2012
• Completion Date: 26-Sep-2012
• Ref Project: SIST EN 9300-003:2014 - Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts

Relations

• Revised: prEN 9300-003 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts
• Effective Date: 17-Jan-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2014
$HURQDYWLND/27$57UDMQRDUKLYLUDQMHLQ]DJRWDYOMDQMHGLJLWDOQHWHKQLþQH
GRNXPHQWDFLMHNRWVR'&$'LQSRGDWNL3'0GHO2VQRYHLQSRMPL
Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product
documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts
Luft- und Raumfahrt - Langzeitarchivierung und Bereitstellung digitaler technischer
Produktdokumentationen beispielsweise 3D CAD und PDM Daten - Teil 003: Grundlagen
und Konzepte
Série aérospatiale - LOTAR - Archivage long terme et récupération des données
techniques produits numériques, telles que CAD D et PMD - Partie 003: Fondamentaux
et concepts
Ta slovenski standard je istoveten z: EN 9300-003:2012
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 9300-003
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2012
ICS 01.110; 35.240.30; 49.020
English Version
Aerospace series - LOTAR - Long term archiving and retrieval of
digital technical product documentation such as 3D, CAD and
PDM data - Part 003: Fundamentals and concepts
Série aérospatiale - LOTAR - Archivage long terme et Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und -
récupération des données techniques produits numériques, Bereitstellung digitaler technischer
telles que CAD D et PMD - Partie 003: Fondamentaux et Produktdokumentationen, wie zum Beispiel von 3D-, CAD-
concepts und PDM-Daten - Teil 003: Grundlagen und Konzepte
This European Standard was approved by CEN on 10 March 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9300-003:2012: E
worldwide for CEN national Members.

Contents Page
Foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviations . 6
4 Major differences of terms . 6
4.1 Introduction . 6
4.1.1 General . 6
4.1.2 Invariance . 6
4.1.3 Objectives for keeping digital data . 6
4.1.4 Length of time of keeping data. 7
4.1.5 Stored Form . 7
4.2 Terminology . 8
4.2.1 General . 8
4.2.2 Product information model . 8
4.2.3 Product model . 9
4.2.4 Business Application . 9
4.2.5 Retention .10
4.2.6 Long Term Archiving .10
4.3 Scope of EN 9300 .11
4.4 Relation to Legal Admissibility Standards .12
5 Applicability.13
6 Overview of referenced standards .13
6.1 General .13
6.2 Introduction to OAIS — ISO 14721 .13
6.2.1 General .13
6.2.2 The OAIS Environment .14
6.2.3 The OAIS model .14
6.3 Introduction to ISO 10303 .15
6.3.1 General .15
6.3.2 ISO 10303-203:1994 and Edition 2 draft, Configuration controlled 3D designs of
mechanical parts and assemblies.17
6.3.3 ISO 10303-214:2001 and ISO 10303-214:2003, Core Data for Automotive Mechanical
Design Processes .17
6.3.4 ISO 10303-233, System engineering data representation .18
6.3.5 ISO 10303-209:2001, Composite and metal structural analysis and related design.18
6.3.6 ISO 10303-237, Computational fluid dynamics .18
6.3.7 ISO 10303-210:2001 and Edition 2 draft, Electronic assembly, interconnect and packaging
design .18
6.3.8 ISO 10303-212:2001, Electro technical design and installation .18
7 Fundamentals and concepts .18
7.1 Overview .18
7.2 Processes .20
7.3 Data .20
7.3.1 Archiving Product Models vs. Archiving Documents .20
7.3.2 Data content .22
7.3.3 Data formats .24
7.3.4 Archiving approach for complex product models .25
7.3.5 Data quality assurance .25
7.3.6 Process phases and cycles . 27
7.4 Mapping approach onto physical data representations . 30
7.5 Fundamentals for testing the LOTAR process and components . 31
7.6 System Architecture Framework . 33
8 Description methods . 33

Foreword
This document (EN 9300-003:2012) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2013, and conflicting national standards shall be withdrawn at
the latest by March 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This standard was prepared jointly by ASD-STAN and the PROSTEP iViP Association.
The PROSTEP iViP Association is an international non-profit association in Europe. For establishing
leadership in IT-based engineering it offers a moderated platform to its nearly 200 members from leading
industries, system vendors and research institutions. Its product and process data standardization activities at
European and worldwide levels are well known and accepted. The PROSTEP iViP Association sees this
standard and the related parts as a milestone of product data technology.
Users should note that all standards undergo revision from time to time and that any reference made herein to
any other standard implies its latest edition, unless otherwise stated.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

1 Scope
This European Standard defines basic terms, e.g. Long Term Archiving and Retention and identifies the
context and scope of EN 9300. The section Fundamentals describes the basic concepts and approaches of
EN 9300 and referenced related standards.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 9103, Aerospace series — Quality management systems — Variation management of key characteristics
*
EN 9300-007 , Aerospace series — LOTAR — Long Term Archiving and Retrieval of digital technical product
1)
documentation such as 3D, CAD and PDM data — Part 007: Terms and references
ISO 10303-203:1994 and Edition 2 draft, Industrial automation systems and integration — Product data
representation and exchange — Part 203: Application protocol: Configuration controlled 3D designs of
mechanical parts and ass
...