EN 573-3:2007

Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products

This European Standard specifies the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with those registered with the Aluminum Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, for the corresponding alloys.

Aluminium und Aluminiumlegierungen - Chemische Zusammensetzung und Form von Halbzeug - Teil 3: Chemische Zusammensetzung und Erzeugnisformen

Diese Europäische Norm legt die Grenzwerte für die chemische Zusammensetzung von Aluminium und Aluminium-Knetlegierungen und die Erzeugnisformen fest.
Die hier festgelegten Grenzwerte für die chemische Zusammensetzung von Aluminium und Aluminiumlegierungen stimmen völlig mit den entsprechenden Legierungen überein, die bei der Aluminum Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, registriert sind.

Aluminium et alliages d'aluminium - Composition chimique et forme des produits corroyés - Partie 3: Composition chimique et forme des produits

Aluminij in aluminijeve zlitine - Kemična sestava in oblika gnetenih izdelkov - 3. del: Kemična sestava in oblika izdelkov

General Information

• Status: Withdrawn
• Publication Date: 14-Aug-2007
• Withdrawal Date: 21-Apr-2009
• ICS: 77.120.10 - Aluminium and aluminium alloys
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 7 - Sheets, strips and plates
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Apr-2009
• Completion Date: 22-Apr-2009
• Ref Project: SIST EN 573-3:2007 - Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products

Relations

• Replaces: EN 573-3:2003 - Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition
• Effective Date: 22-Dec-2008
• Replaces: EN 573-4:2004 - Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products
• Effective Date: 22-Dec-2008
• Replaced By: EN 573-3:2009 - Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 573-3:2007
01-december-2007
1DGRPHãþD
SIST EN 573-3:2004
$OXPLQLMLQDOXPLQLMHYH]OLWLQH.HPLþQDVHVWDYDLQREOLNDJQHWHQLKL]GHONRY
GHO.HPLþQDVHVWDYDLQREOLNDL]GHONRY
Aluminium and aluminium alloys - Chemical composition and form of wrought products -
Part 3: Chemical composition and form of products
Aluminium und Aluminiumlegierungen - Chemische Zusammensetzung und Form von
Halbzeug - Teil 3: Chemische Zusammensetzung und Erzeugnisformen
Aluminium et alliages d'aluminium - Composition chimique et forme des produits
corroyés - Partie 3: Composition chimique et forme des produits
Ta slovenski standard je istoveten z: EN 573-3:2007
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 573-3:2007 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 573-3:2007

---------------------- Page: 2 ----------------------

SIST EN 573-3:2007
EUROPEAN STANDARD
EN 573-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2007
ICS 77.120.10; 77.150.10 Supersedes EN 573-3:2003, EN 573-4:2004
English Version
Aluminium and aluminium alloys - Chemical composition and
form of wrought products - Part 3: Chemical composition and
form of products
Aluminium et alliages d'aluminium - Composition chimique Aluminium und Aluminiumlegierungen - Chemische
et forme des produits corroyés - Partie 3: Composition Zusammensetzung und Form von Halbzeug - Teil 3:
chimique et forme des produits Chemische Zusammensetzung und Erzeugnisformen
This European Standard was approved by CEN on 11 July 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 573-3:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 573-3:2007
EN 573-3:2007 (E)
Contents Page
Foreword.3
1 Scope.5
2 Normative references.5
3 Chemical composition limits.5
4 Writing rules.5
5 Alloy designations.6
6 Sequence of elements.6
7 Rounding rules for determination of compliance .6
Annex A (normative) Form of products .21
A.1 Forms of products .21
A.2 Lists of EN Standards .21
Annex B (normative) Guidelines for the introduction of new wrought aluminium and wrought
aluminium alloys in CEN/TC 132 standards.
...