EN 13256:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures

This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in the construction of tunnels and underground structures, and the appropriate test methods to determine these characteristics.
The intended use of these geotextiles or geotextile-related products is to protect geosynthetic barriers used in tunnels and underground structures.
This European Standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318.
This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures.
NOTE   Particular application cases may contain requirements regarding additional properties and – preferably standardised – test methods, if they are technically relevant.
This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in EN 1997 1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.

Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung im Tunnelbau und in Tiefbauwerken

Diese Europäische Norm legt die wichtigsten Eigenschaften von Geotextilien und geotextilverwandten Produkten, die im Tunnelbau und in Tiefbauwerken verwendet werden, sowie die geeigneten Prüfverfahren zur Bestimmung dieser Eigenschaften fest.
Die vorgesehene Anwendung dieser im Tunnelbau und in Tiefbauwerken verwendeten Geotextilien und geotextilverwandten Produkte ist das Schützen von geosynthetischen Dichtungsbahnen.
Diese Europäische Norm ist nicht auf geosynthetische Dichtungsbahnen anwendbar, wie in EN ISO 10318 festgelegt.
Diese Europäische Norm behandelt die Bewertung und Überprüfung der Leistungsbeständigkeit des Produkts nach dieser Europäischen Norm und die werkseigene Produktionskontrolle.
ANMERKUNG   Besondere Anwendungen können Anforderungen hinsichtlich zusätzlicher Eigenschaften und – vorzugsweise genormte – Prüfverfahren enthalten, wenn diese technisch relevant sind.
Diese Europäische Norm darf zur Festlegung von Bemessungswerten herangezogen werden, in dem die im Zusammenhang mit den in EN 1997-1 (Eurocode 7) angegebenen Definitionen, z. B. Sicherheitsbeiwerte, berücksichtigt werden. Für das Produkt sollte die vorgesehene Nutzungsdauer festgelegt werden, weil seine Funktion zeitlich befristet sein darf, als Einbauhilfe oder dauerhaft, weil sie der Nutzungsdauer des Bauwerks entspricht.

Géotextiles et produits apparentés - Caractéristiques requises pour l’utilisation dans la construction de tunnels et de structures souterraines

La présente Norme européenne spécifie les caractéristiques pertinentes des géotextiles et produits apparentés utilisés dans la construction des tunnels et des structures souterraines ainsi que les méthodes d’essai appropriées pour déterminer ces caractéristiques.
L’application de ces géotextiles ou produits apparentés est de protéger les géomembranes et/ou géosynthétiques bentonitiques utilisés dans les tunnels et les structures souterraines.
La présente norme ne s’applique pas aux géomembranes et géosynthétiques bentonitiques tels que définis dans l'EN ISO 10318.
La présente norme permet d’évaluer la conformité et la constance de performance du produit à la présente norme européenne et les procédures de contrôle de la production en usine.
Cette norme définit les exigences concernant la présentation des propriétés des produits à satisfaire par les producteurs et les distributeurs.
Des cas d’application particuliers ou des spécifications nationales peuvent contenir des exigences sur des propriétés supplémentaires et méthodes d’essais - si possible normalisées - si elles sont techniquement pertinentes et ne La présente norme européenne peut être utilisée pour déduire les valeurs de calcul en prenant en compte les facteurs définis dans l’ EN 1997-1( Eurocode 7), par exemple les facteurs de sécurité. Il convient de déterminer la durée de vie prévue du produit, puisque sa fonction peut être provisoire, pour des besoins de construction, ou permanente, pour la durée de vie de la structure.

Geotekstilije in geotekstilijam sorodni izdelki - Značilnosti, ki se zahtevajo pri gradnji tunelov in podzemeljskih delov

Ta evropski standard določa pomembne značilnosti geotekstilij in geotekstilijam sorodnih izdelkov, ki se uporabljajo pri gradnji tunelov in podzemeljskih delov, ter ustrezne preskusne metode za določitev teh značilnosti. Te geotekstilije in geotekstilijam sorodni izdelki naj bi se uporabljali za zaščito geosintetičnih zapor, ki se uporabljajo pri tunelih in podzemeljskih delih. Ta standard ne velja za geosintetične zapore, kakor so opredeljene v standardu EN ISO 10318. Ta standard omogoča ocenjevanje in preverjanje stalnosti delovanja izdelka v skladu s tem evropskim standardom ter postopke kontrole proizvodnje v obratu.

General Information

• Status: Withdrawn
• Publication Date: 10-Feb-2015
• Withdrawal Date: 11-Oct-2016
• ICS: 59.080.70 - Geotextiles
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189/WG 1 - ad hoc group Asphalt reinforcement
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 12-Oct-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/107 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on geotextiles
• Mandate: M/386 - AMENDMENT TO: Mandate M/107 to CEN/CENELEC concerning the execution of standardisation work for Harmonized standards on Geotextiles
• Ref Project: SIST EN 13256:2014+A1:2015 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures

Relations

• Merged From: EN 13256:2014 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
• Effective Date: 18-Jan-2023
• Merged From: EN 13256:2014/FprA1 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
• Effective Date: 05-Dec-2014
• Replaced By: EN 13256:2016 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung im Tunnelbau und in TiefbauwerkenGéotextiles et produits apparentés - Caractéristiques requises pour l’utilisation dans la construction de tunnels et de structures souterrainesGeotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures93.060Gradnja predorovTunnel construction93.020Zemeljska dela. Izkopavanja. Gradnja temeljev. Dela pod zemljoEarthworks. Excavations. Foundation construction. Underground works59.080.70GeotekstilijeGeotextilesICS:Ta slovenski standard je istoveten z:EN 13256:2014+A1:2015SIST EN 13256:2014+A1:2015en,fr,de01-april-2015SIST EN 13256:2014+A1:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13256:2014+A1
February 2015 ICS 59.080.70 Supersedes EN 13256:2014English Version
Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans la construction de tunnels et de structures souterraines
Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung im Tunnelbau und in Tiefbauwerken This European Standard was approved by CEN on 9 November 2013 and includes Amendment 1 approved by CEN on 13 December 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13256:2014+A1:2015 ESIST EN 13256:2014+A1:2015

Factory production control . 14 A.1 Factory production control scheme . 14 A.1.1 General . 14 A.1.2 Product design . 14 A.1.3 Production . 14 A.1.4 Finished products . 14 A.1.5 Provisions applicable to A.1.2, A.1.3 and A.1.4 (to be used where appropriate) . 15 A.2 Assessment of a factory production control (FPC) system . 16 A.2.1 General . 16 A.2.2 Checklist . 16 A.2.3 Test frequency . 20 Annex B (normative)
!Durability aspects" . 21 B.1 General . 21 B.1.1 Service life . 21 B.1.2 Initial and repeat testing of durability . 21 B.1.3 Use of rework material . 22 SIST EN 13256:2014+A1:2015

Guidelines for the selection of the appropriate standard in a specific application . 27 Annex D (informative)
Significant technical changes to the superseded standard . 29 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 30 ZA.1 Scope and relevant characteristics . 30 ZA.2 Procedure for AVCP of Geotextiles and geotextiles-related products for the use in the construction of tunnels and underground structures . 31 ZA.2.1 Systems of AVCP . 31 ZA.2.2 Declaration of performance (DoP) . 33 ZA.3 CE marking and labelling . 36 Bibliography . 39
...