iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13083:2008/FprA1

(Amendment)

Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading

Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading

The subject of this amendment shall be the deletion of 5.14 dealing with the cap.

Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VK-Kupplung für Untenbefüllung und -entladung

Citernes de transport de matières dangereuses - Équipement de service pour citernes - Adaptateur pour le chargement et le déchargement par le bas

Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Spojka za polnjenje in praznjenje z dna - Dopolnilo A1

General Information

Status
Not Published
ICS
13.300 - Protection against dangerous goods
23.020.20 - Vessels and containers mounted on vehicles
23.040.60 - Flanges, couplings and joints
Technical Committee
CEN/TC 296 - Tanks for transport of dangerous goods
Drafting Committee
CEN/TC 296/WG 7 - Service equipment (including equipment for vapour recovery, bottom loading, the confinement and handling of petroleum products)
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
30-Jan-2013
Due Date
16-Aug-2013
Completion Date
30-Jan-2013
Directive
2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
Mandate
M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
Ref Project
SIST EN 13083:2009/kFprA1:2012 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading

Relations

Merged Into
EN 13083:2008+A1:2013 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
Effective Date
13-Feb-2013
Amends
EN 13083:2008 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
Effective Date
07-Dec-2011

Buy Standard

EN 13083:2009/kFprA1:2012EN 13083:2009/kFprA1:2012
PreviousNext
Draft
EN 13083:2009/kFprA1:2012
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13083:2009/kFprA1:2012
01-oktober-2012
Posode za prevoz nevarnega blaga - Oprema za oskrbovanje posod - Spojka za
polnjenje in praznjenje z dna - Dopolnilo A1
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for
bottom loading and unloading
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VK-
Kupplung für Untenbefüllung und -entladung
Citernes de transport de matières dangereuses - Équipement de service pour citernes -
Adaptateur pour le chargement et le déchargement par le bas
Ta slovenski standard je istoveten z: EN 13083:2008/FprA1
ICS:
13.300 Varstvo pred nevarnimi Protection against dangerous
izdelki goods
23.020.20 Posode in vsebniki, montirani Vessels and containers
na vozila mounted on vehicles
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
SIST EN 13083:2009/kFprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13083:2009/kFprA1:2012

---------------------- Page: 2 ----------------------

SIST EN 13083:2009/kFprA1:2012


EUROPEAN STANDARD
FINAL DRAFT
EN 13083:2008
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
August 2012
ICS 13.300; 23.020.20; 23.040.60
English Version
Tanks for transport of dangerous goods - Service equipment for
tanks - Adaptor for bottom loading and unloading
Citernes de transport de matières dangereuses - Tanks für die Beförderung gefährlicher Güter -
Équipement de service pour citernes - Adaptateur pour le Bedienungsausrüstung von Tanks - VK-Kupplung für
chargement et le déchargement par le bas Untenbefüllung und -entladung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 296.

This draft amendment A1, if approved, will modify the European Standard EN 13083:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN Al
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13083:2008+A1:2013(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
SIST EN 13083:2009+A1:2013

This European Standard covers externally actuated and self actuated adaptors for bottom loading and unloading.
This European Standard specifies the performance requirements and the critical dimensions of the adaptor for bottom loading and unloading. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no subclassification as toxic or corrosive.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13081:2008+A1:2012(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
SIST EN 13081:2009+A1:2012

This European Standard covers the vapour collection adaptor and coupler used to achieve a vapour tight path between the transport tank and the stationary loading and unloading facilities.
This European Standard specifies the performance requirements and the critical dimensions of the vapour recovery adaptor fitted to the tank and the mating coupler fitted to a hose or to pipework connected to the stationary loading and unloading facilities. It also specifies the tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa, at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13081:2008/FprA1(Amendment)
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
SIST EN 13081:2009/kFprA1:2011
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13083:2008+A1:2013(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
SIST EN 13083:2009+A1:2013

This European Standard covers externally actuated and self actuated adaptors for bottom loading and unloading.
This European Standard specifies the performance requirements and the critical dimensions of the adaptor for bottom loading and unloading. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no subclassification as toxic or corrosive.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13081:2008+A1:2012(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
SIST EN 13081:2009+A1:2012

This European Standard covers the vapour collection adaptor and coupler used to achieve a vapour tight path between the transport tank and the stationary loading and unloading facilities.
This European Standard specifies the performance requirements and the critical dimensions of the vapour recovery adaptor fitted to the tank and the mating coupler fitted to a hose or to pipework connected to the stationary loading and unloading facilities. It also specifies the tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa, at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13081:2008/FprA1(Amendment)
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
SIST EN 13081:2009/kFprA1:2011
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day