EN ISO 6506-3:2005

Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2005)

ISO 6506-3:2005 specifies a method for the calibration of reference blocks to be used for use in the indirect verification of Brinell hardness testing machines as described in ISO 6506-2.

Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 3: Kalibrierung von Härtevergleichsplatten (ISO 6506-3:2005)

In diesem Teil von ISO 6506 ist das Verfahren für die Kalibrierung von Härtevergleichsplatten, die bei der indirekten Prüfung von Härteprüfmaschinen nach Brinell nach ISO 6506-2 verwendet werden, festgelegt.

Matériaux métalliques - Essai de dureté Brinell - Partie 3: Etalonnage des blocs de référence (ISO 6506-3:2005)

L'ISO 6506-3:2005 spécifie une méthode pour l'étalonnage des blocs de référence à utiliser pour la vérification indirecte des machines d'essai de dureté Brinell, comme décrit dans l'ISO 6506-2.

Kovinski materiali – Preskus trdote po Brinellu – 3. del: Umerjanje primerjalnih ploščic (ISO 6506-3:2005)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2005
• Withdrawal Date: 23-Sep-2014
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 1 - Steel - Mechanical testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 24-Sep-2014
• Ref Project: SIST EN ISO 6506-3:2006 - Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2005)

Relations

• Replaces: EN ISO 6506-3:1999 - Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:1999)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 6506-3:2014 - Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014)
• Effective Date: 27-Aug-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6506-3:2006
01-marec-2006
1DGRPHãþD
SIST EN ISO 6506-3:2001
.RYLQVNLPDWHULDOL±3UHVNXVWUGRWHSR%ULQHOOX±GHO8PHUMDQMHSULPHUMDOQLK
SORãþLF,62
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO
6506-3:2005)
Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 3: Kalibrierung von
Härtevergleichsplatten (ISO 6506-3:2005)
Matériaux métalliques - Essai de dureté Brinell - Partie 3: Etalonnage des blocs de
référence (ISO 6506-3:2005)
Ta slovenski standard je istoveten z: EN ISO 6506-3:2005
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 6506-3:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 6506-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 77.040.10 Supersedes EN ISO 6506-3:1999
English Version
Metallic materials - Brinell hardness test - Part 3: Calibration of
reference blocks (ISO 6506-3:2005)
Matériaux métalliques - Essai de dureté Brinell - Partie 3: Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 3:
Etalonnage des blocs de référence (ISO 6506-3:2005) Kalibrierung von Härtevergleichsplatten (ISO 6506-3:2005)
This European Standard was approved by CEN on 14 December 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6506-3:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 6506-3:2005 (E)





Foreword


This document (EN ISO 6506-3:2005) has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals" in collaboration with Technical Committee ECISS/TC 1 "Steel -
Mechanical testing", the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2006, and conflicting national
standards shall be withdrawn at the latest by June 2006.

This document supersedes EN ISO 6506-3:1999.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 6506-3:2005 has been approved by CEN as EN ISO 6506-3:2005 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 6506-3
Second edition
2005-12-15


Metallic materials — Brinell hardness
test —
Part 3:
Calibration of reference blocks
Matériaux métalliques — Essai de dureté Brinell —
Partie 3: Étalonnage des blocs de référence




Reference number
ISO 6506-3:2005(E)
©
ISO 2005

---------------------- Page: 4 ----------------------

ISO 6506-3:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
param
...