EN 17618:2021
(Main)Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading
Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading
This document specifies a method for adhesives for wood and derived solid wood products for determining the shear strength and wood failure percentage of wood-to-wood adhesive bonds loaded in compression. These parameters allow to define different working properties of adhesives (e.g. final bond strength, pressing time, closed assembly time).
Annex A gives information required prior to testing.
Klebstoffe - Holz-auf-Holz-Klebverbindungen für nicht tragende Anwendungen - Bestimmung der Scherfestigkeit durch Druckbelastung
Dieses Dokument legt ein Verfahren für Klebstoffe für Holz und Vollholzprodukte zur Bestimmung der Scherfestigkeit und des Holzbruchanteils von druckbelasteten Holz-auf-Holz-Klebverbindungen fest. Mithilfe dieser Kennwerte können verschiedene Gebrauchseigenschaften von Klebstoffen festgelegt werden (z. B. endgültige Klebfestigkeit, Presszeit, geschlossene Wartezeit).
Anhang A enthält vor der Prüfung erforderliche Informationen.
Adhésifs - Joints collés de bois à bois à usages non structuraux - Détermination de la résistance au cisaillement par effort de compression
Le présent document spécifie une méthode applicable aux colles pour bois et pour matériaux dérivés du bois massif, permettant de déterminer la résistance au cisaillement et le pourcentage de rupture dans le bois des joints collés de bois à bois soumis à un effort de compression. Ces paramètres permettent de définir différentes propriétés de mise en oeuvre des colles, notamment la résistance définitive à la rupture des joints, le temps de pressage, le temps d'assemblage fermé.
L'Annexe A indique les informations requises avant l'essai.
Lepila - Lepila za les za nekonstrukcijsko uporabo - Ugotavljanje strižne trdnosti s tlačno obremenitvijo
Ta dokument določa metodo za lepila za les in izdelke iz masivnega lesa za ugotavljanje strižne trdnosti in odstotka loma po lesu lepil za les s tlačno obremenitvijo. S temi parametri je mogoče določiti različne delovne lastnosti lepil (npr. končno sprijemno trdnost, čas stiskanja, zaprti čas montaže).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17618:2022
01-januar-2022
Lepila - Lepila za les za nekonstrukcijsko uporabo - Ugotavljanje strižne trdnosti s
tlačno obremenitvijo
Adhesives - Wood-to-wood adhesive bonds for non-structural applications -
Determination of shear strength by compressive loading
Klebstoffe - Holz-auf-Holz-Klebverbindungen für nicht tragende Anwendungen -
Bestimmung der Scherfestigkeit durch Druckbelastung
Adhésifs - Joints collés de bois à bois à usages non structuraux - Détermination de la
résistance au cisaillement par effort de compression
Ta slovenski standard je istoveten z: EN 17618:2021
ICS:
83.180 Lepila Adhesives
SIST EN 17618:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17618:2022
---------------------- Page: 2 ----------------------
SIST EN 17618:2022
EN 17618
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2021
EUROPÄISCHE NORM
ICS 83.180
English Version
Adhesives - Wood-to-wood adhesive bonds for non-
structural applications - Determination of shear strength
by compressive loading
Adhésifs - Joints collés de bois à bois à usages non Klebstoffe - Holz-auf-Holz-Klebverbindungen für nicht
structuraux - Détermination de la résistance au tragende Anwendungen - Bestimmung der
cisaillement par effort de compression Scherfestigkeit durch Druckbelastung
This European Standard was approved by CEN on 3 October 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17618:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17618:2022
EN 17618:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 6
5 Safety . 6
6 Apparatus . 6
6.1 Linear measuring device . 6
6.2 Testing machine . 6
7 Procedure. 7
7.1 Preparation of bonded assemblies .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.