Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B

This document specifies:
a)   field of application;
b)   requirements for pressurised air inlet valves;
c)   dimensional and the physico-chemical properties and the properties of general hydraulic, mechanical and acoustic design of pressurised air inlet valves DN 15 to DN 50;
d)   test procedure and requirements for verifying these properties;
e)   marking and presentation;
f)   acoustics.
This document specifies the characteristics of pressurised air inlet valves DN 15 to DN 50 that are suitable for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C.

Sicherungseinrichtungen zum Schutz des Trinkwassers gegen Verschmutzung durch Rückfließen - Druckbeaufschlagte Rohrbelüfter in Durchflussform DN 15 bis DN 50 - Familie L, Typ A und Typ B

Dieses Dokument legt Folgendes fest:
a)   Anwendungsbereich;
b)   Anforderungen an druckbeaufschlagte Rohrbelüfter;
c)   maßliche, physikalisch-chemische Eigenschaften und Eigenschaften allgemeiner hydraulischer, mechanischer und akustischer Art von druckbeaufschlagten Rohrbelüftern DN 15 bis DN 50;
d)   Prüfverfahren und Anforderungen, um diese Eigenschaften nachzuweisen;
e)   Kennzeichnung;
f)   Geräuschverhalten.
Diese Norm legt die Eigenschaften von druckbeaufschlagten Rohrbelüftern in den Nennweiten DN 15 bis DN 50 fest, die für den Gebrauch in Trinkwassersystemen bei Drücken bis 1  MPa (10 bar) und Temperaturen bis 65 °C und für 1 h bei 90 °C geeignet sind.

Dispositifs de protection contre la pollution de l'eau potable par retour - Clapet d'entrée d'air sous pression DN 15 à DN 50 - Famille L, type A et type B

La présente Norme européenne spécifie :
¾ le domaine d'application ;
¾ les exigences pour les clapets d'entrée d'air sous pression avec corps non plastifiés ;
¾ les caractéristiques dimensionnelles, physico-chimiques, de conception, hydrauliques, mécaniques et acoustiques de clapet d'entrée d'air sous pression DN 15 et DN 50 inclus ;
¾ la famille L, type A ;
¾ la famille L, type B ;
¾ la méthode d'essai et les exigences pour vérifier leurs caractéristiques. Pour les dispositifs combinés ) seul les essais antipollution sont à effectuer ;
¾ le marquage et la présentation à la livraison ;
¾ les caractéristiques acoustiques.
¾ la présente norme spécifie les caractéristiques de clapets d'entrée d'air sous pression de diamètre nominal DN 15 jusqu'à y compris DN 50 qui sont appropriés pour l'utilisation dans des réseaux d'eau potable à des pressions jusqu'à y compris 1 000 kPa (10 bar) et des températures jusqu'à y compris 65 °C et durant 1 h à 90 °C.

Naprave za varovanje pred onesnaženjem pitne vode zaradi povratnega toka - Tlačni zračniki s premerom DN 15 do DN 50 – Družina L, tipa A in B

General Information

Status
Published
Publication Date
17-May-2005
Withdrawal Date
29-Nov-2005
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
08-Jul-2020

Buy Standard

Standard
EN 14455:2005
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.%Sicherungseinrichtungen zum Schutz des Trinkwassers gegen Verschmutzung durch Rückfließen - Druckbeaufschlagte Rohrbelüfter in Durchflussform DN 15 bis DN 50 - Familie L, Typ A und Typ BDispositifs de protection contre la pollution de l'eau potable par retour - Clapet d'entrée d'air sous pression DN 15 a DN 50 - Famille L, type A et type BDevices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B91.140.60Sistemi za oskrbo z vodoWater supply systems23.060.01Ventili na splošnoValves in general13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 14455:2005SIST EN 14455:2005en01-september-2005SIST EN 14455:2005SLOVENSKI
STANDARD



SIST EN 14455:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14455May 2005ICS 13.060.20; 23.060.01English versionDevices to prevent pollution by backflow of potable water -Presssurised air inlet valves DN 15 to DN 50 - Family L, type Aand type BDispositifs de protection contre la pollution de l'eau potablepar retour - Clapet d'entrée d'air sous pression DN 15 à DN50 - Famille L, type A et type BSicherungseinrichtungen zum Schutz des Trinkwassersgegen Verschmutzung durch Rückfließen -Druckbeaufschlagte Rohrbelüfter in Durchflussform DN 15bis DN 50 - Familie L, Typ A und Typ BThis European Standard was approved by CEN on 24 December 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14455:2005: ESIST EN 14455:2005



EN 14455:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.6 4 Nominal size.6 5 Designation.6 6 Marking and technical documents.7 7 Symbolisation.7 8 General design characteristics.9 9 Physico-chemical characteristics.10 10 Characteristics and tests.11 11 Acoustic characteristics.20 Annex A (normative) Sampling and test sequence.22
SIST EN 14455:2005



EN 14455:2005 (E) 3 Foreword This document (EN 14455:2005) has been prep
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.