iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13076:2003

(Main)

Devices to prevent pollution by backflow of potable water - Unrestricted air gap-Family A - Type A

Devices to prevent pollution by backflow of potable water - Unrestricted air gap-Family A - Type A

This CEN standard specifies the characteristics of type AA air gaps for inlet or feed pipes. Air gaps that comply with the requirements of this standard are devices for protection of drinking water installations from pollution. In addition to factory assembled products this standard includes requirements for site constructed air gaps. This is a performance standard for "AA" air gaps. Materials of construction must be fit for the purpose and application to ensure compliance with this standard during normal working use.

Sicherungseinrichtungen zum Schutz des Trinkwassers gegen Verschmutzung durch Rückfließen - Ungehinderter freier Auslauf-Familie A - Typ A, Freie Ausläufe Typ AA

Diese Europäische Norm legt die Anforderungen an freie Ausläufe Typ AA für Zuleitungsrohre fest. Freie Ausläufe, die Anforderungen dieser Norm erfüllen, sind Einrichtungen zum Schutz von Trinkwasser-Installationen gegen Verunreinigungen. Zusätzlich zu Anforderungen an fabrikmäßig montierte Bauteile enthält diese Norm Anforderungen an vor Ort eingebaute freie Ausläufe. Dies ist eine Gebrauchtauglichkeitsnorm für freie Ausläufe Typ AA.

Dispositifs de protection contre la pollution de l'eau potable par retour - Surverse totale - Famille A, type A

La présente Norme européenne spécifie les caractéristiques et les exigences des surverses totales Famille A Type A destinées à la protection contre la pollution des installations d'eau potable.
La présente norme s'applique aux surverses assemblées en usine et aux surverses réalisées sur site, et définit les caractéristiques physico-chimiques des matériaux de construction convenant à l'usage prévu afin d'assurer la conformité à la norme dans des conditions d'exploitation normales.

Naprave za varovanje pred onesnaženjem pitne vode zaradi povratnega toka - Neoviran prosti iztok - Družina A - Tip A

General Information

Status
Published
Publication Date
11-Mar-2003
ICS
13.060.20 - Drinking water
23.060.01 - Valves in general
Technical Committee
CEN/TC 164 - Water supply
Drafting Committee
CEN/TC 164/WG 14 - Valves and fitting for buildings and devices to prevent pollution by backflow
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
08-Jul-2020
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 13076:2003 - Devices to prevent pollution by backflow of potable water - Unrestricted air gap-Family A - Type A

Buy Standard

EN 13076:2003EN 13076:2003
PreviousNext
Standard
EN 13076:2003
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Naprave za varovanje pred onesnaženjem pitne vode zaradi povratnega toka - Neoviran prosti iztok - Družina A - Tip ASicherungseinrichtungen zum Schutz des Trinkwassers gegen Verschmutzung durch Rückfließen - Ungehinderter freier Auslauf-Familie A - Typ A, Freie Ausläufe Typ AADispositifs de protection contre la pollution de l'eau potable par retour - Surverse totale - Famille A, type ADevices to prevent pollution by backflow of potable water - Unrestricted air gap-Family A - Type A91.140.60Sistemi za oskrbo z vodoWater supply systems23.060.01Ventili na splošnoValves in general13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 13076:2003SIST EN 13076:2003en01-oktober-2003SIST EN 13076:2003SLOVENSKI
STANDARD



SIST EN 13076:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13076March 2003ICS 13.060.20; 23.060.01English versionDevices to prevent pollution by backflow of potable water -Unrestricted air gap-Family A - Type ADispositifs de protection contre la pollution de l'eaupotabble par retour - Surverse totale-Famille A - Type ASicherungseinrichtungen zum Schutz des Trinkwassersgegen Verschmutzung durch Rückfließen - Ungehinderterfreier Auslauf-Familie A - Typ A, Freie Ausläufe Typ AAThis European Standard was approved by CEN on 28 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13076:2003 ESIST EN 13076:2003



EN 13076:2003 (E)2ContentspageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Designation.65Symbolization.66Materials.67Requirements.77.1General.77.2Water inlet device.77.3Air gap (distance 'A').98Marking (not required for site constructed products).109Technical documents.10SIST EN 13076:2003



EN 13076:2003 (E)3ForewordThis document (EN 13076:2003) has been prepared by Technical Co
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15096:2020(Main)
Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification
SIST EN 15096:2020

This document specifies:
a)   the field of application;
b)   the requirements of hose union anti vacuum valves;
c)   dimensional and physio-chemical properties, and properties of general hydraulic, mechanical and acoustic design of hose union anti-vacuum valves of nominal sizes DN 15 up to and including DN 25;
d)   marking and technical product information.
This document specifies the characteristics of hose union anti-vacuum valves of nominal size DN 15 up to and including DN 25 that are suitable for use in drinking water systems at pressures up to and including 1 MPa (10 bar) and temperatures up to and including 65 °C and for 1 h at 90 °C.
HB protects against back siphonage only and is installed in vertical downward flow position.
HD protects against back flow and is installed in vertical downward flow position.
HB and HD anti-vacuum valves are for installation exclusively at the connecting point between stop valve and hose in vertical downward flow position.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14455:2005(Main)
Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B
SIST EN 14455:2005

This document specifies:
a)   field of application;
b)   requirements for pressurised air inlet valves;
c)   dimensional and the physico-chemical properties and the properties of general hydraulic, mechanical and acoustic design of pressurised air inlet valves DN 15 to DN 50;
d)   test procedure and requirements for verifying these properties;
e)   marking and presentation;
f)   acoustics.
This document specifies the characteristics of pressurised air inlet valves DN 15 to DN 50 that are suitable for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14506:2005(Main)
Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
SIST EN 14506:2005

This document specifies:
a)   field of application;
b)   requirements for automatic diverters;
c)   dimensional and the physico chemical properties and the properties of general hydraulic, mechanical and acoustic design of automatic diverters;
d)   test method and requirements for verifying these properties. For sanitary tapware (see Clause 2) with integrated devices, the automatic diverter is only considered to be a backflow protection device if it has passed the requirements of this document and additionally those of the applicable product standard for the draw off tap or mixing valve;
e)   marking and presentation;
f)   acoustics.
This document specifies the characteristics of automatic diverters suitable for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C. They are intended only for installation with no downstream closing device.
This document is applicable to the product type indicated as follows:
i)   integrated in spout (outlet);
ii)   integrated in the mixing body;
iii)   non-integrated (part of a set) above the maximum water level.
This document is not applicable to the product type non-integrated below the maximum water level.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14454:2005(Main)
Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A
SIST EN 14454:2005

This document specifies:
a)   field of application;
b)   requirements for hose union backflow preventer;
c)   dimensional and the physico-chemical properties and the properties of general hydraulic, mechanical and acoustic design of hose union backflow preventers DN 15  to DN 32;
d)   test method and requirements for verifying these properties;
e)   marking and presentation;
f)   acoustics.
This document specifies the characteristics of hose union backflow preventers DN 15 to DN 32 that are suit-able for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1717(Main)
Protection against pollution of water intended for human consumption in potable water installations and general requirements for devices to prevent pollution by backflow
oSIST prEN 1717:2023

This document specifies a methodology for protecting potable water in potable water installations within and outside buildings but within premises from the risk of pollution by backflow of non-potable water and gives recommendations on the design, risk analysis, backflow prevention devices and their installation methods.
This methodology is also intended to be used outside premises for all potable water systems connected to a potable water distribution system up to and including the point of use.
The product standards for the specific backflow prevention devices or arrangements are intended to be used in conjunction with this document. In the absence of a product standard, this document is intended to be used as a reference to draw up a specification for the development of new devices or arrangements.

  • Draft
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15096:2020(Main)
Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification
SIST EN 15096:2020

This document specifies:
a)   the field of application;
b)   the requirements of hose union anti vacuum valves;
c)   dimensional and physio-chemical properties, and properties of general hydraulic, mechanical and acoustic design of hose union anti-vacuum valves of nominal sizes DN 15 up to and including DN 25;
d)   marking and technical product information.
This document specifies the characteristics of hose union anti-vacuum valves of nominal size DN 15 up to and including DN 25 that are suitable for use in drinking water systems at pressures up to and including 1 MPa (10 bar) and temperatures up to and including 65 °C and for 1 h at 90 °C.
HB protects against back siphonage only and is installed in vertical downward flow position.
HD protects against back flow and is installed in vertical downward flow position.
HB and HD anti-vacuum valves are for installation exclusively at the connecting point between stop valve and hose in vertical downward flow position.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14455:2005(Main)
Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B
SIST EN 14455:2005

This document specifies:
a)   field of application;
b)   requirements for pressurised air inlet valves;
c)   dimensional and the physico-chemical properties and the properties of general hydraulic, mechanical and acoustic design of pressurised air inlet valves DN 15 to DN 50;
d)   test procedure and requirements for verifying these properties;
e)   marking and presentation;
f)   acoustics.
This document specifies the characteristics of pressurised air inlet valves DN 15 to DN 50 that are suitable for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14506:2005(Main)
Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
SIST EN 14506:2005

This document specifies:
a)   field of application;
b)   requirements for automatic diverters;
c)   dimensional and the physico chemical properties and the properties of general hydraulic, mechanical and acoustic design of automatic diverters;
d)   test method and requirements for verifying these properties. For sanitary tapware (see Clause 2) with integrated devices, the automatic diverter is only considered to be a backflow protection device if it has passed the requirements of this document and additionally those of the applicable product standard for the draw off tap or mixing valve;
e)   marking and presentation;
f)   acoustics.
This document specifies the characteristics of automatic diverters suitable for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C. They are intended only for installation with no downstream closing device.
This document is applicable to the product type indicated as follows:
i)   integrated in spout (outlet);
ii)   integrated in the mixing body;
iii)   non-integrated (part of a set) above the maximum water level.
This document is not applicable to the product type non-integrated below the maximum water level.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14454:2005(Main)
Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A
SIST EN 14454:2005

This document specifies:
a)   field of application;
b)   requirements for hose union backflow preventer;
c)   dimensional and the physico-chemical properties and the properties of general hydraulic, mechanical and acoustic design of hose union backflow preventers DN 15  to DN 32;
d)   test method and requirements for verifying these properties;
e)   marking and presentation;
f)   acoustics.
This document specifies the characteristics of hose union backflow preventers DN 15 to DN 32 that are suit-able for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1717(Main)
Protection against pollution of water intended for human consumption in potable water installations and general requirements for devices to prevent pollution by backflow
oSIST prEN 1717:2023

This document specifies a methodology for protecting potable water in potable water installations within and outside buildings but within premises from the risk of pollution by backflow of non-potable water and gives recommendations on the design, risk analysis, backflow prevention devices and their installation methods.
This methodology is also intended to be used outside premises for all potable water systems connected to a potable water distribution system up to and including the point of use.
The product standards for the specific backflow prevention devices or arrangements are intended to be used in conjunction with this document. In the absence of a product standard, this document is intended to be used as a reference to draw up a specification for the development of new devices or arrangements.

  • Draft
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day