EN ISO 14114:2018

Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017)

ISO 14114:2017 applies to acetylene cylinder manifold systems extending from the cylinder valve or the bundle outlet connections to the outlet connection of the main shut-off valve. It specifies requirements for design, materials and testing of cylinder manifold systems for the supply of acetylene for use in welding, cutting and allied processes.
ISO 14114:2017 applies to acetylene cylinder manifold systems in which acetylene single cylinders or acetylene bundles are coupled for collective gas withdrawal.
NOTE       National regulations exist regarding limitation of the amount of single cylinders/bundles of acetylene on a single location (e.g. in warehouse or connected to a manifold system).
ISO 14114:2017 also covers a test procedure for decomposition blockers.

Gasschweißgeräte - Acetylenflaschen-Batterieanlagen für Schweißen, Schneiden und verwandte Verfahren - Allgemeine Anforderungen (ISO 14114:2017)

Diese Norm gilt für Acetylenflaschen-Batterieanlagen, die sich vom Flaschenventil- oder Bündelausgang bis zum Anschluss ausgangsseitig des Hauptabsperrventils erstrecken. Sie legt Anforderungen an Ausführung, Werkstoffe und Prüfungen von Flaschen-Batterieanlagen für die Versorgung mit Acetylen für Schweißen, Schneiden und verwandte Verfahren fest.
Diese Norm gilt für Acetylenflaschen-Batterieanlagen, in denen Acetyleneinzelflaschen oder Acetylenflaschenbündel zur gemeinsamen Gasentnahme zusammengeschlossen sind.
ANMERKUNG 1   Bezüglich der Begrenzung der Anzahl von Acetyleneinzelflaschen/-flaschenbündeln an einem Standort (z. B. in einem Lager oder an eine Batterieanlage angeschlossen) sind die nationalen Regelungen zu beachten.
ANMERKUNG 2   Zusätzlich sollten Anforderungen an die elektrischen/elektronischen Komponenten berücksichtigt werden, obwohl diese nicht in dieser Norm behandelt werden.
Diese Norm beinhaltet auch ein Verfahren zur Prüfung der Zerfallsperren.

Matériel de soudage aux gaz - Centrales de détente pour la distribution d'acétylène pour le soudage, le coupage et les techniques connexes - Exigences générales (ISO 14114:2017)

ISO 14114:2017 s'applique aux centrales de détente pour la distribution d'acétylène, depuis les raccords de sortie du robinet de bouteille ou du cadre de bouteilles jusqu'au raccord de sortie du robinet de fermeture principal. Elle spécifie les exigences pour la conception, les matériaux et les essais des centrales de détente pour la distribution d'acétylène utilisées pour le soudage, le coupage et les techniques connexes.
ISO 14114:2017 s'applique aux centrales de détente dans lesquelles des bouteilles d'acétylène individuelles ou des cadres de bouteilles d'acétylène sont raccordés pour permettre un soutirage collectif.
NOTE       Il existe des réglementations nationales concernant la limitation de la quantité de bouteilles individuelles ou de cadres de bouteilles d'acétylène dans un endroit unique (par exemple: en entrepôt ou connecté à une centrale de détente).
ISO 14114:2017 donne également une procédure d'essai des bloqueurs de décomposition.

Oprema za plamensko varjenje - Baterije jeklenk z acetilenom za varjenje, rezanje in varjenju sorodne tehnike - Splošne zahteve (ISO 14114:2017)

Ta dokument se uporablja za baterije jeklenk z acetilenom, ki segajo od ventila jeklenke ali izhodnih priključkov v snopih do izhodne povezave glavnega zapornega ventila. Določa zahteve za projektiranje, materiale ter preskušanje baterij jeklenk z acetilenom za dovajanje acetilena pri varjenju, rezanju in varjenju sorodnih tehnikah.
Ta dokument se uporablja za baterije jeklenk z acetilenom, v katerih so posamezne jeklenke ali snopi z acetilenom spojeni za skupno odvzemanje plina.
OPOMBA: Za omejitev količine posameznih jeklenk/snopov z acetilenom na enem mestu (npr. v skladišču ali povezanih v baterije) veljajo nacionalni predpisi.
Ta dokument obravnava tudi preskusni postopek za zaviralce razgradnje.

General Information

• Status: Published
• Publication Date: 30-Jan-2018
• Withdrawal Date: 30-Jul-2018
• ICS: 25.160.30 - Welding equipment
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 31-Jan-2018
• Completion Date: 31-Jan-2018
• Ref Project: SIST EN ISO 14114:2018 - Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017)

Relations

• Replaces: EN ISO 14114:2014 - Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2014)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14114:2018
01-oktober-2018
1DGRPHãþD
SIST EN ISO 14114:2014
Oprema za plamensko varjenje - Baterije jeklenk z acetilenom za varjenje, rezanje
in varjenju sorodne tehnike - Splošne zahteve (ISO 14114:2017)
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied
processes - General requirements (ISO 14114:2017)
Gasschweißgeräte - Acetylenflaschen-Batterieanlagen für Schweißen, Schneiden und
verwandte Verfahren - Allgemeine Anforderungen (ISO 14114:2017)
Matériel de soudage aux gaz - Centrales de détente pour la distribution d'acétylène pour
le soudage, le coupage et les techniques connexes - Exigences générales (ISO
14114:2017)
Ta slovenski standard je istoveten z: EN ISO 14114:2018
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 14114:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14114:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 14114:2018


EN ISO 14114
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2018
EUROPÄISCHE NORM
ICS 25.160.30 Supersedes EN ISO 14114:2014
English Version

Gas welding equipment - Acetylene manifold systems for
welding, cutting and allied processes - General
requirements (ISO 14114:2017)
Matériel de soudage aux gaz - Centrales de détente Gasschweißgeräte - Acetylenflaschen-Batterieanlagen
pour la distribution d'acétylène pour le soudage, le für Schweißen, Schneiden und verwandte Verfahren -
coupage et les techniques connexes - Exigences Allgemeine Anforderungen (ISO 14114:2017)
générales (ISO 14114:2017)
This European Standard was approved by CEN on 29 October 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14114:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14114:2018
EN ISO 14114:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14114:2018
EN ISO 14114:2018 (E)
European foreword
This document (EN ISO 14114:2018) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2018, and conflicting national standards shall be
withdrawn at the latest by July 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14114:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14114:2017 has been approved by CEN as EN ISO 14114:2018 wi
...