EN ISO 12180-1:2011
(Main)Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
ISO 12180-1:2011 defines the terms and concepts related to cylindricity of individual complete integral features only.
Geometrische Produktspezifikation (GPS) - Zylindrizität - Teil 1: Begriffe und Kenngrößen der Zylinderform (ISO 12180-1:2011)
Dieser Teil von ISO 12180 definiert nur Begriffe im Zusammenhang mit der Zylindrizität von einzelnen, vollständigen Geometrieelementen.
Spécification géométrique des produits (GPS) - Cylindricité - Partie 1: Vocabulaire et paramètres de cylindricité (ISO 12180-1:2011)
L'ISO 12180-1:2011 définit les termes et concepts liés uniquement à la cylindricité des éléments intégraux complets individuels.
Specifikacija geometrijskih veličin izdelka - Cilindričnost - 1. del: Slovar in parametri valjaste oblike (ISO 12180-1:2011)
Ta del ISO 12180 določa izraze in koncepte, povezane s cilindričnostjo posameznih samo vgrajenih funkcij.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12180-1:2011
01-november-2011
1DGRPHãþD
SIST-TS CEN ISO/TS 12180-1:2008
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND&LOLQGULþQRVWGHO 6ORYDULQ
SDUDPHWULYDOMDVWHREOLNH ,62
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and
parameters of cylindrical form (ISO 12180-1:2011)
Geometrische Produktspezifikation (GPS) - Zylindrizität - Teil 1: Begriffe und
Kenngrößen der Zylinderform (ISO 12180-1:2011)
Spécification géométrique des produits (GPS) - Cylindricité - Partie 1: Vocabulaire et
paramètres de cylindricité (ISO 12180-1:2011)
Ta slovenski standard je istoveten z: EN ISO 12180-1:2011
ICS:
01.040.17 Meroslovje in merjenje. Metrology and measurement.
Fizikalni pojavi (Slovarji) Physical phenomena
(Vocabularies)
17.040.20 Lastnosti površin Properties of surfaces
SIST EN ISO 12180-1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12180-1:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 12180-1:2011
EUROPEAN STANDARD
EN ISO 12180-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2011
ICS 01.040.17; 17.040.20 Supersedes CEN ISO/TS 12180-1:2007
English Version
Geometrical product specifications (GPS) - Cylindricity - Part 1:
Vocabulary and parameters of cylindrical form (ISO 12180-
1:2011)
Spécification géométrique des produits (GPS) - Cylindricité Geometrische Produktspezifikation (GPS) - Zylindrizität -
- Partie 1: Vocabulaire et paramètres de cylindricité (ISO Teil 1: Begriffe und Kenngrößen der Zylinderform (ISO
12180-1:2011) 12180-1:2011)
This European Standard was approved by CEN on 26 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12180-1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12180-1:2011
EN ISO 12180-1:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 12180-1:2011
EN ISO 12180-1:2011 (E)
Foreword
This document (EN ISO 12180-1:2011) has been prepared by Technical Committee ISO/TC 213 "Dimensional
and geometrical product specifications and verification" in collaboration with Technical Committee
CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at
the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 12180-1:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12180-1:2011 has been approved by CEN as a EN ISO 12180-1:201
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.