Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)

This document covers the determination of the total luminous transmittance, in the visible region of the spectrum, of planar transparent plastics and substantially colourless plastics, using a double-beam scanning spectrophotometer. This document cannot be used for plastics which contain fluorescent materials.
This document is applicable to transparent moulding materials, films and sheets not exceeding 10 mm in thickness.
NOTE 1   Total luminous transmittance can also be determined by a single-beam instrument as in ISO 13468-1.
NOTE 2   Substantially colourless plastics include those which are faintly tinted.
NOTE 3   Specimens more than 10 mm thick can be measured provided the instrument can accommodate them, but the results cannot be comparable with those obtained using specimens less than 10 mm thick.

Kunststoffe - Bestimmung des totalen Lichttransmissionsgrades von transparenten Materialien - Teil 2: Zweistrahlinstrument (ISO 13468-2:2021)

Dieses Dokument behandelt die Bestimmung des totalen Lichttransmissionsgrades von ebenen, transparenten Kunststoffen und im Wesentlichen farblosen Kunststoffen im sichtbaren Spektralbereich mit einem abtastenden Zweistrahlspektralphotometer. Dieses Dokument kann nicht auf Kunststoffe mit fluoreszierenden Bestandteilen angewendet werden.
Dieses Dokument ist anzuwenden für transparente Formmassen, Folien und Tafeln, deren Dicke 10 mm nicht überschreitet.
ANMERKUNG 1 Der totale Lichttransmissionsgrad kann auch mit einem Einstrahlinstrument wie in ISO 13468 1 bestimmt werden.
ANMERKUNG 2 Zu den im Wesentlichen farblosen Kunststoffen gehören die schwach eingefärbten.
ANMERKUNG 3 Probekörper dicker als 10 mm können gemessen werden, vorausgesetzt, das Instrument kann sie aufnehmen, jedoch können die Ergebnisse mit denen, die mit Probekörpern einer Dicke kleiner als 10 mm erhalten wurden, nicht vergleichbar sein.

Plastiques - Détermination du facteur de transmission du flux lumineux total des matériaux transparents - Partie 2: Instrument à double faisceau (ISO 13468-2:2021)

Le présent document la détermination du facteur de transmission lumineuse totale, dans le domaine visible, des plastiques plans transparents et pratiquement incolores, au moyen d'un spectrophotomètre à double faisceau. Le présent document ne peut pas être appliqué aux plastiques contenant des matériaux fluorescents.
Le présent document est applicable aux matériaux pour moulage ainsi qu'aux feuilles minces, feuilles continues et films d'épaisseur inférieure ou égale à 10 mm.
NOTE 1   Le facteur de transmission lumineuse totale peut également être déterminé au moyen d'un instrument à faisceau unique, comme dans l'ISO 13468‑1.
NOTE 2   Dans les plastiques pratiquement incolores sont également inclus les plastiques légèrement colorés.
NOTE 3   Les éprouvettes de plus de 10 mm d'épaisseur peuvent être soumises au mesurage si la structure de l'appareillage utilisé le permet, mais les résultats ne sont pas comparables à ceux que l'on obtient sur des éprouvettes de moins de 10 mm.

Polimerni materiali - Ugotavljanje celotne prepustnosti svetlobe prozornih materialov - 2. del: Instrument z dvojnim žarkom (ISO 13468-2:2021)

General Information

Status
Published
Publication Date
15-Jun-2021
Withdrawal Date
30-Dec-2021
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
16-Jun-2021
Completion Date
16-Jun-2021

Relations

Buy Standard

Standard
EN ISO 13468-2:2021
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 13468-2:2021
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13468-2:2021
01-september-2021
Nadomešča:
SIST EN ISO 13468-2:2006
Polimerni materiali - Ugotavljanje celotne prepustnosti svetlobe prozornih
materialov - 2. del: Instrument z dvojnim žarkom (ISO 13468-2:2021)
Plastics - Determination of the total luminous transmittance of transparent materials -
Part 2: Double-beam instrument (ISO 13468-2:2021)
Kunststoffe - Bestimmung des totalen Lichttransmissionsgrades von transparenten
Materialien - Teil 2: Zweistrahlinstrument (ISO 13468-2:2021)
Plastiques - Détermination du facteur de transmission du flux lumineux total des
matériaux transparents - Partie 2: Instrument à double faisceau (ISO 13468-2:2021)
Ta slovenski standard je istoveten z: EN ISO 13468-2:2021
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 13468-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13468-2:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 13468-2:2021


EN ISO 13468-2
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2021
EUROPÄISCHE NORM
ICS 83.080.01 Supersedes EN ISO 13468-2:2006
English Version

Plastics - Determination of the total luminous
transmittance of transparent materials - Part 2: Double-
beam instrument (ISO 13468-2:2021)
Plastiques - Détermination du facteur de transmission Kunststoffe - Bestimmung des totalen
du flux lumineux total des matériaux transparents - Lichttransmissionsgrades von transparenten
Partie 2: Instrument à double faisceau (ISO 13468- Materialien - Teil 2: Zweistrahlinstrument (ISO 13468-
2:2021) 2:2021)
This European Standard was approved by CEN on 23 May 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13468-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 13468-2:2021
EN ISO 13468-2:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 13468-2:2021
EN ISO 13468-2:2021 (E)
European foreword
This document (EN ISO 13468-2:2021) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13468-2:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13468-2:2021 has been approved by CEN as EN ISO 13468-2:2021 without any
modification.


3

--
...

SLOVENSKI STANDARD
oSIST prEN ISO 13468-2:2021
01-april-2021
Polimerni materiali - Ugotavljanje celotne prepustnosti svetlobe prozornih
materialov - 2. del: Instrument z dvojnim žarkom (ISO/FDIS 13468-2:2021)
Plastics - Determination of the total luminous transmittance of transparent materials -
Part 2: Double-beam instrument (ISO/FDIS 13468-2:2021)
Kunststoffe - Bestimmung des totalen Lichttransmissionsgrades von transparenten
Materialien - Teil 2: Zweistrahlinstrument (ISO/FDIS 13468-2:2021)
Plastiques - Détermination du facteur de transmission du flux lumineux total des
matériaux transparents - Partie 2: Instrument à double faisceau (ISO/FDIS 13468-
2:2021)
Ta slovenski standard je istoveten z: prEN ISO 13468-2
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 13468-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13468-2:2021

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13468-2:2021
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 13468-2
ISO/TC 61/SC 5
Plastics — Determination of the
Secretariat: DIN
total luminous transmittance of
Voting begins on:
2020-12-22 transparent materials —
Voting terminates on:
Part 2:
2021-03-16
Double-beam instrument
Plastiques — Détermination du facteur de transmission du flux
lumineux total des matériaux transparents —
Partie 2: Instrument à double faisceau
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 13468-2:2020(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13468-2:2021
ISO/FDIS 13468-2:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13468-2:2021
ISO/FDIS 13468-2:2020(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 2
5 Test specimens. 4
6 Conditioning . 5
7 Procedure. 5
8 Expression of results .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.