Copper and copper alloys - Rod and wire for welding and braze welding

This European Standard specifies the composition, property requirements and dimensional tolerances for copper and copper alloy rod and wire intended for welding and braze welding purposes.
The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.

Kupfer und Kupferlegierungen - Stangen und Drähte für Schweißzusatzwerkstoffe und Fugenlote

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften und Grenzabmaße für Stangen und Drähte aus Kupfer und Kupferlegierungen für Schweißzusatzwerkstoffe und Hartlote fest. Der Ablauf der Probenentnahme, die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen dieser Norm und die Lieferbedingungen sind ebenfalls festgelegt.

Cuivre et alliages de cuivre - Barres et fils pour soudage et brasage

La présente Norme européenne spécifie la composition, les caractéristiques et les tolérances dimensionnelles des barres et fils en cuivre et alliages de cuivre destinés au soudage et au brasage.
Les modes opératoires d'échantillonnage, les méthodes d'essai pour la vérification de la conformité aux exigences de la présente norme et les conditions de livraison sont également spécifiées.

Baker in bakrove zlitine – Palice in žice za varjenje in trdo spajkanje

General Information

Status
Withdrawn
Publication Date
03-Dec-2002
Withdrawal Date
22-Jan-2013
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
23-Jan-2013
Completion Date
23-Jan-2013

Buy Standard

Standard
EN 13347:2004
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine – Palice in žice za varjenje in trdo spajkanjeKupfer und Kupferlegierungen - Stangen und Drähte für Schweißzusatzwerkstoffe und FugenloteCuivre et alliages de cuivre - Barres et fils pour soudage et brasageCopper and copper alloys - Rod and wire for welding and braze welding77.150.30Bakreni izdelkiCopper products25.160.20Potrošni material pri varjenjuWelding consumablesICS:Ta slovenski standard je istoveten z:EN 13347:2002SIST EN 13347:2004en01-januar-2004SIST EN 13347:2004SLOVENSKI
STANDARD



SIST EN 13347:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13347December 2002ICS 25.160.20; 25.160.50; 77.150.30English versionCopper and copper alloys - Rod and wire for welding and brazeweldingCuivre et alliages de cuivre - Barres et fils pour soudage etbrasageKupfer und Kupferlegierungen - Stangen und Drähte fürSchweißzusatzwerkstoffe und FugenloteThis European Standard was approved by CEN on 23 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13347:2002 ESIST EN 13347:2004



EN 13347:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Designations.54.1Material.54.2Product.55Ordering information.66Requirements.66.1Composition.66.2Dimensions and tolerances.77Sampling.78Test methods.78.1Analysis.78.2Rounding of results.89Declaration of conformity and inspection documentation.99.1Declaration of conformity.99.2Inspection d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.