EN 12629-2:2002
(Main)Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines
This Standard applies to machines and assemblies for the manufacture of blocks, kerbs, paving stones and similar concrete products.
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 2: Steinformmaschinen
1.1 Diese Norm gilt für Maschinen zur Herstellung von Blöcken, Bordsteinen, Pflastersteinen und ähnlichen Betonprodukten.
1.2 Diese Norm behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungs-ereignisse, die auf diese Maschinen zutreffen, wenn sie bestimmungsgemäß und entsprechend den vorhersehbaren Empfehlungen des Herstellers verwendet werden (siehe Abschnitt 4). Diese Norm spezifiziert die entsprechenden technischen Maßnahmen zur Beseitigung oder Verminderung der Risiken, die von diesen Gefährdungen ausgehen.
1.3 Diese Norm gilt für die Maschine von der Stelle an, wo die Mischzufuhr die Maschine befüllt (siehe Punkt 1 bis 2 von Anhang B) und an der Stelle, wo die Unterlagsbretter zugeführt werden (siehe Punkt 3 von Anhang B) bis zu der Stelle, wo die Frischprodukte zu dem "Trockenkammer-System" (siehe Punkt 4 von Anhang B) abtransportiert werden.
1.4 Diese Norm behandelt nicht die Anforderungen zur Verminderung von Gefährdungen durch mechanische, elektrische, pneumatische, hydraulische oder andere Bauteile oder Maschinen, die in den Normen für ihre allgemeine Verwendung (Typ A, B1 und B2-Normen) behandelt sind.
1.5 Diese Norm behandelt die in Abschnitt 4 aufgeführten Gefährdungen, außer Gefährdungen durch Lärm ), die während des Betriebs und der Wartung von Steinformmaschinen einschließlich der Schnittstellen auftreten können, wenn sie entsprechend den Angaben des Herstellers oder seines bevollmächtigten Vertreters betrieben werden.
ANMERKUNG 1 Eine Änderung ist in Vorbereitung, die Lärm behandelt sowie insbesondere Maßnahmen zur Lärmminderung an der Quelle und ein Geräuschmessverfahren einschließlich der Angabe von Geräuschemissionswerten.
ANMERKUNG 2 Schnittstellen zwischen Steinformmaschinen und anderen Teilen der Anlage werden in EN 12629-1:2000 (Abschnitt 7.2) behandelt.
Diese Norm behandelt Sicherheitsanforderungen und/oder Schutzverfahren, die für diese Maschinen gelten.
1.6 Bei den Vorgaben in dieser Norm wird davon ausg
Machines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 2: Machines à blocs
1.1 La présente norme européenne s'applique aux machines et installations utilisées pour la fabrication de blocs, bordures de trottoir, pavés et produits similaires en béton.
Stroji za izdelavo gradbenih proizvodov iz betona in apnenega peščenca - Varnost - 2. del: Stroji za izdelavo blokov
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 2: SteinformmaschinenMachines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 2: Machines a blocsMachines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines91.220Gradbena opremaConstruction equipmentICS:Ta slovenski standard je istoveten z:EN 12629-2:2002SIST EN 12629-2:2004en01-september-2004SIST EN 12629-2:2004SLOVENSKI
STANDARD
SIST EN 12629-2:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12629-2December 2002ICS 91.220English versionMachines for the manufacture of constructional products fromconcrete and calcium-silicate - Safety - Part 2: Block makingmachinesMachines pour la fabrication de produits de construction enbéton et silico-calcaire - Sécurité - Partie 2: Machines àblocsMaschinen für die Herstellung von Bauprodukten aus Betonund Kalksandsteinmassen - Sicherheit - Teil 2:SteinformmaschinenThis European Standard was approved by CEN on 1 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12629-2:2002 ESIST EN 12629-2:2004
EN 12629-2:2002 (E)2ContentspageForeword.3Introduction.41Scope.42Normative references.53Terms and definitions.54List of significant hazards.64.1Mechanical hazards (see informative annex B).64.2Electrical hazards.84.3Hazards generated by vibration.85Safety requirements and/or measures.86Verification of safety measures and/or provisions.97Information for use.98Marking.10Annex A (informative)
Mechanical hazards zones for a common block making machine andrequirements and measures.11Annex B (informative)
Terminology of a common block making machine.12Annex ZA (informative)
Relationship of this document with EC Directives.13Bibliography.14SIST EN 12629-2:2004
EN 12629-2:2002 (E)3ForewordThis document (EN 12629-2:2002) has been prepared by Technical Committee CEN /TC 151 "Constructionequipment and building material machines - Safety", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2003, and conflicting national standards shall be withdrawn at the latest byJune 2003.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EC Directive(s).For relationship with EC Directive(s), see informative annex ZA, which is an integral part of this document.The series "Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety"consists of following parts :Part 1 :Common requirementsPart 2 :Block making machinesPart 3 :Slide and turntable machinesPart 4 :Concrete roof tile making machinesPart 5.1 :Concrete pipe machines manufacturing in the vertical axis.Part 5.2 :Concrete pipe machines manufacturing in the horizontal axisPart 5.3 :Pipe prestressing machinesPart 5.4 :Concrete pipe coating machinesPart 6 :Stationary and mobile equipment for the manufacture of precast reinforced productsPart 7 :Stationary and mobile equipment for the benched manufacture of prestressed productsPart 8 :Machines and equipment for the manufacture of constructional products from calcium silicate (andconcrete)Annexes A and B are informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 12629-2:2004
EN 12629-2:2002 (E)4IntroductionThis European Standard is a Type C-standard as stated in EN 1070.The machinery concerned and the extent to which hazards, hazardous situations and events are covered areindicated in the scope of this standard.When provisions of this type C standard are different from those which are stated in type A or B standards, theprovisions of this type C standard take precedence over the provisions of the other standards, for machines thathave been designed and built according to the provisions of this type C standard.Reference to pertinent standards mentioned above is made where requirements of such standards are relevant.1 Scope1.1This European Standard applies to machines for the manufacture of blocks, kerbs, paving stones and similarconcrete products.1.2This European Standard deals with all significant hazards pertinent to these machines, when they are usedas intended under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifiesthe appropriate technical measures to eliminate or reduce risks arising from the significant hazards.1.3This European Standard applies to the machines from the point at which the mixture enters the machine (seepoint 1-2 of annex B) and the point where the pallet boards are brought to the assembly (see point 3 of annex B)until the point where the green products are removed from the machine assembly to the curing system (see point 4of annex B).1.4 This European standard does not cover those requirements for reducing hazards from mechanical,electrical, pneumatic, hydraulic or other equipment or machinery that are dealt with in standards for their commonuse (Type A, B1 and B2 standards).1.5This European Standard deals with the hazards other than noise hazards1) listed in clause 4 which can ariseduring the operation and maintenance, including the interfaces, of the block making machines, when carried out inaccordance with the specifications given by the manufacturer or his authorised representative.NOTE 1Amendment is under preparation to deal with noise, in particular for measures to reduce noise at source and anoise test code including noise declaration.NOTE 2Interfaces between the block making machines and others of the installation are dealt with in EN 12629-1:2000(subclause 7.2).This standard establishes safety requirements and/or methods of protection which apply to these machines.1.6The provisions stated in this standard assume that all operators have been adequately informed and trained.
1)Until a noise test code (dealing with the measurement and declaration of noise emission values) specific to the machinescovered by this part is available to complement the requirements of 5.7.2 and 7.4.2 of EN 12629-1:2000, it cannot beconsidered that noise hazards are covered.SIST EN 12629-2:2004
EN 12629-2:2002 (E)52 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 292-1, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology,methodology.EN 292-2, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles andspecifications.EN 1070:1998, Safety of machinery — Terminology.EN 12629-1:2000, Machines for the manufacture of constructional products from concrete and calcium-silicate –Safety – Part 1: Common requirements.3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.