EN 14250:2004

Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners

This document specifies product requirements for prefabricated structural members (e.g. trusses, beams and girders) for use in buildings and bridges made from members of structural timber (with or without finger joints) assembled with punched metal plate fasteners.
The standard also covers methods to carry out the evaluation of conformity and the marking.

Holzbauwerke - Produktanforderungen an vorgefertigte Fachwerkträger mit Nagelplatten

Dieses Dokument legt Produktanforderungen an vorgefertigte tragende Bauteile (z. B. Fachwerkträger, Balken und Träger), die aus Bauteilen aus Bauholz für tragende Zwecke (mit oder ohne Keilzinkenverbindungen) unter Verwendung von Nagelplatten gefertigt wurden und die für die Verwendung in Gebäuden und Brücken bestimmt sind, fest.
Dieses Dokument enthält auch Verfahren zur Ausführung der Konformitätsbeurteilung und Kennzeichnung.

Structures en bois - Exigences des produits relatives aux éléments de structure préfabriqués utilisant des connecteurs à plaque métallique emboutie

Domaine d'application
La présente Norme Européenne fixe les exigences de produits relatives aux fermes préfabriquées assemblées au moyen de connecteurs à plaque métallique emboutie.

Lesene konstrukcije – Zahteve za proizvodnjo predhodno izdelanih konstrukcijskih elementov s kovinskimi ježastimi ploščami

General Information

• Status: Withdrawn
• Publication Date: 23-Nov-2004
• Withdrawal Date: 26-Jan-2010
• ICS: 91.080.20 - Timber structures
• Technical Committee: CEN/TC 124 - Timber structures
• Drafting Committee: CEN/TC 124/WG 2 - Solid timber
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Jan-2010
• Completion Date: 27-Jan-2010
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/112 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural timber products
• Ref Project: SIST EN 14250:2005 - Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners

Relations

• Replaces: EN 1059:1999 - Timber structures - Product requirements for prefabricated trusses using punched metal plate fasteners
• Effective Date: 22-Dec-2008
• Replaced By: EN 14250:2010 - Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fastenersStructures en bois - Exigences des produits relatives aux éléments de structure préfabriqués utilisant des connecteurs a plaque métallique emboutieHolzbauwerke - Produktanforderungen an vorgefertigte Fachwerkträger mit NagelplattenTa slovenski standard je istoveten z:EN 14250:2004SIST EN 14250:2005en91.080.20ICS:SIST EN 1059:20001DGRPHãþDSLOVENSKI
STANDARDSIST EN 14250:200501-maj-2005







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14250
November 2004 ICS 91.080.20 Supersedes EN 1059:1999 English version
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Structures en bois - Exigences de produits relatives aux fermes préfabriquées utilisant des connecteurs à plaque métallique emboutie
Holzbauwerke - Produktanforderungen an vorgefertigte Fachewerkträger mit Nagelplatten This European Standard was approved by CEN on 22 July 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14250:2004: E



EN 14250:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Material requirements.6 4.1 Timber.6 4.1.1 Grading.6 4.1.2 Finger jointed timber.6 4.1.3 Resistance to biological organisms.6 4.2 Punched metal plate fasteners.6 5 Product requirements.7 5.1 Strength and stiffness.7 5.2 Reaction to fire.7 5.3 Structural members.8 5.3.1 Timber sizes.8 5.3.2 Wane.8 5.3.3 Joint gaps.
...