EN 1800:2006
(Main)Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testing
Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testing
This European Standard specifies the basic requirements for acetylene cylinders with a maximum nominal water capacity of 150 l, including:
- the procedure for type testing;
- the procedure for production/batch testing;
- the methods for determining the maximum permissible settled pressure;
- the method for determining the porosity of the porous material;
It does not include details of designs for the cylinder shell.
Ortsbewegliche Gasflaschen - Acetylenflaschen - Grundanforderungen, Definitionen und Typprüfung
Diese Europäische Norm legt die grundlegenden Anforderungen für Acetylenflaschen mit einem Nenn-Fassungsraum von maximal 150 l fest, einschließlich:
a) des Verfahrens für die Typprüfung;
b) des Verfahrens für die Herstellungs-/Stichprobenprüfung;
c) der Verfahren zur Bestimmung des maximal zulässigen festgelegten Druckes;
d) des Verfahrens zur Bestimmung der Porosität des porösen Materials.
Sie enthält keine Angaben über die Gestaltungen des Flaschenkörpers.
Bouteilles à gaz transportables - Bouteilles d'acétylène - Exigences fondamentales, définitions et essais de type
La présente Norme européenne spécifie les exigences fondamentales pour les bouteilles d�acétylène ayant
une contenance nominale maximale en eau de 150 l, y compris :
.le mode opératoire pour les essais de type ;
.le mode opératoire pour les essais de fabrication et par lots ;
.la méthode de détermination de la pression de travail ;
.la méthode de détermination de la porosité de la masse poreuse.
Elle ne traite pas en détail la conception du corps de la bouteille.
Premične plinske jeklenke – Jeklenke za acetilen – Osnovne zahteve, definicije in preskus tipa
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testingBouteilles a gaz transportables - Bouteilles d'acétylene - Exigences fondamentales, définitions et essais de typeOrtsbewegliche Gasflaschen - Acetylenflaschen - Grundanforderungen, Definitionen und TypprüfungTa slovenski standard je istoveten z:EN 1800:2006SIST EN 1800:2007en23.020.30MHNOHQNHPressure vessels, gas cylindersICS:SIST EN 1800:19991DGRPHãþDSLOVENSKI
STANDARDSIST EN 1800:200701-april-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1800November 2006ICS 23.020.30Supersedes EN 1800:1998
English VersionTransportable gas cylinders - Acetylene cylinders - Basicrequirements, definitions and type testingBouteilles à gaz transportables - Bouteilles d'acétylène -Exigences fondamentales, définitions et essais de typeOrtsbewegliche Gasflaschen - Acetylenflaschen -Grundanforderungen, Definitionen und TypprüfungThis European Standard was approved by CEN on 29 September 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1800:2006: E
EN 1800:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Basic requirements.6 5 Approval procedures.7 6 Solvent free acetylene cylinders.10 7 Acetylene cylinders used in bundles and battery-vehicles.10 Annex A (normative)
Procedure for type testing of dissolved acetylene cylinders.11 Annex B (normative)
Determination of porosity of the porous material.15 Annex C (normative)
Working pressure.16 Annex D (normative)
Production/batch test procedures for the preparation of porous material of acetylene cylinders.17 Bibliography.18
EN 1800:2006 (E) 3 Foreword This document (EN 1800:2006) has been prepared by Technical Committee CEN/TC 23 “Transportable gas cylinders”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2007, and conflicting national standards shall be withdrawn at the latest by May 2007. This European Standard has been submitted for reference into the RID and/or in the technical annexes of the ADR. Therefore in this context the standards listed in the normative references and covering
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.