iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12368:2000

(Main)

Traffic control equipment - Signal heads

Traffic control equipment - Signal heads

This European Standard only applies to red, yellow and green signal lights for road traffic with 200 mm and 300 mm roundels. It defines the requirements for the visual, structural, environmental performances and testing of signal heads for pedestrian and road traffic use. Portable signal lights are specifically excluded from the scope of this standard.

Anlagen zur Verkehrssteuerung - Signalleuchten

Diese Norm gilt nur für rote, gelbe und grüne Signallichter für den Straßen-verkehr mit 200 mm und 300 mm Leuchtfelddurchmesser. Es werden Anforderungen an Sichtbarkeit, Konstruktion, Umweltverträglichkeit sowie die Prüfverfahren für Signalleuchten für Anlagen im Fußgänger- und Straßenverkehrsbereich festgelegt. Orstveränderliche Signallichter sind nicht Gegenstand dieser Norm.

Equipement de régulation du trafic - Têtes de feux

La présente norme européenne s'applique seulement aux signaux lumineux rouges, jaunes et verts pour la régulation du trafic avec des feux circulaires de diamètres nominaux de 200 mm et 300 mm. Elle définit les exigences de performance visuelle, structurelle et concernant l'environnement et les essais ds têtes de feux utilisées pour la circulation des piétons et le trafic routier.Les signaux lumineux portables sont expressément exclus du domaine d'application de la présente norme.

Traffic control equipment - Signal heads

General Information

Status
Withdrawn
Publication Date
18-Jan-2000
Withdrawal Date
25-Apr-2006
ICS
93.080.30 - Road equipment and installations
Technical Committee
CEN/TC 226 - Road equipment
Drafting Committee
CEN/TC 226/WG 4 - Traffic control
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-Apr-2006
Completion Date
26-Apr-2006
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
Ref Project
SIST EN 12368:2002 - Traffic control equipment - Signal heads

Relations

Replaced By
EN 12368:2006 - Traffic control equipment - Signal heads
Effective Date
22-Dec-2008

Buy Standard

EN 12368:2002EN 12368:2002
PreviousNext
Standard
EN 12368:2002
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Traffic control equipment - Signal headsAnlagen zur Verkehrssteuerung - SignalleuchtenEquipement de régulation du trafic - Tetes de feuxTraffic control equipment - Signal heads93.080.30Cestna oprema in pomožne napraveRoad equipment and installationsICS:Ta slovenski standard je istoveten z:EN 12368:2000SIST EN 12368:2002en01-september-2002SIST EN 12368:2002SLOVENSKI
STANDARD
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 17812:2022(Main)
Determination of the acoustic properties of markings - The CPX measurement method
SIST-TS CEN/TS 17812:2022

This document outlines a method to measure the typical external noise emission produced when tyres of passenger car roll over a structured road marking. The result is a measure for the noise perceived in the surroundings of the road, hence not for interior noise in the car.
This method can be used for three purposes:
- determination of initial acoustic properties of a road marking, yielding a noise label for a given system;
- testing of the acoustic conformity of a particular marking to the noise label determined during the determination of initial acoustic properties;
- monitoring of the acoustic properties in the course of its lifetime.
The test result allows the road owner to make an assessment of the risk of nuisance when s/he considers a particular road marking system for application on a road in a noise sensitive area, e.g. built up areas. The method is also applicable to measurements on milled rumble strips.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-6:2018+A1:2021(Main + Amendment)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
SIST EN 1793-6:2018+A1:2021

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for traffic noise reducing devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed along roads, to be measured either in situ or in laboratory conditions;
-   determination of the in situ intrinsic characteristics of airborne sound insulation of noise reducing devices in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long term performance of noise reducing devices (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results will be given in a restricted frequency range and the reasons for the restriction(s) will be clearly reported.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16303:2020(Main)
Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
SIST EN 16303:2020

This document defines the accuracy, credibility and confidence in the results of virtual crash test to vehicle restraint systems through the definition of procedures for verification, validation and development of numerical models for roadside safety application. Finally it defines a list of indications to ensure the competences of an expert/organization in the domain of virtual testing.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1794-2:2020(Main)
Road traffic noise reducing devices - Non-acoustic performance - Part 2: General safety and environmental requirements
SIST EN 1794-2:2020

This document specifies methods and criteria for assessing the general safety and environmental performance of road traffic noise reducing devices under typical roadside conditions. Appropriate test methods are provided where these are necessary. The treatment of each topic is covered separately in Annexes A to E.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13422:2019(Main)
Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders
SIST EN 13422:2020

This document specifies requirements for new traffic cones and new traffic cylinders with retroreflective properties.
This document specifies minimum essential visual and physical performance characteristics; test methods for determination of product performance and the means by which this performance may be communicated to the user and the public including safety enforcement agencies.
The document provides a series of categories or classes by which a traffic cone or traffic cylinder may be specified for use in different applications in accordance with best practice.
In the case of physical properties, performance levels and indicative tests are provided for cold weather, stability, and impact resistance when dropped. Requirements for visual recognition properties, colour, retroreflectivity and luminance are provided.
Provision for identification and marking to declared levels of performance is provided.
There are other product shapes which perform similar functions. This document does not cover devices made in other shapes, or which do not meet the design requirements of this document.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12767:2019(Main)
Passive safety of support structures for road equipment - Requirements and test methods
SIST EN 12767:2019

This document specifies performance test procedures to determine the passive safety properties of support structures such as lighting columns, sign posts, signal supports, structural elements, foundations, detachable products and any other components used to support a particular item of equipment on the roadside.
This document provides a common basis for the vehicle impact testing of items of road equipment support structures.
This document does not apply to road restraint systems.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17342:2019(Main)
Road restraint systems - Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
SIST-TS CEN/TS 17342:2019

This document specifies requirements for the impact performance of systems designed for the reduction of impact severity for PTW riders impacting safety barriers whilst sliding along the ground, having fallen from their PTW vehicle. The protection systems concerned are those fitted to barriers or barriers that have an inherent PTW rider protection or risk reduction capability. This document excludes the assessment of the vehicle restraint capabilities of barriers and the risk that they represent to the occupants of impacting cars. The assessment of barrier performance with respect to impacting vehicles is covered by EN 1317-1 and EN 1317-2.
This document defines performance classes taking into account rider speed classes, impact severity and the working width of the system with respect to rider impacts.
For systems designed to be added to a standard barrier, the test results are valid only when the system is fitted to the model of barrier used in the tests since the performance will not necessarily be the same if the system is fitted to a different barrier.

  • Technical specification
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1794-1:2018+AC:2018(Main + Amendment)
Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements
SIST EN 1794-1:2018+AC:2019

This European Standard specifies criteria to categorize road traffic noise reducing devices according to basic mechanical performance under standard conditions of exposure, irrespective of the materials used. A range of conditions and optional requirements is provided in order to take into account the wide diversity of practice in Europe. Individual aspects of performance are covered separately in the annexes. Safety considerations in the event of damage to noise reducing devices are covered in EN 1794-2.
This European Standard covers the current behaviour of the product. In order to assess its long term performances, EN 14389-2 should be used.
NOTE   The test procedure described in Annex A doesn't consider the fatigue effect.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12966:2014+A1:2018(Main + Amendment)
Road vertical signs - Variable message traffic signs
SIST EN 12966:2015+A1:2019

This European Standard provides specifications for two types of variable message signs (VMS); i.e. continuous (see 3.4) and discontinuous (see 3.7).
This European Standard covers mobile, temporary and permanently installed VMS used in circulation areas, on public and private land, including tunnels for the information, guidance, warning and/or direction of traffic. Test modules are used to demonstrate compliance with the requirements.
This European Standard specifies visual and physical characteristics of VMS as well as their durability aspects. It also provides relevant requirements and corresponding test methods, assessment and verification of constancy of performance (AVCP) and marking.
NOTE Provisions for the evaluation of conformity with regards to type testing are further specified in 6.2; provisions with regards to factory production control (FPC) are further specified in 6.3.
This European Standard does not cover
a) sign gantries, cantilevers, posts (supports) and foundations,
b) signal heads,
c) sizes and shapes of VMS messages,
d) control units and monitoring units unless inside the VMS,
e) control of sign luminance.

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-5:2016/AC:2018(Corrigendum)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
SIST EN 1793-5:2016/AC:2018

TC - Modification to Formula (4) in all three language versions.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day