Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 1: Durability of self-closing of hinged and pivoted steel doorsets

This document covers single and double leaf, hinged and pivoted, steel based doorsets as covered by EN 15269-2 and/or EN 15269-20.
This document prescribes the methodology for extending the application of test results obtained from durability of self-closing test(s) conducted in accordance with EN 1191 and or EN 12605:2000, as appropriate.
Subject to the completion of the appropriate durability of self-closing test(s), the extended application can cover all or some of the following non-exhaustive list:
- door leaf;
- side, transom and/or overpanels;
- ventilation grilles and/or louvres;
- wall or ceiling fixed parts or items of the doorset, e.g. frame or suspensions systems;
- glazing for door leaf, side, transom and flush over panels;
- items of building hardware;
- decorative finishes;
- intumescent strips, smoke, draught or acoustic seals;
- alternative supporting construction(s).

Erweiterte Anwendung von Prüfergebnissen zur Dauerhaftigkeit der Selbstschließung für Feuerschutz- und/oder Rauchschutztüren, -tore und zu öffnende Fenster - Teil 1: Dauerhaftigkeit der Selbstschließung von Drehflügeltüren und -toren aus StahlStahl

Dieses Dokument behandelt ein- und zweiflüglige Drehflügeltüren und -tore aus Stahl nach EN 15269 2 bzw. nach EN 15269 20.
Dieses Dokument schreibt die Methodik zur Erweiterung der Anwendung von Prüfergebnissen zur Dauerhaftigkeit der Selbstschließung vor, die nach EN 1191 bzw. nach EN 12605:2000, je nach dem welches Verfahren zutrifft, durchgeführt wurden.
In Abhängigkeit von der Durchführung der entsprechenden Prüfung(en) zur Dauerhaftigkeit der Selbstschließung kann die erweiterte Anwendung die nachfolgende nicht-abschließende Auflistung ganz oder auch nur teilweise abdecken:
—   Tür-/Torflügel/-blatt;
—   Seiten- und Oberteile mit oder ohne Kämpfer;
—   Lüftungsgitter und/oder –lamellen;
—   an der Wand oder Decke befestigten Teile oder Bestandteile der Tür/des Tores, z. B. Türzarge oder Aufhängungssysteme;
—   Verglasung für Türflügel/Türblatt, Seitenteile und Oberteile mit und ohne Kämpfern;
—   Baubeschläge;
—   dekorative Beschichtungen;
—   dämmschichtbildende Streifen sowie Dichtungen zur Behinderung von Rauchdurchtritt (Rauch-schutzdichtungen), Durchzug oder Schallübertragung (Schallschutzdichtungen);
—   alternative Tragkonstruktion(en).

Application étendue des résultats d’essais de durabilité de la fermeture automatique des blocs-portes et fenêtres ouvrantes résistants au feu et/ou étanches à la fumée - Partie 1 : Durabilité de la fermeture automatique des blocs-portes battants et pivotants en acier

Le présent document couvre les blocs-portes battants et pivotants à base d’acier, à un ou deux vantaux, visés par l’EN 15269-2 et/ou l’EN 15269-20.
Le présent document prescrit la méthodologie permettant d’étendre l’application des résultats d’essai obtenus après un ou des essais de durabilité de la fermeture automatique réalisés conformément à l’EN 1191 et/ou l’EN 12605:2000, selon le cas.
Sous réserve de la réalisation de l’essai ou des essais appropriés de durabilité de la fermeture automatique, l’application étendue peut couvrir tout ou partie de la liste non exhaustive suivante :
- vantail ;
- panneaux latéraux, supérieurs et/ou d’imposte ;
- grilles de ventilation et/ou jalousies ;
- parties fixes murales ou de plafond ou accessoires du bloc-porte, par exemple dormant ou systèmes de suspensions ;
- vitrage pour vantail ou panneaux latéraux et d’imposte ;
- éléments de quincaillerie de bâtiment ;
- finitions décoratives ;
- bandes intumescentes, joints d’étanchéité à la fumée, à l’air ou acoustiques ;
- autres constructions supports.

Razširjena uporaba rezultatov preskusov trajnosti samozapiranja za požarno odporna in/ali dimotesna vrata in okna, ki se odpirajo - 1. del: Trajnost samozapiranja jeklenih vrat z vrtljivim krilom

Ta dokument zajema enoslojna in dvoslojna jeklena vrata z vrtljivim krilom, obravnavana v standardu EN 15269-2 oziroma EN 15269-20.
Ta dokument predpisuje metodologijo za razširitev uporabe rezultatov, pridobljenih iz preskusov trajnosti samozapiranja, izvedenih v skladu s standardom EN 1191.
Razširjena uporaba lahko (glede na opravljene ustrezne preskuse samozapiranja) zajema vse ali nekatere primere iz naslednjega neizčrpnega seznama:
–   vratno krilo;
–   stranice, tramovi in/ali podboji;
–   prezračevalne rešetke in/ali žaluzijske lopute;
–   stensko/stropno okovje (okvir/sistem vzmetenja);
–   steklo za vratno krilo, stranice, tramove in poravnane podboje;
–   elementi stavbnega okovja;
–   okrasni zaključki;
–   intumescentna, dimna, protihrupna tesnila ali tesnila proti prepihu;
–   alternativne podporne konstrukcije.

General Information

Status
Published
Publication Date
08-Nov-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
09-Nov-2022
Due Date
26-Aug-2021
Completion Date
09-Nov-2022

Buy Standard

Standard
EN 17020-1:2023
English language
88 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2023
Razširjena uporaba rezultatov preskusov trajnosti samozapiranja za požarno
odporna in/ali dimotesna vrata in okna, ki se odpirajo - 1. del: Trajnost
samozapiranja jeklenih vrat z vrtljivim krilom
Extended application of test results on durability of self-closing for fire resistance and/or
smoke control doorsets and openable windows - Part 1: Durability of self-closing of
hinged and pivoted steel doorsets
Erweiterter Anwendungsbereich von Prüfergebnissen zur Dauerhaftigkeit des
Selbstschließens für Feuerschutz- und/oder Rauchschutztüren und zu öffnende Fenster
- Teil 1: Dauerhaftigkeit des Selbstschließens von Drehflügeltoren und Drehflügeltüren
aus Stahl
Application étendue des résultats d ’essais de durabilité de la fermeture automatique des
blocs-portes et fenêtres ouvrantes résistants au feu et/ou étanches à la fumée - Partie 1
: Durabilité de la fermeture automatique des blocs-portes battants et pivotants en acier
Ta slovenski standard je istoveten z: EN 17020-1:2022
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17020-1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2022
EUROPÄISCHE NORM
ICS 13.220.50; 91.060.50
English Version
Extended application of test results on durability of self-
closing for fire resistance and/or smoke control doorsets
and openable windows - Part 1: Durability of self-closing
of hinged and pivoted steel doorsets
Application étendue des résultats d'essais de durabilité Erweiterter Anwendungsbereich von Prüfergebnissen
de la fermeture automatique des blocs-portes et zur Dauerhaftigkeit des Selbstschließens für
fenêtres ouvrantes résistants au feu et/ou étanches à la Feuerschutz- und/oder Rauchschutztüren und zu
fumée - Partie 1 : Durabilité de la fermeture öffnende Fenster - Teil 1: Dauerhaftigkeit des
automatique des blocs-portes battants et pivotants en Selbstschließens von Drehflügeltoren und
acier Drehflügeltüren aus Stahl
This European Standard was approved by CEN on 5 September 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17020-1:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Determination of the field of extended application . 8
4.1 General . 8
4.2 Procedure for evaluation . 9
4.3 Procedure for maximum field of extended application . 9
4.4 Interpretation of test results . 10
5 Extended application report . 10
6 Classification report . 10
Annex A (normative) Construction parameter variations . 11
Annex B (normative) Arrangements for doorsets incorporating side and/or over panels . 80
Annex C (normative) Construction parameter variation simulation by applying additional
weights . 87
Bibliography . 88

European foreword
This document (EN 17020-1:2022) has been prepared by Technical Committee CEN/TC 127 “Fire safety
in buildings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2023, and conflicting national standards shall be
withdrawn at the latest by May 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
A list of all parts in the EN 17020 series and the EN 15269 series can be found on the CEN website.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
The EN 15269 series of standards covering extended application of test results for fire resistance and/or
smoke control for doorsets, openable windows and shutter assemblies, including their items of building
hardware, does not yet include the durability of self-closing following an extended application process.
This document is one of the EN 17020 series of standards intended to be used for the purpose of
producing an extended application report based on the evaluation of one or more durability of self-
closing tests. These European Standards may also be used to identify the best selection of test specimens
required to cover a wide range of product variations.
1 Scope
This document covers single and double leaf, hinged and pivoted, steel based doorsets as covered by
EN 15269-2 and/or EN 15269-20.
This document prescribes the methodology for extending the application of test results obtained from
durability of self-closing test(s) conducted in accordance with EN 1191 and or EN 12605:2000, as
appropriate.
Subject to the completion of the appropriate durability of self-closing test(s), the extended application
can cover all or some of the following non-exhaustive list:
— door leaf;
— side, transom and/or overpanels;
— ventilation grilles and/or louvres;
— wall or ceiling fixed parts or items of the doorset, e.g. frame or suspensions systems;
— glazing for door leaf, side, transom and flush over panels;
— items of building hardware;
— decorative finishes;
— intumescent strips, smoke, draught or acoustic seals;
— alternative supporting construction(s).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 179, Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on
escape routes - Requirements and test methods
EN 1125, Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes -
Requirements and test methods
EN 1154, Building hardware - Controlled door closing devices - Requirements and test methods
EN 1155, Building hardware - Electrically powered hold-open devices for swing doors - Requirements and
test methods
EN 1158, Building hardware - Door coordinator devices - Requirements and test methods
EN 1191, Windows and doors - Resistance to repeated opening and closing - Test method
EN 1363-1, Fire resistance tests - Part 1: General requirements
EN 1634-1, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and
elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable
windows
EN 1634-3, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and
elements of building hardware - Part 3: Smoke control test for door and shutter assemblies
EN 1935:2002 , Building hardware - Single-axis hinges - Requirements and test methods
EN 12209, Building hardware - Mechanically operated locks and locking plates - Requirements and test
methods
EN 12519, Windows and pedestrian doors - Terminology
EN 12605:2000, Industrial, commercial and garage doors and gates - Mechanical aspects - Test Methods
EN 13501-2, Fire classification of construction products and building elements - Part 2: Classification using
data from fire resistance tests, excluding ventilation services
EN 13637, Building hardware - Electrically controlled exit systems for use on escape routes - Requirements
and test methods
EN 14846, Building hardware - Locks and latches - Electromechanically operated locks and striking plates
- Requirements and test methods
EN 15269-1, Extended application of test results for fire resistance and/or smoke control for door, shutter
and openable window assemblies, including their elements of building hardware - Part 1: General
requirements
EN 15269-2, Extended application of test results for fire resistance and/or smoke control for door, shutter
and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of
hinged and pivoted steel doorsets
, Building hardware – Multipoint locks, latches and locking plates - Requirements and test
EN 15685
methods
EN 16034, Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product
standard, performance characteristics - Fire resisting and/or smoke control characteristics
EN 16035, Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate
the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets
and/or openable windows
EN ISO 13943, Fire safety - Vocabulary (ISO 13943)

As impacted by EN 1935:2002/AC:2003.
Under preparation. Stage at the time of publication: prEN 15685:2022.
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 1191, EN 1363-1, EN 1363-2,
EN 1634-1, EN 1634-3, EN 12519, EN 15269-1, EN 15269-2 and EN ISO 13943 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
full scale test
test of a full size doorset in accordance with EN 1191
3.2
core
material fitted centrally within the thickness of a door leaf which may consist of a single sheet of material
or a combination either of sheets of the same material or layers of different materials
3.3
panel
component of a door leaf separated from other elements by joints which break through the total door leaf
thickness
Note 1 to entry: A door leaf can consist of one or more panels.
3.4
add
to put an additional component to the doorset which has not been tested as a part of the original doorset
3.5
remove
to take a component away which has been tested as a part of the original doorset
3.6
alternative
variation intended by the application of EXAP rules where
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.