EN 13263-2:2005+A1:2009

Silica fume for concrete - Part 2: Conformity evaluation

This part of EN 13263 specifies the scheme for the evaluation of conformity of silica fume to EN 13263-1, including certification of conformity by a certification body.
This European Standard provides technical rules for production control by the manufacturer, including autocontrol testing of samples, and for the tasks of the certification body. It also provides rules for actions to be followed in the event of non-conformity and the procedure for the certification of conformity.

Silikastaub für Beton - Teil 2: Konformitätsbewertung

Dieser Teil der EN 13263 legt das Verfahren für die Konformitätsbewertung von Silikastaub nach EN 13263 1 fest einschließlich der Zertifizierung der Konformität durch eine Zertifizierungsstelle.
Diese Europäische Norm enthält technische Regeln für die Produktionskontrolle durch den Hersteller, einschließlich der internen Überwachungsprüfungen von Proben, und für die Aufgaben der Zertifizierungs-stelle. Es enthält darüber hinaus Regeln für Maßnahmen, die bei Nichtkonformität zu ergreifen sind, sowie das Verfahren für die Zertifizierung der Konformität.

Fumée de silice pour béton - Partie 2: Evaluation de la conformité

Cette partie de l’EN 13263 spécifie le système d’évaluation de la conformité de la fumée de silice dans l’EN 13263-1,
comprenant la certification de conformité par un organisme de certification.
Cette Norme européenne présente des règles techniques relatives au contrôle de production effectué par le fabricant
(essai d’auto-contrôle des échantillons inclus) et aux tâches de l’organisme de certification. Le document présente
également des règles relatives aux actions à suivre en cas de non-conformité et les modes opératoires de certification
de conformité.

Mikro silika za beton - 2. del: Ovrednotenje skladnosti

General Information

• Status: Published
• Publication Date: 10-Mar-2009
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/WG 9 - Silica fume for concrete
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jul-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 13263-2:2005+A1:2009 - Silica fume for concrete - Part 2: Conformity evaluation

Relations

• Merged From: EN 13263-2:2005 - Silica fume for concrete - Part 2: Conformity evaluation
• Effective Date: 19-Jan-2023
• Merged From: EN 13263-2:2005/prA1 - Silica fume for concrete - Part 2: Conformity evaluation
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Mikro silika za beton - 2. del: Ovrednotenje skladnostiSilikastaub für Beton - Teil 2: KonformitätsbewertungFumée de silice pour béton - Partie 2: Evaluation de la conformitéSilica fume for concrete - Part 2: Conformity evaluation91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 13263-2:2005+A1:2009SIST EN 13263-2:2005+A1:2009en,fr,de01-julij-2009SIST EN 13263-2:2005+A1:2009SLOVENSKI
STANDARDSIST EN 13263-2:20051DGRPHãþD



SIST EN 13263-2:2005+A1:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13263-2:2005+A1
March 2009 ICS 91.100.30 Supersedes EN 13263-2:2005English Version
Silica fume for concrete - Part 2: Conformity evaluation
Fumée de silice pour béton - Partie 2: Evaluation de la conformité
Silikastaub für Beton - Teil 2: Konformitätsbewertung This European Standard was approved by CEN on 19 May 2005 and includes Amendment 1 approved by CEN on 8 February 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13263-2:2005+A1:2009: ESIST EN 13263-2:2005+A1:2009



EN 13263-2:2005+A1:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Tasks for the manufacturer .84.1Factory production control .84.2Internal quality control .94.3Autocontrol testing of samples . 114.4Further testing of samples . 115Tasks for the certification body . 125.1General . 125.2Surveillance, assessment and acceptance of the factory production control . 125.3Evaluation of the results of autocontrol testing of samples . 125.4Audit testing of samples taken at the production plant/depot and initial type testing . 135.5Initial inspection of the production facilities and the factory production control . 145.6Evaluation of test results during the initial period . 156Actions in the event of non-conformity . 156.1Actions to be taken by the manufacturer . 156.2Actions to be taken by the certification body .
...