EN 13110:2002

Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction

This European Standard specifies minimum requirements for certain aspects concerning material, design, construction and workmanship, procedure and test at manufacture of transportable refillable welded aluminium LIQUEFIED PETROLEUM GAS cylinders of water capacity from 0,5 l up to and including 150 l exposed to ambient temperatures, and having a single piece with welded cap design as shown in figure 3.

Ortsbewegliche, wieder befüllbare geschweißte Flaschen ausAluminium für Flüssiggas (LPG) - Gestaltung und Konstruktion

Diese Europäische Norm legt die Mindestanforderungen an Werkstoffe, Gestaltung, Konstruktion und fachgerechte Ausführungsweise, Herstellungsverfahren und Prüfung ortsbeweglicher, wiederbefüllbarer, geschweißter Flüssiggasflaschen (LPG) aus Aluminium mit einem Fassungsraum von 0,5 l bis einschließlich 150 l fest, wenn diese der Umgebungstemperatur ausgesetzt werden.

Bouteilles soudées transportables et rechargeables en aluminium pour gaz de pétrole liquéfié - Conception et construction

Cette Norme européenne spécifie les exigences minimales relatives aux matériaux, au calcul, à la construction, aux procédures d'exécution ainsi qu'aux essais et examens lors de la fabrication des bouteilles soudées transportables et rechargeables en aluminium pour gaz de pétrole liquéfié (GPL) d'une capacité en eau comprise entre 0,5 l et 150 l inclus, et exposées à la température ambiante.

Premične ponovno polnljive varjene aluminijeve jeklenke za utekočinjeni naftni plin (UNP) - Načrtovanje in izdelava

General Information

• Status: Withdrawn
• Publication Date: 19-Nov-2002
• Withdrawal Date: 15-May-2012
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 1 - Design and manufacture of LPG pressure vessels
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 16-May-2012
• Completion Date: 16-May-2012
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Directive: TRRTP121 - Sklep o objavi prilog A in B k Evropskemu sporazumu o mednarodnem cestnem prevozu nevarnega blaga (ADR)
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 13110:2003 - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction

Relations

• Replaced By: EN 13110:2012 - LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ortsbewegliche, wieder befüllbare geschweißte Flaschen ausAluminium für Flüssiggas (LPG) - Gestaltung und KonstruktionBouteilles soudées transportables et rechargeables en aluminium pour gaz de pétrole liquéfié - Conception et constructionTransportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction77.150.10Aluminijski izdelkiAluminium products23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 13110:2002SIST EN 13110:2003en01-december-2003SIST EN 13110:2003SLOVENSKI
STANDARD



SIST EN 13110:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13110November 2002ICS 23.020.30English versionTransportable refillable welded aluminium cylinders for liquefiedpetroleum gas (LPG) - Design and constructionBouteilles soudées transportables et rechargeables enaluminium pour gaz de pétrole liquéfiés - Conception etconstructionOrtsbewegliche, wieder befüllbare geschweißte FlaschenausAluminium für Flüssiggas (LPG) - Gestaltung undKonstruktionThis European Standard was approved by CEN on 9 September 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13110:2002 ESIST EN 13110:2003



EN 13110:2002 (E)2ContentspageForeword.4Introduction.51Scope.52Normative references.53Terms, definitions and symbols.63.1Terms and definitions.63.2Symbols.64Materials.75Design.85.1General requirements.85.2Calculation of cylindrical wall thickness.85.3Design of ends concave to pressure.85.4Other shapes of ends.125.5Minimum wall thickness.135.6Design of openings.135.7Neck design.135.8Stability.
...