EN ISO 25745-2:2015/prA1
(Amendment)Energy performance of lifts, escalators and moving walks - Part 2: Energy calculation and classification for lifts (elevators) - Amendment 1 Express zones (ISO 25745-2:2015/DAM 1:2022)
Energy performance of lifts, escalators and moving walks - Part 2: Energy calculation and classification for lifts (elevators) - Amendment 1 Express zones (ISO 25745-2:2015/DAM 1:2022)
Energieeffizienz von Aufzügen, Fahrtreppen und Fahrsteigen - Teil 2: Energieberechnung und Klassifizierung von Aufzügen - Änderung 1: Expresszonen (ISO 25745-2:2015/DAM 1:2022)
j) wird gestrichen.
ANMERKUNG 2 wird gestrichen.
Performance énergétique des ascenseurs, escaliers mécaniques et trottoirs roulants - Partie 2: Calcul énergétique et classification des ascenseurs Amendement 1 (ISO 25745-2:2015/DAM 1:2022)
Energetska učinkovitost dvigal (liftov), tekočih stopnic in tekočih stez - 2. del: Energetski izračun in razvrstitev liftov - Dopolnilo A1: Ekspresne cone (ISO 25745-2:2015/DAM 1:2022)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 25745-2:2015/oprA1:2023
01-februar-2023
Energetska učinkovitost dvigal (liftov), tekočih stopnic in tekočih stez - 2. del:
Energetski izračun in razvrstitev liftov - Dopolnilo A1: Ekspresne cone (ISO 25745-
2:2015/DAM 1:2022)Energy performance of lifts, escalators and moving walks - Part 2: Energy calculation
and classification for lifts (elevators) - Amendment 1 Express zones (ISO 25745-2:2015/DAM 1:2022)
Performance énergétique des ascenseurs, escaliers mécaniques et trottoirs roulants -
Partie 2: Calcul énergétique et classification des ascenseurs Amendement 1 (ISO25745-2:2015/DAM 1:2022)
Ta slovenski standard je istoveten z: EN ISO 25745-2:2015/prA1
ICS:
91.140.90 Dvigala. Tekoče stopnice Lifts. Escalators
SIST EN ISO 25745-2:2015/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------SIST EN ISO 25745-2:2015/oprA1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 25745-2:2015/oprA1:2023
DRAFT AMENDMENT
ISO 25745-2:2015/DAM 1
ISO/TC 178 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2022-12-26 2023-03-20
Energy performance of lifts, escalators and moving
walks —
Part 2:
Energy calculation and classification for lifts (elevators)
AMENDMENT 1: Express zones
ICS: 91.140.90
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 25745-2:2015/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
SIST EN ISO 25745-2:2015/oprA1:2023
ISO 25745-2:2015/DAM 1:2022(E)
DRAFT AMENDMENT
ISO 25745-2:2015/DAM 1
ISO/TC 178 Secretariat: AFNOR
Voting begins on: Voting terminates on:
Energy performance of lifts, escalators and moving
walks —
Part 2:
Energy calculation and classification for lifts (elevators)
AMENDMENT 1: Express zones
ICS: 91.140.90
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONALbe reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION ASor ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL ANDISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 25745-2:2015/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
SIST EN ISO 25745-2:2015/oprA1:2023
ISO 25745-2:2015/DAM 1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. Int
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.