EN 10263-4:2001

Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering

1.1 This Part of EN 10263 is applicable to round rod and round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion and subsequent quenching and tempering
1.2 This Part of EN 10263 is complemented by EN 10263-1.

Walzdraht, Stäbe und Draht aus Kaltstauch- und Kaltfließpressstählen - Teil 4: Technische Lieferbedingungen für Vergütungsstähle

1.1 Dieser Teil von EN 10263 gilt für runden Walzdraht, runde Stäbe und Draht mit einem Durch-messer
bis einschließlich 100 mm aus unlegiertem und legiertem Stahl zum Kaltstauchen und Kaltfließ-pressen
und nachfolgendem Vergüten.
1.2 Dieser Teil von EN 10263 wird ergänzt durch EN 10263-1.

Barres, fil machine et fils en acier pour transformation à froid et extrusion à froid - Partie 4: Conditions techniques de livraison des aciers pour trempe et revenu

1.1   La présente partie 4 de l'EN 10263 s'applique au fil machine de section ronde aux barres rondes et au fil ayant un diamètre inférieur ou égal à 100 mm, en acier allié et non allié, destinés à des opérations de transformation à froid et d'extrusion à froid, suivies d'un traitement par trempe et revenu.
1.2   La présente partie 4 de l'EN 10263 est complétée par l'EN 10263-1.

Jekleni drogovi, palice in žica za hladno nakrčevanje in hladno iztiskanje - 4. del: Tehnični dobavni pogoji za jekla za poboljšanje

General Information

• Status: Withdrawn
• Publication Date: 19-Jun-2001
• Withdrawal Date: 21-Nov-2017
• ICS: 77.140.60 - Steel bars and rods
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: ECISS/TC 106 - Wire rod and wires
• Drafting Committee: ECISS/TC 15 - Wire-rod - Qualities, dimensions, tolerances and specific tests
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Nov-2017
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10263-4:2002 - Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering

Relations

• Replaced By: EN 10263-4:2017 - Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering
• Effective Date: 08-Jun-2022
• Corrected By: EN 10263-4:2001/AC:2002 - Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering
• Effective Date: 08-Jun-2022
• Parent: EN 10263-1:2001 - Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10263-4:2002
01-september-2002
-HNOHQLGURJRYLSDOLFHLQåLFD]DKODGQRQDNUþHYDQMHLQKODGQRL]WLVNDQMHGHO
7HKQLþQLGREDYQLSRJRML]DMHNOD]DSREROMãDQMH
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery
conditions for steels for quenching and tempering
Walzdraht, Stäbe und Draht aus Kaltstauch- und Kaltfließpressstählen - Teil 4:
Technische Lieferbedingungen für Vergütungsstähle
Barres, fil machine et fils en acier pour transformation a froid et extrusion a froid - Partie
4: Conditions techniques de livraison des aciers pour trempe et revenu
Ta slovenski standard je istoveten z: EN 10263-4:2001
ICS:
77.140.60 Jeklene palice in drogovi Steel bars and rods
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
SIST EN 10263-4:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 10263-4:2002

---------------------- Page: 2 ----------------------

SIST EN 10263-4:2002
EUROPEAN STANDARD
EN 10263-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2001
ICS 77.140.60; 77.140.65
English version
Steel rod, bars and wire for cold heading and cold extrusion -
Part 4: Technical delivery conditions for steels for quenching and
tempering
Barres, fil machine et fils en acier pour transformation à Walzdraht, Stäbe und Draht aus Kaltstauch- und
froid et extrusion à froid - Partie 4: Conditions techniques Kaltfließpreßstählen - Teil 4: Technische Lieferbedingungen
de livraison des aciers pour trempe et revenu für Vergütungsstähle
This European Standard was approved by CEN on 19 April 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10263-4:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 10263-4:2002
Page 2
EN 10263-4:2001
CONTENTS
Page
FOREWORD. 3
1 Scope . 4
2 Normative references. 4
3 Terms and definitions. 4
4 Classification and designation . 4
4.1 Classification . 4
4.2 Designation . 4
5 Production Process . 4
5.1 Steelmaking process. 4
5.2 Deoxidation . 4
6 Requirements . 5
6.1 Delivery conditions . 5
6.2 Chemical composition . 5
6.3 Mechanical properties . 5
6.4 Hardenability . 5
6.5 Surface requirements. 5
6.6 Supplementary or special requirements. 5

...