EN 1013:2012
(Main)Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
This European Standard specifies the requirements for light transmitting single skin profiled plastics sheets for internal and external walls, roofs and ceilings. It is applicable to single skin sheets which are used as a single layer or when assembled to form a multiple layer construction.
It also specifies the test methods and provides for the evaluation of conformity and marking of the sheets.
Lichtdurchlässige, einschalige profilierte Platten aus Kunststoff für Innen- und Außenanwendungen an Dächern, Wänden und Decken - Anforderungen und Prüfverfahren
Diese Europäische Norm legt die Anforderungen an lichtdurchlässige, einschalige, profilierte Platten aus Kunststoff für Innen- und Außenanwendungen an Wänden, Dächern und Decken fest. Es ist anwendbar auf einschalige Platten, die als eine Lage oder zum Herstellen eines mehrlagigen Aufbaus verwendet werden.
Die Norm legt auch die Prüfverfahren fest und dient der Konformitätsbewertung und Kennzeichnung der Platten.
Plaques d'éclairement profilées, simple paroi, en matière plastique, pour toitures, bardages et plafonds intérieurs et extérieurs - Exigences et méthodes d'essai
La présente Norme européenne spécifie les exigences relatives aux plaques d'éclairement profilées, simple paroi, en matière plastique pour toitures, bardages et plafonds, intérieurs et extérieurs. Elle est applicable aux plaques simple paroi qui sont mise en œuvre sous forme d'une couche unique ou assemblées pour former une construction à plusieurs couches.
Elle spécifie également les méthodes d'essai ainsi que l'évaluation de la conformité et le marquage des plaques.
Prosojne enoslojne profilirane polimerne plošče za notranje in zunanje strehe, stene in stropove - Zahteve in preskusne metode
Ta evropski standard določa zahteve za prosojne enoslojne profilirane polimerne plošče za notranje in zunanje strehe, stene in stropove. Velja za enoslojne plošče, ki se uporabljajo kot posamezen sloj ali so zložene skupaj in tvorijo večslojno tvorbo. Določa tudi preskusne metode ter podaja vrednotenje skladnosti in označevanje plošč.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtdurchlässige, einschalige profilierte Platten aus Kunststoff für Innen- und Außenanwendungen an Dächern, Wänden und Decken - Anforderungen und PrüfverfahrenPlaques d'éclairement profilées, simple paroi, en matière plastique, pour toitures, bardages et plafonds intérieurs et extérieurs - Exigences et méthodes d'essaiLight transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods91.060.20StreheRoofs91.060.30Stropi. Tla. StopniceCeilings. Floors. Stairs83.140.10Filmi in folijeFilms and sheets91.060.10Stene. Predelne stene. FasadeWalls. Partitions. FacadesICS:Ta slovenski standard je istoveten z:EN 1013:2012SIST EN 1013:2013en,fr,de01-marec-2013SIST EN 1013:2013SLOVENSKI
STANDARDSIST EN 1013-4:2000SIST EN 1013-5:2000SIST EN 1013-3:1998SIST EN 1013-1:1998SIST EN 1013-2:20001DGRPHãþD
SIST EN 1013:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1013
December 2012 ICS 83.140.10; 91.060.01 Supersedes EN 1013-1:1997, EN 1013-2:1998, EN 1013-3:1997, EN 1013-4:2000, EN 1013-5:2000English Version
Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
Plaques d'éclairement profilées, simple paroi, en matière plastique, pour toitures, bardages et plafonds intérieurs et extérieurs - Exigences et méthodes d'essai
Lichtdurchlässige, einschalige profilierte Platten aus Kunststoff für Innen- und Außenanwendungen an Dächern, Wänden und Decken - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 20 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1013:2012: ESIST EN 1013:2013
EN 1013:2012 (E) 2 Contents Page Foreword .4Introduction .51 Scope .62 Normative references .63 Terms and definitions .74 Symbols and abbreviations .74.1 Symbols .74.2 Abbreviations .85 Requirements .85.1 Visual appearance .85.2 Dimensional tolerances and mass per square metre .85.3 Light transmission .95.4 Flexural/tensile streng
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.