EN 14783:2013
(Main)Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
This European Standard specifies the terminology, requirements and test methods for metal coil, strip, and flat sheets and factory made pieces intended for fully supported applications in roofing and wall cladding or lining. It does not apply to products manufactured on site.
This European Standard covers fully-supported aluminium, copper, lead, steel, stainless steel and zinc products with or without coatings, e.g. metallic, organic, inorganic or multi-layer (see Annex A).
This European Standard also includes rules for marking, labelling and evaluation of conformity.
Requirements concerning acoustical and insulation properties are not considered in this European Standard.
This European Standard does not include calculation or design requirements with regards to the works, installation techniques or the performance of the installed products.
Vollflächig unterstützte Dachdeckungs- und Wandbekleidungselemente für die Innen- und Außenanwendung aus Metallblech - Produktspezifikation und Anforderungen
Diese Europäische Norm legt die Terminologie, Anforderungen und Prüfverfahren für Metallrollen, Bänder und Flachbleche sowie werkmäßig hergestellte Stücke fest, die für vollflächig unterstützte Dachdeckungs- und Wandbekleidungsanwendungen geliefert werden. Die Norm gilt nicht für Produkte, die auf der Baustelle hergestellt werden.
Diese Europäische Norm gilt für vollflächig unterstützte Produkte aus Aluminium, Kupfer, Blei, Stahl, nicht-rostendem Stahl und Zink mit oder ohne Beschichtungen, die z. B. metallisch, organisch, anorganisch oder mehrschichtig sein können (siehe Anhang A).
Diese Europäische Norm enthält auch Regeln für die Kennzeichnung und Beschriftung sowie für die Konformitätsbewertung.
Diese Europäische Norm enthält keine Anforderungen zu den akustischen und Dämmeigenschaften.
Diese Europäische Norm enthält keine Bemessungs- oder Konstruktionsanforderungen hinsichtlich der Arbeits- oder Einbautechniken oder der Leistungsfähigkeit der eingebauten Produkte.
Tôles et bandes métalliques totalement supportées pour couverture, bardages extérieur et intérieur - Spécification de produit et exigences
La présente Norme européenne spécifie la terminologie, les prescriptions et les méthodes d’essai pour les bobines, les bandes et les tôles planes métalliques et les éléments fabriqués en usine destinés à des applications totalement supportées en toiture et bardages extérieur et intérieur. Elle ne s’applique pas aux produits fabriqués sur site.
La présente Norme européenne couvre les produits totalement supportés en aluminium, cuivre, plomb, acier, acier inoxydable et zinc avec ou sans revêtement, par exemple métallique, organique, inorganique ou multicouche (voir Annexe A).
La présente Norme européenne comporte également des règles relatives au marquage, à l’étiquetage et à l’évaluation de la conformité.
Les prescriptions relatives aux caractéristiques acoustiques et aux caractéristiques d’isolation ne sont pas considérées dans la présente Norme européenne.
La présente Norme européenne ne comporte pas de prescriptions relatives au calcul et à la conception des ouvrages, aux techniques d’installation ou à la performance des produits installés.
Povsem podprta pločevina in trakovi za pokrivanje streh ter zunanje in notranje obloge - Specifikacija za izdelek in zahteve
Ta evropski standard določa terminologijo, zahteve in preskusne metode za kovinsko tuljavo, trakove, ploščato pločevino in tovarniško izdelane kose, ki so namenjeni uporabi s povsem podprtimi strehami ter zunanjimi in notranjimi oblogami. Ne uporablja se za izdelke, ki se izdelajo na kraju samem. Ta evropski standard zajema povsem podprte izdelke iz aluminija, bakra, svinca, jekla, nerjavnega jekla in cinka z ali brez prevlek, npr. železnih, organskih, neorganskih ali večplastnih (glej dodatek A). Ta evropski standard vključuje tudi pravila za označevanje, etiketiranje in ocenjevanje skladnosti. Ta evropski standard ne zajema zahtev, ki se nanašajo na akustične in izolacijske lastnosti. Ta evropski standard ne vključuje zahtev za načrtovanje ali računanje, ki se nanašajo na delo, tehnike za namestitev ali zmogljivost nameščenih izdelkov.
General Information
- Status
- Published
- Publication Date
- 30-Apr-2013
- Technical Committee
- CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
- Drafting Committee
- CEN/TC 128/SC 7 - Roofing products from metal sheet
- Current Stage
- 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
- Start Date
- 02-Dec-2025
- Completion Date
- 02-Dec-2025
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 04-Apr-2012
Overview
EN 14783:2013 - Fully supported metal sheet and strip for roofing, external cladding and internal lining - is a European product specification by CEN that defines terminology, requirements and test methods for metal coil, strip and flat sheet intended for fully supported applications. It covers aluminium, copper, lead, steel, stainless steel and zinc products - with or without metallic, organic, inorganic or multi‑layer coatings (see Annex A). The standard addresses product properties, conformity assessment, marking and labelling but does not cover on‑site manufacturing, installation design or acoustic/insulation performance.
Key topics and technical requirements
- Materials: Substrates shall comply with the relevant material standards referenced in EN 14783 (e.g. EN 501–507, EN 12588). Multilayer coated steel has additional requirements in Annex A.
- Nominal thickness: Minimum nominal substrate thicknesses are specified per metal (e.g. aluminium, copper, steel, stainless steel, zinc, lead) - Member States may require greater values.
- Dimensional behaviour: Thermal expansion coefficients are provided for common metals (aluminium, copper, lead, steel, stainless steel, zinc) to account for dimensional change.
- Dimensional tolerances: Tolerances from the applicable metal roof product standards (EN 501–507, EN 12588) apply.
- Permeability: Products without defects are regarded as water-, air- and vapour‑impermeable; absence of holes is verified by inspection.
- Durability and coatings: Manufacturers must declare metal grade, coating type/thickness/mass and expected durability for the intended environment.
- Fire performance: External fire performance and reaction to fire classification are covered; relevant test standards (e.g. EN 13823, EN ISO 11925‑2, EN 13501‑5) are referenced.
- Release of dangerous substances: Provision for declarations where regulatory requirements apply.
- Conformity & testing: Rules for Initial Type Testing (ITT), Factory Production Control (FPC), sampling, marking and labelling are included to support conformity assessment and CE marking (see Annex ZA).
Applications and users
- Manufacturers of metal coils, strips, sheets and factory‑made pieces for roofing, façade cladding and internal lining - to define product specifications and declare conformity.
- Product testing laboratories and certification bodies - for ITT and FPC procedures and fire/performance testing.
- Architects, specifiers and consultants - to select compliant fully supported metal products and verify declared properties (thickness, coatings, durability, fire class).
- Regulators and procurement teams - for compliance, labeling and CE marking checks.
Related standards
EN 14783 references and aligns with several material and test standards, including:
- EN 501–507, EN 12588 (material/specification standards for zinc, stainless steel, copper, steel, aluminium, lead)
- EN 13823, EN ISO 11925‑2, EN 13501‑5 (reaction and external fire tests)
- CEN/TS 1187 (external fire exposure to roofs)
Keywords: EN 14783:2013, fully supported metal sheet, roofing specification, cladding product requirements, metal roofing standards, multilayer coated steel, product conformity.
Frequently Asked Questions
EN 14783:2013 is a standard published by the European Committee for Standardization (CEN). Its full title is "Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements". This standard covers: This European Standard specifies the terminology, requirements and test methods for metal coil, strip, and flat sheets and factory made pieces intended for fully supported applications in roofing and wall cladding or lining. It does not apply to products manufactured on site. This European Standard covers fully-supported aluminium, copper, lead, steel, stainless steel and zinc products with or without coatings, e.g. metallic, organic, inorganic or multi-layer (see Annex A). This European Standard also includes rules for marking, labelling and evaluation of conformity. Requirements concerning acoustical and insulation properties are not considered in this European Standard. This European Standard does not include calculation or design requirements with regards to the works, installation techniques or the performance of the installed products.
This European Standard specifies the terminology, requirements and test methods for metal coil, strip, and flat sheets and factory made pieces intended for fully supported applications in roofing and wall cladding or lining. It does not apply to products manufactured on site. This European Standard covers fully-supported aluminium, copper, lead, steel, stainless steel and zinc products with or without coatings, e.g. metallic, organic, inorganic or multi-layer (see Annex A). This European Standard also includes rules for marking, labelling and evaluation of conformity. Requirements concerning acoustical and insulation properties are not considered in this European Standard. This European Standard does not include calculation or design requirements with regards to the works, installation techniques or the performance of the installed products.
EN 14783:2013 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products; 77.150.01 - Products of non-ferrous metals in general; 91.060.10 - Walls. Partitions. Facades; 91.060.20 - Roofs. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14783:2013 has the following relationships with other standards: It is inter standard links to EN 14783:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14783:2013 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/121, M/122. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 14783:2013 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vollflächig unterstützte Dachdeckungs- und Wandbekleidungselemente für die Innen- und Außenanwendung aus Metallblech - Produktspezifikation und AnforderungenTôles et bandes métalliques totalement supportées pour couverture, bardages extérieur et intérieur - Spécification de produit et exigencesFully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements91.060.20StreheRoofs91.060.10Stene. Predelne stene. FasadeWalls. Partitions. Facades77.140.50SROL]GHONLFlat steel products and semi-productsICS:Ta slovenski standard je istoveten z:EN 14783:2013SIST EN 14783:2013en,fr,de01-junij-2013SIST EN 14783:2013SLOVENSKI
STANDARDSIST EN 14783:20061DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14783
May 2013 ICS 77.140.50; 77.150.01; 91.060.10; 91.060.20 Supersedes EN 14783:2006English Version
Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
Tôles et bandes métalliques totalement supportées pour couverture, bardages extérieur et intérieur - Spécification de produit et exigences
Vollflächig unterstützte Dachdeckungs- und Wandbekleidungselemente für die Innen- und Außenanwendung aus Metallblech - Produktspezifikation und Anforderungen This European Standard was approved by CEN on 24 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14783:2013: ESIST EN 14783:2013
Multilayer coated steel sheet . 15 A.1 General . 15 A.2 Substrate material. 15 A.3 Specific requirements . 15 A.3.1 Minimum nominal values of thickness . 15 A.3.2 Bituminous coating specification . 15 A.3.3 Durability . 16 A.4 Freedom from defects . 16 Annex B (normative)
Test conditions for the reaction to fire tests . 17 B.1 General . 17 B.2 Mounting and fixing conditions of test specimens in the SBI test . 17 B.2.1 General . 17 SIST EN 14783:2013
Clauses of this European Standard addressing the provisions of EU Construction Products Directive . 20 ZA.1 Scope and relevant characteristics . 20 ZA.2 Procedure(s) for the attestation of conformity of products . 21 ZA.2.1 Systems of attestation of conformity . 21 ZA.2.2 EC Certificate and Declaration of conformity . 24 ZA.3 CE marking and labelling. 25 Bibliography . 28
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
PCS ≤ 4,0 MJ/m2 or a mass ≤ 200 g/m2. NOTE Individual Member States may have "deemed to satisfy" lists which go beyond the list given in the Commission Decision 2000/553/EC. 5.1.2 Products classified without the need for further testing The following products are considered to be classified in classes B ROOF(t1), B ROOF(t2), B ROOF(t3) and B ROOF(t4) without further testing in accordance with Commission Decision 2005/403/EC: profiled steel sheets, flat steel sheets or panels of coil coated galvanised or zinc-aluminium alloy coated steel of metal thickness ≥ 0,40 mm with an organic external (weather side) coating and, optionally, a reverse (internal) side organic coating. The external coating is of a liquid-applied Plastisol paint of maximum nominal dry film thickness 0,2 mm, a PCS of not greater than 8,0 MJ/m2 and a maximum dry mass of 330 g/m2. The reverse side organic coating (if any) shall have a PCS of not greater than 4,0 MJ/m2 and a maximum dry mass of 200 g/m2. NOTE Reference will be made to Commission Decision 2005/403/EC for full details of the product and constructions. 5.1.3 Other products Products not meeting the definitions as given in 5.1.1 or 5.1.2 shall be tested in accordance with the relevant method(s) in CEN/TS 1187 and classified in accordance with EN 13501-5. The products to be tested shall be installed, in addition to the general provisions given in CEN/TS 1187, in a manner representative of their intended use. SIST EN 14783:2013
NOTE An informative database covering European and national provisions on dangerous substances is available at the Construction web site on EUROPA accessed through: http://ec.europa.eu/enterprise/construction/cpd-ds/ 6 Evaluation of conformity 6.1 General The conformity of the products covered by this European Standard with the requirements of this European Standard and with the declared values (including classes) shall be demonstrated by: initial type testing comprising tests or other means of assessment; factory production control by the manufacturer. If the base material is supplied with information about some or all characteristics required by this European Standard, the re-evaluation of these characteristics is not required for compliance with this European Standard as long as the production process does not change these characteristics. For the purposes of testing, the products may be grouped into families where it is considered the results for a given characteristic from any one product in the family are representative of all other products within that same family. A family may be formed for only one characteristic or more than one characteristic. Products within one family for one characteristic may or may not be within the same family in respect of other characteristics. 6.2 Initial type testing (ITT) 6.2.1 General Initial type testing shall be performed to show conformity with this European Standard. SIST EN 14783:2013
Table 3 have not been declared for the base material in accordance with Table 2 or are changed during the production process, the manufacturer claiming compliance with this European Standard shall assess and declare the characteristics of Table 3 that have not been declared. The base material may be presumed to have the performances stated of them by their supplier, although this does not replace the responsibility on the roofing, cladding or lining product manufacturer to ensure that only a base material having the correct values of characteristics to allow the finished roofing, cladding or lining product to meet the requirements of this European Standard is used. All characteristics in Clause 4 shall be subject to initial type testing, with the following exceptions: external fire performance when using the CWFT option, in accordance with 5.1.2 or when deemed to satisfy in accordance with 5.1.1 (although measurement may be required to ensure that the product meets the definition required for CWFT and deemed to satisfy); reaction to fire when deemed to satisfy Class A1, in accordance with 5.2.1; release of dangerous substances that may be assessed indirectly by controlling the content of the substance concerned. Whenever a change occurs in the base material, the finished product or the production process (subject to the definition of a family), which could change significantly one or more of the characteristics, the type tests shall be repeated for the appropriate characteristic(s). The results of the initial type testing shall be recorded and held by the manufacturer for at least ten years after the end of production of the product to which they apply. SIST EN 14783:2013
...
Die Norm EN 14783:2013 bietet eine umfassende Grundlage für die Spezifikation und die Anforderungen von voll unterstützten Metallschichten und -streifen, die in der Dachdeckung, der Außenverkleidung und der Innenverkleidung eingesetzt werden. Der Umfang dieser Europäischen Norm ist klar definiert und bezieht sich ausschließlich auf Produkte, die für voll unterstützte Anwendungen konzipiert sind, was eine gezielte Anwendung in bestimmten Bereichen ermöglicht. Ein herausragendes Merkmal dieser Norm ist die Vielfalt der abgedeckten Materialien. Sie umfasst Aluminium, Kupfer, Blei, Stahl, Edelstahl und Zink, sowohl mit als auch ohne Beschichtungen. Diese Vielfalt bietet Herstellern und Anwendern eine breite Auswahl an Materialien für unterschiedliche Anwendungen und sorgt für Flexibilität in der Planung und Umsetzung von Bauprojekten. Darüber hinaus werden spezifische Anforderungen für die Kennzeichnung, die Etikettierung und die Bewertung der Konformität für diese Produkte festgelegt, was die Transparenz und Nachvollziehbarkeit im Fertigungs- und Prüfprozess erhöht. Die Norm definiert auch klare Testmethoden, um sicherzustellen, dass die Produkte die festgelegten Anforderungen erfüllen. Dies trägt dazu bei, die Qualität der Materialien zu gewährleisten und das Vertrauen der Anwender in die Produkte zu stärken. Obwohl akustische und isolierende Eigenschaften in dieser Norm nicht berücksichtigt sind, konzentriert sie sich auf die mechanischen und physikalischen Eigenschaften der Materialien, was für die meisten Anwendungen im Bereich der Dach- und Wandverkleidung von entscheidender Bedeutung ist. Die EN 14783:2013 ist besonders relevant für Architekten, Bauingenieure und Hersteller, die sich mit der Planung und Ausführung von Gebäuden beschäftigen. Sie bietet eine solide Grundlage für die Auswahl geeigneter Materialien und die Einhaltung von Standards in Europa. Die klare Fokussierung auf voll unterstützte Anwendungen ermöglicht es, spezifische Anforderungen gezielt zu adressieren und sicherzustellen, dass die Produkte für die vorgesehenen Einsatzzwecke optimal geeignet sind. Insgesamt stellt die Norm EN 14783:2013 ein wichtiges Instrument dar, das die Qualität und Sicherheit von Metallschichten und -streifen für Dach- und Wandverkleidungen gewährleistet und somit einen wertvollen Beitrag zur Bauindustrie leistet.
The EN 14783:2013 standard provides a comprehensive framework for the specification and requirements of fully supported metal sheets and strips used in roofing, external cladding, and internal lining applications. Its clearly defined scope includes terminology, requirements, and test methods for a variety of metals, specifically detailing materials such as aluminium, copper, lead, steel, stainless steel, and zinc, both with and without coatings. This inclusivity ensures that the standard is highly relevant as it accommodates a broad range of products employed in construction, promoting uniformity across the industry. One of the notable strengths of EN 14783:2013 is its meticulous approach to marking, labelling, and evaluating conformity, which enhances transparency and reliability in the application of metal products within the construction sector. By establishing clear guidelines for identification and compliance, the standard facilitates easier tracking and quality assurance, thereby supporting best practices in product usage and installer confidence. Moreover, while this standard appropriately confines its focus to product specifications, it is essential to note that it does not delve into acoustical or insulation properties, nor does it address calculation or design requirements needed for installation techniques or performance aspects. This limitation is balanced by the strength and clarity of the specification it offers, making it an integral part of ensuring that metal products meet essential performance criteria for their designated applications. Overall, the EN 14783:2013 standard is a vital document for professionals in the construction and manufacturing sectors, as it lays a robust foundation for quality and compliance in the use of fully supported metal sheets and strips. Its alignment with current industry practices makes it not only relevant but also essential for guiding the effective implementation of roofing and cladding projects across Europe.
La norme EN 14783:2013 spécifie les conditions nécessaires pour les feuilles et bandes métalliques utilisées dans la toiture, le bardage extérieur et le revêtement intérieur. Elle s'applique spécifiquement aux produits en aluminium, cuivre, plomb, acier, acier inoxydable et zinc, qu'ils soient revêtus ou non par des matériaux métalliques, organiques, inorganiques ou multicouches, ce qui en fait une référence précieuse dans le domaine de la construction. Un des points forts de cette norme est sa clarté dans la terminologie utilisée, offrant ainsi un cadre solide pour les fabricants et les entrepreneurs. Les exigences relatives aux méthodes d'essai garantissent que les produits répondent aux normes de qualité et de sécurité, ce qui est essentiel pour les applications pleinement supportées. Par ailleurs, la norme établit des règles précises concernant le marquage, l'étiquetage et l'évaluation de la conformité, assurant ainsi une transparence et une traçabilité des produits sur le marché. En ce qui concerne la portée, il est important de noter qu'EN 14783:2013 exclut les produits fabriqués sur site, se concentrant uniquement sur les solutions industrielles prêtes à l'emploi. Bien que la norme n'aborde pas les exigences acoustiques ou d'isolation, elle reste pertinente pour quiconque cherche à garantir la conformité et la fiabilité des matériaux utilisés dans les constructions. En somme, cette norme européenne est d'une grande importance pour les professionnels de la construction, car elle fournit des spécifications claires et des exigences rigoureuses pour les feuilles et bandes métalliques, soutenant ainsi la durabilité et la performance des bâtiments modernes.
SIST EN 14783:2013は、金属コイル、ストリップ、フラットシート、または工場製品の屋根および壁のクラッディングやライニングにおける完全支持アプリケーションに向けた製品仕様と要件を定めた、欧州標準です。この標準は、建設現場で製造された製品には適用されない点がポイントです。 この標準の強みは、アルミニウム、銅、鉛、鋼、ステンレス鋼、亜鉛など、さまざまな金属製品に対応していることです。これにより、多様な材料の選択肢が提供され、設計者や施工者がニーズに応じた適切な素材を選びやすくなります。また、製品にはコーティングの有無にかかわらず適用されるため、ユーザーはさらに柔軟な選択肢を持つことができます。 さらに、SIST EN 14783:2013は、マーキング、ラベリング、および適合評価のルールを含んでいるため、製品のトレーサビリティが向上します。これにより、消費者や業者は購入や施工の際に安心感を得ることができるでしょう。 ただし、音響および断熱特性に関する要件は考慮されていないため、これらの特性を重視する場合は、別途標準や仕様を参照する必要があります。また、計算や設計要件、施工技術、設置製品の性能についても含まれていないため、実際のアプリケーションにおいては他の資料と併用することが重要です。 この標準は、金属製屋根および壁材の選定において中心的な役割を果たしており、品質の高い建材の使用を促進するために非常に重要な文書です。そのため、施工業者やデザイナーにとって、SIST EN 14783:2013は必須のガイドラインとなるでしょう。
SIST EN 14783:2013 표준은 지붕 및 외부 클라이딩, 내부 라이닝을 위한 완전 지지형 금속 시트 및 스트립의 제품 사양과 요구 사항을 규정합니다. 이 표준은 금속 코일, 스트립 및 평면 시트 그리고 공장에서 제조된 제품을 포함하여 완전 지지 애플리케이션에 적합한 제품의 용어와 요구 사항, 시험 방법을 명확히 합니다. 주목할 점은 이 표준이 현장에서 제조된 제품에는 적용되지 않는다는 점입니다. 이 유럽 표준은 알루미늄, 구리, 납, 강철, 스테인리스 스틸 및 아연 제품을 포함하며, 코팅 여부에 관계없이 적용됩니다. 이와 같은 광범위한 소재가 포함되어 있어 다양한 건축 및 설계 요구 사항을 충족할 수 있는 점이 강점입니다. 또한, 금속 제품의 마킹, 라벨링 및 적합성 평가에 관한 규칙 또한 상세히 포함되어 실질적인 적용 가능성을 크게 높입니다. 이 표준은 설치된 제품의 성능이나 설치 기법, 설계 요구 사항에 대해서는 다루고 있지 않으며, 음향 및 단열 성능에 관한 요구 사항 또한 포함되지 않습니다. 그러나 이와 같은 제한 사항에도 불구하고, SIST EN 14783:2013은 금속 제품의 품질 및 안전성 확보에 중대한 역할을 할 수 있는 신뢰할 수 있는 기준으로 작용합니다. 본 표준은 건축물의 외부 및 내부 마감재에 사용되는 금속 제품의 품질과 안정성을 보장하기 위한 필요조건을 제공합니다. 따라서 이 표준은 다양한 건축 응용 분야와 관련된 중요성을 지니고 있으며, 관련 산업에서 필수적인 기준으로 자리매김하고 있습니다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...