EN ISO 6270-1:2018
(Main)Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017)
Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017)
ISO 6270-1:2017 specifies a method for determining the resistance of paint films, paint systems and related products to conditions of condensation in accordance with the requirements of coating or product specifications.
The method is applicable to coatings, both on porous substrates such as wood, plaster and plasterboard and on non-porous substrates such as metal. It provides an indication of the performance likely to be obtained under severe conditions of exposure where continuous condensation occurs on the surface.
The procedure can reveal failures of the coating (including blistering, staining, softening, wrinkling and embrittlement) and deterioration of the substrate.
NOTE The shape and preparation of the test specimens, the duration of the test and the assessment of the test results are not covered by this document.
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Feuchtigkeit - Teil 1: Kondensation (einseitige Beanspruchung) (ISO 6270-1:2017)
Dieses Dokument legt ein Verfahren zum Bestimmen der Beständigkeit von Beschichtungen, Beschichtungssystemen und ähnlichen Produkten unter den Bedingungen von Kondensation fest, entsprechend den Anforderungen in Beschichtungs- oder Produktspezifikationen.
Das Verfahren ist anwendbar bei Beschichtungen sowohl auf porösen Substraten wie Holz, Gips und Gips-karton, als auch auf nichtporösen Substraten wie Metallen. Es gibt Hinweise, wie sich die Beschichtung unter harten Beanspruchungsbedingungen verhalten wird, bei denen kontinuierliche Kondensation auf der Oberfläche auftritt.
Das Verfahren kann Fehlfunktionen der Beschichtung (wie Blasenbildung, Verfärbung, Erweichen, Runzel-bildung und Versprödung) und eine Schädigung des Substrates aufdecken.
ANMERKUNG Probenform, Probenvorbereitung, Prüfdauer und Beurteilung der Ergebnisse sind nicht Gegen¬stand dieses Dokumentes.
Peintures et vernis - Détermination de la résistance à l'humidité - Partie 1: Condensation (exposition sur une seule face) (ISO 6270-1:2017)
ISO 6270-1:2017 spécifié une méthode pour la détermination de la résistance d'un feuil de peinture, de systèmes de peinture et de produits assimilés à des conditions de condensation selon les exigences du revêtement ou les spécifications du produit.
La méthode est applicable aux revêtements aussi bien sur subjectiles poreux, tels que le bois, le plâtre et les plaques de plâtre, que sur subjectiles non poreux, tels que le métal. Elle donne une indication sur la performance susceptible d'être obtenue dans des conditions sévères d'exposition lorsqu'une condensation continue se produit à la surface.
Le mode opératoire peut révéler des défectuosités du revêtement (comprenant cloquage, tachage, ramollissement, frisage et fragilisation) et une détérioration du subjectile.
NOTE La forme et la préparation des éprouvettes d'essai, la durée de l'essai et l'évaluation des résultats d'essai ne sont pas couverts par le présent document.
Barve in laki - Ugotavljanje odpornosti proti vlagi - 1. del: Kondenzacija (izpostavljenost ene strani) (ISO 6270-1:2017)
Ta dokument določa metodo za ugotavljanje odpornosti premaznih filmov, premaznih sistemov in sorodnih izdelkov v pogojih kondenzacije v skladu z zahtevami glede premazov ali specifikacij proizvoda.
Metoda se uporablja za premaze tako na poroznih podlagah, kot so les, mavec in mavčne plošče, kot na neporoznih podlagah, kot je kovina. Zagotavlja navedbo učinkovitosti v pogojih hude izpostavljenosti, kjer se na površini neprekinjeno ustvarja kondenzacija.
Postopek lahko razkrije pomanjkljivosti premaza (vključno z mehurčki, madeži, mehčanjem, gubanjem in krhkostjo) in poslabšanje kakovosti podlage.
OPOMBA: Ta dokument ne zajema oblike in priprave preskusnih primerkov, trajanja preskusa in tolmačenja rezultatov preskusa.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2018
1DGRPHãþD
SIST EN ISO 6270-1:2002
Barve in laki - Ugotavljanje odpornosti proti vlagi - 1. del: Kondenzacija
(izpostavljenost ene strani) (ISO 6270-1:2017)
Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation
(single-sided exposure) (ISO 6270-1:2017)
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Feuchtigkeit - Teil 1:
Kondensation (einseitige Beanspruchung) (ISO 6270-1:2017)
Peintures et vernis - Détermination de la résistance à l'humidité - Partie 1: Condensation
(exposition sur une seule face) (ISO 6270-1:2017)
Ta slovenski standard je istoveten z: EN ISO 6270-1:2018
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 6270-1
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2018
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 6270-1:2001
English Version
Paints and varnishes - Determination of resistance to
humidity - Part 1: Condensation (single-sided exposure)
(ISO 6270-1:2017)
Peintures et vernis - Détermination de la résistance à Beschichtungsstoffe - Bestimmung der Beständigkeit
l'humidité - Partie 1: Condensation (exposition sur une gegen Feuchtigkeit - Teil 1: Kondensation (einseitige
seule face) (ISO 6270-1:2017) Beanspruchung) (ISO 6270-1:2017)
This European Standard was approved by CEN on 30 October 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6270-1:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 6270-1:2018) has been prepared by Technical Committee ISO/TC 35/SC 9
"General test methods for paints and varnishes" in collaboration with Technical Committee CEN/TC 139
“Paints and varnishes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2018, and conflicting national standards shall be
withdrawn at the latest by July 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6270-1:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 6270-1:2017 has been approved by CEN as EN ISO 6270-1:2018 without any
modification.
INTERNATIONAL ISO
STANDARD 6270-1
Second edition
2017-11
Paints and varnishes — Determination
of resistance to humidity —
Part 1:
Condensation (single-sided exposure)
Peintures et vernis — Détermination de la résistance à l'humidité —
Partie 1: Condensation (exposition sur une seule face)
Reference number
ISO 6270-1:2017(E)
©
ISO 2017
ISO 6270-1:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 6270-1:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Limitations . 1
5 Principle . 2
6 Apparatus . 2
7 Test specimen . 4
8 Procedure. 4
9 Evaluation . 4
10 Precision . 4
11 Test report . 4
Bibliography . 6
ISO 6270-1:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
This second edition cancels and replaces the first edition (ISO 6270-1:1998), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— the title has been changed;
— the terms and definitions clause has been added;
— a limitations clause concerning the use of other than standard test conditions has been added;
— the preparation of test specimens from liquid paints has been deleted, so only the exposure of coated
specimens is described;
— the normative requirement on evaluation in accordance with ISO 4628 has been deleted; information
has been moved to the introduction, as it is in ISO 6270-2;
— the size of the test specimens has been changed;
[1]
— the requirement to use water of grade 3 purity in accordance with ISO 3696 was deleted;
— a clause on installation of the apparatus has been added;
— the precision has been clarified;
— the normative references have been updated;
— the supplementary test conditions previously in Clause 4 and Annex A have been integrated in the
test report, as appropriate, or deleted.
A list of all the parts in the ISO 6270 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved
ISO 6270-1:2017(E)
Introduction
This document is intended to give consistent conditions and procedures for the conditioning of pre-
prepared test specimens which are to be evaluated for defects, which may develop when they are
subjected to humid ambient atmospheres such as constant condensation-water atmospheres or
alternating condensation-water atmospheres.
The tests are designed to clarify the behaviour of the test specimens in humid ambient atmospheres,
and to pinpoint any defects in the protection of the test specimens against corrosion. The testing of
coatings in these atmospheres does not necessarily give lifetime prediction data.
After conditioning, the test specimens are evaluated either in accordance with agreed documents, such
[2]
as the appropriate part(s) of ISO 4628 , or by procedures agreed between the interested parties.
INTERNATIONAL STANDARD ISO 6270-1:2017(E)
Paints and varnishes — Determination of resistance to
humidity —
Part 1:
Condensation (single-sided exposure)
1 Scope
This document specifies a method for determining the resistance of paint films, paint systems and
related products to conditions of condensation in accordance with the requirements of coating or
product specifications.
The method is applicable to coatings, both on porous substrates such as wood, plaster and plasterboard
and on non-porous substrates such as metal. It provides an indication of the performance likely to be
obtained under severe conditions of exposure where continuous condensation occurs on the surface.
The procedure can reveal failures of the coating (including blistering, staining, softening, wrinkling
and embrittlement) and deterioration of the substrate.
NOTE The shape and preparation of the test specimens, the duration of the test and the assessment of the
test r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.