iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13523-26:2014

(Main)

Coil coated metals - Test methods - Part 26: Resistance to condensation of water

Coil coated metals - Test methods - Part 26: Resistance to condensation of water

This Part of EN 13523 specifies a procedure for evaluating the condensation resistance of an organic coating (coil coating) on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.

Bandbeschichtete Metalle - Prüfverfahren - Teil 26: Beständigkeit gegen Kondenswasser

Dieser Teil von EN 13523 legt ein Verfahren zum Bewerten der Beständigkeit einer organischen Beschichtung auf einem metallischen Substrat gegen kontinuierliche Kondensation durch Beanspruchung in einer Feuchtekammer  unter kontrollierten Bedingungen fest.

Tôles prélaquées - Méthodes d'essai - Partie 26: Résistance à la condensation de l'eau

La présente partie de l’EN 13523 spécifie une méthode permettant d’évaluer la résistance à la condensation continue d’un revêtement organique déposé sur un subjectile métallique, via l’exposition dans une enceinte à atmosphère humide dans des conditions contrôlées.

Prevlečene kovine, ki se navijajo - Preskusne metode - 26. del: Odpornost proti kondenzaciji vode

Standard EN 13523-26 določa postopek za ocenjevanje odpornosti proti nenehni kondenzaciji vode na organski prevleki na kovinski podlagi pri izpostavljenosti vlažnosti pod nadzorovanimi pogoji.

General Information

Status
Withdrawn
Publication Date
17-Jun-2014
Withdrawal Date
08-Feb-2022
ICS
25.220.60 - Organic coatings
Technical Committee
CEN/TC 139 - Paints and varnishes
Drafting Committee
CEN/TC 139/WG 9 - Testing of coil coated metals
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
09-Feb-2022
Ref Project
SIST EN 13523-26:2014 - Coil coated metals - Test methods - Part 26: Resistance to condensation of water

Relations

Replaces
EN 13523-26:2006 - Coil coated metals - Test methods - Part 26: Resistance to condensation of water
Effective Date
25-Jun-2014
Replaced By
EN 13523-26:2022 - Coil coated metals - Test methods - Part 26: Resistance to condensation of water
Effective Date
16-Feb-2022

Buy Standard

EN 13523-26:2014EN 13523-26:2014
PreviousNext
Standard
EN 13523-26:2014
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 26: Beständigkeit gegen KondenswasserTôles prélaquées - Méthodes d'essai - Partie 26: Résistance à la condensation d'eauCoil coated metals - Test methods - Part 26: Resistance to condensation of water25.220.60Organske prevlekeOrganic coatings17.040.20Lastnosti površinProperties of surfacesICS:Ta slovenski standard je istoveten z:EN 13523-26:2014SIST EN 13523-26:2014en,fr,de01-september-2014SIST EN 13523-26:2014SLOVENSKI
STANDARDSIST EN 13523-26:20061DGRPHãþD



SIST EN 13523-26:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-26
June 2014 ICS 25.220.60 Supersedes EN 13523-26:2006English Version
Coil coated metals - Test methods - Part 26: Resistance to condensation of water
Tôles prélaquées - Méthodes d'essai - Partie 26: Résistance à la condensation de l'eau
Bandbeschichtete Metalle - Prüfverfahren - Teil 26: Beständigkeit gegen Kondenswasser This European Standard was approved by CEN on 7 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-26:2014 ESIST EN 13523-26:2014



EN 13523-26:2014 (E) 2 Contents Page
Foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle . 5 5 Apparatus . 5 5.1 Cabinet . 5 6 Sampling . 6 7 Test panels . 6 8 Procedure . 6 8.1 Exposure . 6 8.2 Evaluation . 7 9 Expression of results . 7 10 Precision . 7 11 Test report .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13523-23:2023(Main)
Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
SIST EN 13523-23:2023

This document describes the procedure for determining the resistance of an organic coating on a metallic substrate to humid atmospheres containing sulfur dioxide.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-14:2023(Main)
Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
SIST EN 13523-14:2023

This document describes the procedure for determining objectively the chalking resulting from natural or artificial weathering of an organic coating on a metallic substrate.
The advantage of this procedure for measuring chalking of an organic coating is that the result can be read off immediately on an instrument. Subjective judgement by visual comparison of test specimens with reference specimens is not necessary.
Reproducible results can only be obtained by careful execution of the test. Special attention is paid to the adhesive tape and its application to the test surface.
The test method is not applicable to embossed coatings. In the case of textured coatings, the degree of texture will influence readings. Also, dirt collection can influence readings on outdoor weathered specimens.
NOTE   Different methods for assessing chalking are in use. The results of these different methods are not comparable.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-26:2022(Main)
Coil coated metals - Test methods - Part 26: Resistance to condensation of water
SIST EN 13523-26:2022

This document specifies a procedure for evaluating the resistance to continuous condensation of an organic coating on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-9:2022(Main)
Coil coated metals - Test methods - Part 9: Resistance to water immersion
SIST EN 13523-9:2022

This document specifies the procedure for determining the resistance to water immersion of an organic coating on a metallic substrate.
The test is applicable to all kinds of organic coatings, including metallics and embossed, textured, pearlescent and printed coatings. The results of the test give an indication of the resistance of the coil coated metal to water.
The method is not intended to reproduce any particular condition of condensation.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-25:2022(Main)
Coil coated metals - Test methods - Part 25: Resistance to humidity
SIST EN 13523-25:2022

This document specifies a procedure for evaluating the resistance to humidity of an organic coating on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-2:2021(Main)
Coil coated metals - Test methods - Part 2: Gloss
SIST EN 13523-2:2021

This document specifies the procedure for determining the gloss of an organic coating on a metallic substrate. Gloss is a characteristic of fundamental importance to the appearance of the coil coated product.
The apparatus requires a flat specimen of size greater than the aperture, thus, uneven surfaces cannot be measured.
This method is applicable to all pigmented and unpigmented coatings including metallic/pearlescent coatings. However, for textured coatings it is only indicative.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-7:2021(Main)
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
SIST EN 13523-7:2021

This document specifies the procedure for determining the resistance to cracking of an organic coating on a metallic substrate when bent through 135° to 180°. The degree of adhesion can also be evaluated.
Both folding and mandrel methods are considered. The folding method is more often used for practical purposes but where more precise determinations are required, the mandrel method is the preferred method.
The cylindrical bend method can also be used for a pass/fail decision by using an agreed mandrel.
The choice of the appropriate test method is limited by the thickness and/or the hardness of the substrate.
The feasibility of the test depends on the type and thickness of the substrate. During the procedure, the mandrel is not intended to deform.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-3:2021(Main)
Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
SIST EN 13523-3:2021

This document specifies procedures for determining the instrumental colour difference (CIELAB) of an organic coating on a metallic substrate compared to another one used as a reference (usually called reference) and the metamerism depending on the illuminant.
When two colour specimens have identical spectral reflectance curves, they are matching under any illuminant irrespective of its spectral characteristics. This is termed a “spectral match”. It is also possible for two colour specimens having different spectral reflectance curves to match visually under a given light source but not to match under another light source with different spectral characteristics; such matches are termed “metameric”.
One quantitative description of metamerism is the so-called “metamerism index”.
Information on the metamerism index is of limited value where ΔE (instrumental colour difference for a given illuminant) is > 0,5. The metamerism index is not suited for determining the absolute colour difference or colour consistency of a given specimen at change of illuminant.
The colour difference under the reference illuminant is to be measured in colour coordinates L*, a* and b*.
Excluded from this method are organic coatings producing fluorescence and/or which are multicoloured, pearlescent or metallic.
Establishing a reference as well as the magnitude of an acceptable colour difference are not covered by this method.
Two methods are given in this document:
a)   instrumental colour difference measurement using a tristimulus colourimeter;
b)   instrumental colour difference measurement using a spectrophotometer or equivalent.
It is advised that care is taken when measuring e.g.
—   textured surfaces;
—   fluorescent coatings;
—   metameric coatings;
—   multi-coloured, pearlescent, metallic or special colour effect coatings.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-0:2021(Main)
Coil coated metals - Test methods - Part 0: General introduction
SIST EN 13523-0:2021

This document specifies the overall scope of all parts of EN 13523, gives definitions common to all parts and describes how sampling and preparation of test panels for most of the individual test methods are to be carried out.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-18:2020(Main)
Coil coated metals - Test methods - Part 18: Resistance to staining
SIST EN 13523-18:2020

This document specifies test procedures for assessing the effect of chemicals on the characteristics of an organic coating on a metallic substrate. It covers testing by using defined substances and to assess the change in characteristics such as discoloration, change in gloss, blistering, softening, swelling and loss of adhesion. Assessment of other phenomena can be agreed between the interested parties

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day